SIST EN ISO 15792-1:2008

Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000)

This part of ISO 15792 specifies the preparation of test piece and specimens. The purpose is to determine mechanical properties of all-weld metal where required by the consumable classification standard or for other purposes, in arc welding of steel, nickel and nickel alloys. This part of ISO 15792 is not applicable to single- or two-pass welding or fillet welding. For these cases, ISO 15792-2 and ISO 15792-3 apply.

Schweißzusätze - Prüfverfahren - Teil 1: Prüfverfahren für Prüfstücke zur Entnahme von Schweißgutproben an Stahl, Nickel und Nickellegierungen (ISO 15792-1:2000)

Dieser Teil von ISO 15792 legt die Herstellung des Prüfstücks und der Proben fest. Der Zweck ist die
Bestimmung der mechanischen Eigenschaften des reinen Schweißgutes, wenn sie durch Normen zur
Einteilung von Schweißzusätzen oder für andere Zwecke beim Lichtbogenschweißen von Stahl, Nickel und
Nickellegierungen gefordert werden.
Dieser Teil von ISO 15792 gilt nicht für Einlagen-, Lage/Gegenlage-Schweißungen oder Kehlnaht-Schweißungen.
Für diese Fälle gilt ISO 15792-2 und ISO 15792-3.

Produits consommables pour le soudage - Méthodes d'essai - Partie 1: Méthodes d'essai pour les éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et des alliages de nickel (ISO 15792-1:2000)

Dodajni materiali za varjenje - Preskusne metode - 1. del: Preskusne metode za čisti var na jeklu, niklju in nikljevih zlitinah (ISO 15792-1:2000)

Ta del standarda ISO 15792 opisuje pripravo preskušanca in vzorcev. Namen je določanje mehanske lastnosti čistega vara, kjer je to zahtevano s standardom za razvrščanje dodajnih materialov, ali za druge namene pri obločnem varjenju jekla, niklja in nikljevih zlitin. Ta del standarda ISO 15792 se ne uporablja za enopotezno, dvopotezno ali kotno varjenje. V teh primerih se uporabljata standarda ISO 15792-2 in ISO 15792-3.

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2008
• Withdrawal Date: 08-Oct-2020
• ICS: 25.160.20 - Welding consumables
• Technical Committee: VAR - Welding
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 29-Sep-2020
• Due Date: 22-Oct-2020
• Completion Date: 09-Oct-2020
• Ref Project: EN ISO 15792-1:2008 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000)

Relations

• Replaces: SIST EN 1597-1:1998 - Welding consumables - Test methods - Part 1: Test piece for all-weld metal test specimens in steel, nickel and nickel alloys
• Effective Date: 01-Sep-2008
• Amended By: SIST EN ISO 15792-1:2008/A1:2013 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011)
• Effective Date: 08-Jun-2022
• Amended By: SIST EN ISO 15792-1:2008/A1:2013 - Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000/Amd 1:2011)
• Effective Date: 01-Dec-2013
• Replaced By: SIST EN ISO 15792-1:2020 - Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys (ISO 15792-1:2020)
• Effective Date: 01-Nov-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15792-1:2008
01-september-2008
1DGRPHãþD
SIST EN 1597-1:1998
'RGDMQLPDWHULDOL]DYDUMHQMH3UHVNXVQHPHWRGHGHO3UHVNXVQHPHWRGH]D
þLVWLYDUQDMHNOXQLNOMXLQQLNOMHYLK]OLWLQDK,62
Welding consumables - Test methods - Part 1: Test methods for all-weld metal test
specimens in steel, nickel and nickel alloys (ISO 15792-1:2000)
Schweißzusätze - Prüfverfahren - Teil 1: Prüfverfahren für Prüfstücke zur Entnahme von
Schweißgutproben an Stahl, Nickel und Nickellegierungen (ISO 15792-1:2000)
Produits consommables pour le soudage - Méthodes d'essai - Partie 1: Méthodes d'essai
pour les éprouvettes de métal fondu hors dilution pour le soudage de l'acier, du nickel et
des alliages de nickel (ISO 15792-1:2000)
Ta slovenski standard je istoveten z: EN ISO 15792-1:2008
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 15792-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 15792-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 25.160.20 Supersedes EN 1597-1:1997
English Version
Welding consumables - Test methods - Part 1: Test methods for
all-weld metal test specimens in steel, nickel and nickel alloys
(ISO 15792-1:2000)
Produits consommables pour le soudage - Méthodes Schweißzusätze - Prüfverfahren - Teil 1: Prüfverfahren für
d'essai - Partie 1: Méthodes d'essai pour les éprouvettes Prüfstücke zur Entnahme von Schweißgutproben an Stahl,
de métal fondu hors dilution pour le soudage de l'acier, du Nickel und Nickellegierungen (ISO 15792-1:2000)
nickel et des alliages de nickel (ISO 15792-1:2000)
This European Standard was approved by CEN on 5 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15792-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 15792-1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 15792-1:2008 (E)
Foreword
The text of ISO 15792-1:2000 has been prepared by Technical Committee ISO/TC 44 “Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
15792-1:2008 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1597-1:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15792-1:2000 has been approved by CEN as a EN ISO 15792-1:2008 without any
modification.


3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 15792-1
First edition
2000-12-15
Welding consumables — Test methods —
Part 1:
Test methods for all-weld metal test
specimens in steel, nickel and nickel alloys
Produits consommables pour le soudage — Méthodes d'essai —
Partie 1: Méthodes d'essai pour les éprouvettes de métal fondu hors
dilution pour le soudage de l'acier, du nickel et des alliages de nickel
Reference number
ISO 15792-1:2000(E)
©
ISO 2000

---------------------- Page: 5 ----------------------

ISO 15792-1:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved

---------------------- Page: 6 ----------------------

ISO 15792-1:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 15792 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
Int
...