iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 474-5:2000

(Main)

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

This standard specifies additional requirements and/or exceptions from EN 474-1:1994 'Earth-moving machinery - Safety - Part 1: General requirements'.   This standard applies to wheel and crawler excavators defined in ISO/DIS 6165:1994, and gives additional requirements for attachments and for derivated machinery.   This standard applies for compact excavators as defined in 3.2.1 and figure C.2 and walking excavators as defined in 3.2.2 and figure C.5.   This standard deals with the significant hazards pertinent to hydraulic excavators when they are used as intended and under the conditions foreseen by the manufacturer (see Annex A of this standard and Annex C of EN 474-1:1994).  Bucket wheel excavators are not covered in this standard.

Erdbaumaschinen - Sicherheit - Teil 5: Anforderungen für Hydraulikbagger

Diese Norm legt zusätzliche Anforderungen und/oder Abweichungen von EN 474-1 "Erdbaumaschinen - Sicherheit - Allgemeine Anforderungen" fest. Diese Norm gilt für Mobil- und Raupenbagger, wie sie in ISO 6165 definiert sind, und beinhaltet zusätzliche Anforderungen für Arbeitsausrüstungen und für artverwandte Maschinen. Diese Norm gilt auch für Minibagger, wie sie in 3.2.1 und Anhang C, Bild C.2 und Schreitbagger, wie sie in 3.2.2 und Anhang C, Bild C.5, definiert sind.

Engins de terrassement - Sécurité - Partie 5: Exigences applicables aux pelles hydrauliques

La présente norme prescrit des exigences complémentaires et/ou des exceptions a l'EN 474-1 "Engins de terrassement - Sécurité - Exigences générales". La présente norme s'applique aux pelles hydrauliques sur roues et sur chenilles telles que définies dans l'ISO 6165, et fournit des exigences complémentaires pour les accessoires et pour les machines dérivées. La présente norme s'applique aussi aux mini-pelles telles que définies en 3.2.1 et dans l'annexe C, figure C.2, et aux pelles a avancement au pas telles que définies en 3.2.2 et dans l'annexe C, figure C.5.

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
10-Jun-2007
ICS
53.100 - Earth-moving machinery
Technical Committee
I13 - Imaginarni 13
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
11-Jun-2007
Due Date
04-Jul-2007
Completion Date
11-Jun-2007
Directive
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
Ref Project
EN 474-5:1996 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

Relations

Corrected By
SIST EN 474-5:2000/AC:2000 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators - Amendment AC
Effective Date
01-Apr-2000
Replaced By
SIST EN 474-5:2007 - Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Effective Date
01-May-2007

Buy Standard

EN 474-5:2000EN 474-5:2000
PreviousNext
Standard
EN 474-5:2000
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 474-5:2000
01-april-2000
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
Erdbaumaschinen - Sicherheit - Teil 5: Anforderungen für Hydraulikbagger
Engins de terrassement - Sécurité - Partie 5: Exigenc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 6165:2022(Main)
Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022)
EN ISO 6165:2022

This document provides vocabulary and an identification structure for classifying earth-moving
machinery designed to perform the following operations:
— excavation;
— loading;
— transportation;
— drilling, spreading, compacting or trenching of earth, rock and other materials, during work, for
example, on roads and dams, in quarries and mines and on building sites.
The purpose of this document is to provide a clear means to identify earth-moving machinery according
to its function and design configurations which can include additional classifications according to its
operating mass and control operator configuration.
Annex A provides a procedure based on the identification structure used by this document to classify
the machinery and introduce detailed identifications consistent with the logic implied by the structure.
Annex B provides a hierarchy of the operator control configurations for earth-moving machinery

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19014-2:2022(Main)
Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022)
EN ISO 19014-2:2022

This part of EN ISO 19014 specifies general principles for the development and testing of safety‐related parts of machine‐control systems (MCS) in earth‐moving machinery and its equipment, as defined in EN ISO 6165.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-3:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 3: Requirements for loaders
EN 474-3:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to loaders when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for loaders.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
This document does not provide performance requirements for safety related functions of control system(s).
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This part also deals with fork application, log handling application, single heavy object handling application and lifting operation application.
This document is not applicable to loaders which are manufactured before the date of publication of this document by CEN.
NOTE   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing, etc.) until harmonized requirements are available.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-5:2022/AC:2022(Corrigendum)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN 474-5:2022/AC:2022

This document together with EN 474 1:2022 deals with all significant hazards, hazardous situations and events relevant to hydraulic excavators when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) associated with the whole lifetime of the machine as described in EN ISO 12100:2010, 5.4.
The requirements of this document are complementary to the common requirements formulated in EN 474 1:2022. This document does not repeat the requirements of EN 474 1:2022 but supplements or modifies the requirements for hydraulic excavators.
This document does not provide requirements for main electrical circuits and drives of machinery when the primary source of energy is an external electrical supply.
The following significant and relevant hazards are not covered in this document:
—   Laser;
—   Lightning.
This document does not provide performance requirements for safety related functions of control system(s).
This document does not deal with towing of trailers.
This document does not deal with demolition machinery.
This document also deals with lifting operation application, shovel application, log application, grapple application, and magnetic plate application.
This document is not applicable to hydraulic excavators which are manufactured before the date of publication of this document by CEN.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-1:2022(Main)
Earth-moving machinery - Safety - Part 1: General requirements
EN 474-1:2022

This European Standard specifies the general safety requirements for earth-moving machinery, hereinafter also referred to as machines, described in EN ISO 6165:2012, except horizontal directional drill.
NOTE 1   Horizontal directional drills are covered by the EN 16228 series.
This European Standard gives the common safety requirements for earth-moving machinery families (see EN ISO 6165:2012, 3.4) and is intended to be used in conjunction with relevant parts of prEN 474 parts 2 to 13. These machine specific parts (prEN 474-2 to 13) do not repeat the requirements from prEN 474-1:2016, but add or replace the requirements for the family in question.
NOTE 2   The requirements specified in this part of the standard are common to two or more families of earth- moving machinery.
This part gives specific requirements for demolition machinery.
Specific requirements in prEN 474 parts 2 to 13 take precedence over the respective requirements of
prEN 474-1:2017.
For derivative machinery the parts of the standard that cover the specific functions and applications are applicable, e.g. a compact loader also used as a trencher the relevant requirements of prEN 474 parts 1, 3 and 10 are applicable.
The standard also covers general requirements for attachments intended to be used with earth-moving machinery families covered in the scope.
Except for part 12 this European Standard does not deal with the electrical hazards related to the main electrical circuits and drives of machinery when the primary source of energy is electrical.
This European Standard does not deal with towing of trailers.
This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking into account any reasonably foreseeable misuse thereof (see Clause 4). This European Standard specifies the appropriate technical measures to reduce risks arising from the significant hazards, hazardous situations and events during the whole foreseeable lifecycle of the machinery.
This European Standard is not applicable to earth-moving machinery, which are manufactured before the date of publication of this European Standard by CEN.
NOTE 3   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing etc.) until harmonised requirements are available.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    105 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-5:2022(Main)
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators
EN 474-5:2022

This document, together with part 1, deals with all significant hazards for earth-moving machinery - hydraulic excavators when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - hydraulic excavators.
This part also deals with derivated machinery and derivated use, e.g. lifting operation application, shovel application, log application, grapple application, magnetic plate application.
This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-3:2022(Main)
Earth-moving machinery - Safety - Part 3: Requirements for loaders
EN 474-3:2022

This document, together with part 1, deals with all significant hazards for earth-moving machinery - loaders when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - loaders.
This part also deals with fork application, single heavy object handling application, object handling application and log handling.
This European Standard is not applicable to hydraulic excavators manufactured before the date of publication of this European Standard by CEN.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-2:2022(Main)
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers
EN 474-2:2022

This European Standard specifies the general safety requirements for loaders, described in EN ISO 6165:2012.
This part also deals with fork application, single heavy object handling application, object handling application and log handling.
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1:2017.
This part does not repeat the requirements from prEN 474-1:2017, but adds or replace the requirements for application for loaders.
This European Standard deals with all significant hazards, hazardous situations and events relevant to earth-moving machinery, when used as intended and under conditions foreseen but also taking into account any reasonably foreseeable misuse thereof (see Clause 4). This European Standard specifies the appropriate technical measures to reduce risks arising from the significant hazards, hazardous situations and events during the whole foreseeable lifecycle of the machinery.
This European Standard is not applicable to earth-moving machinery, which are manufactured before the date of publication of this European Standard by CEN.
NOTE   For travelling on public roads, national traffic regulations apply (e.g. braking, steering, lighting, towing etc.) until harmonised requirements are available.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-11:2022(Main)
Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors
EN 474-11:2022

This document, together with part 1, deals with all significant hazards for earth-moving machinery - earth- and landfill compactors when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in
prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for earth moving machinery - earth- and landfill compactors.
Rammer compactors and vibratory plates are dealt with in EN 500-1 and EN 500-4.
This European Standard is not applicable to earth- and landfill compactors manufactured before the date of publication of this European Standard by CEN.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 474-10:2022(Main)
Earth-moving machinery - Safety - Part 10: Requirements for trenchers
EN 474-10:2022

This part of prEN 474 deals with all significant hazards, hazardous situations and events relevant to trenchers as defined in EN ISO 6165:2012 and trenchers with mechanized laying unit, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It deals with:
-   self-propelled integrated trencher;
-   combinations of a carrier-vehicle (truck, tractor, special vehicle) and a trenching attachment;
-   trenching interchangeable equipment fitted to a derivative machinery (e.g. compact loader) or a compact tool carrier).
-   For self-propelled integrated trencher, this part deals with all specific health and safety requirements.
-   For machinery which are a combination of a carrier-vehicle and a trenching attachment integrated to it (e.g. to a truck) or mounted on it (e.g. on a tractor), this part of prEN 474 deals with all specific health and safety requirements of the trenching attachment itself and of the interface (e.g. mechanical, electric, hydraulic, controls) between the carrier-vehicle and its attachment as well as the interaction and effects on each other when used together (e.g. stability, visibility).
NOTE   Carrier-vehicles are subject to other regulations (e.g. road regulations).
-   For derivative machinery, this part deals with specific health and safety requirements of the interchangeable equipment and the interface with derivative machinery or tool carrier.
-   For those machinery, this part doesn’t deal with the earth-moving machinery itself which can be subject to other standards (e.g. prEN 474-3 for a compact loader, prEN 474-4 for a backhoe loader).
This European Standard does not deal with continuous surface miners as defined in ISO/CD 19224, truck-trenchers that do not incorporate a vacuum extraction system and self-propelled ride-on and pedestrian controlled floor cutting-off machinery (e.g. ground saw) which are under the scope of EN 13862.
This document, together with part 1, deals with all significant hazards for earth-moving machinery - trenchers when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in prEN 474-1. This document does not repeat the requirements from prEN 474-1, but adds or replaces the requirements for application for trenchers.
This European Standard is not applicable to trenchers manufactured before the date of publication of this European Standard by CEN.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day