SIST EN 2680:2009

Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 235 °C

This standard specifies the characteristics of self-locking, floating, self-aligning, two lug anchor nuts, in alloy steel, cadmium plated, MoS2-lubricated.
Classification: 900 MPa  / 235 °C

Luft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, beiderseitiger Flansch, aus legiertem Stahl, verkadmet, MoS2-geschmiert, metrische Reihe - Klasse: 900 MPa (bei Raumtemperatur) / 235 °C

Diese Norm legt die Eigenschaften für Annietmuttern, selbstsichernd, schwenkbar, beiderseitiger Flansch, aus legiertem Stahl, verkadmet, MoS2-geschmiert, metrische Reihe, fest.
Klasse: 900 MPa )/235 °C )

Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, double patte, en acier allié, cadmiés, lubrifiés MoS2, série métrique - Classification: 900 MPa (à température ambiante) / 235 °C

Aeronavtika - Zakovne matice, samozapiralne, premične, samovarovalne, dvostranske, iz legiranega jekla, prevlečene s kadmijem, namazane z MoS2, metrska serija - Klasifikacija: 900 MPa (pri temperaturi okolice)/235 °C

General Information

• Status: Published
• Publication Date: 20-Apr-2009
• ICS: 49.030.30 - Nuts
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Apr-2009
• Due Date: 14-Jun-2009
• Completion Date: 21-Apr-2009
• Ref Project: EN 2680:2006 - Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 235 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OQHLuft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, beiderseitiger Flansch, aus legiertem Stahl, verkadmet, MoS2-geschmiert, metrische Reihe - Klasse: 900 MPa (bei Raumtemperatur) / 235 °CSérie aérospatiale - Écrous à river, à freinage interne, flottants, orientables, double patte, en acier allié, cadmiés, lubrifiés MoS2, série métrique - Classification: 900 MPa (à température ambiante) / 235 °CAerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated, metric series - Classification: 900 MPa (at ambient temperature) / 235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2680:2006SIST EN 2680:2009en,de01-junij-2009SIST EN 2680:2009SLOVENSKI
STANDARD



SIST EN 2680:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2680
May 2006 ICS 49.030.30 English Version
Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification: 900 MPa (at ambient temperature) / 235
°C
Série aérospatiale - Écrous à river, à freinage interne, flottants, orientables, double patte, en acier allié, cadmiés, lubrifiés MoS2, série métrique - Classification: 900 MPa (à température ambiante) / 235
°C
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, schwenkbar, beiderseitiger Flansch, aus legiertem Stahl, verkadmet, MoS2-geschmiert - Klasse: 900 MPa (bei Raumtemperatur) / 235
°C This European Standard was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2680:2006: ESIST EN 2680:2009



EN 2680:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.4 4 Designation.7 5 Marking.7 6 Technical specification.7
SIST EN 2680:2009



EN 2680:2006 (E) 3 Foreword This European Standard (EN 2680:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC
...