Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing

This European Standard applies to electrolytic dosing systems for conditioning water intended for human consumption inside buildings and based on dissolution of aluminium anodes (with imposed DC current). It specifies constructional (but not dimensional) and operational requirements. It describes relevant methods for testing performance and safety. It only concerns units which are permanently connected to the mains supply.

Anlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Elektrolytische Dosierungsanlagen mit Aluminiumanoden - Anforderungen an Ausführung und Sicherheit, Prüfung

Diese Europäische Norm gilt für elektrolytische Dosierungsanlagen zur Behandlung von Wasser für den menschlichen Gebrauch innerhalb von Gebäuden und hat das Inlösunggehen von Aluminiumanoden (bei aufgeprägtem Gleichstrom) zur Grundlage. In dieser Norm werden die Anforderungen im Hinblick auf die Bauausführung (jedoch nicht die Maße) und den Betrieb festgelegt. Sie beschreibt die relevanten Verfahren zur Prüfung von Eigenschaften und Sicherheit. Sie bezieht sich nur auf in die Trinkwasser-Installation fest eingebaute Anlagen.

Appareils de conditionnement d'eau a l'intérieur des bâtiments - Installations électrolytiques avec anodes en aluminium - Exigences de performances, de sécurité et d'essais

La présente norme européenne s'applique aux installations de traitement électrolytique utilisées pour le conditionnement de l'eau destinée a la consommation humaine a l'intérieur des bâtiments et dont le fonctionnement repose sur la dissolution des anodes en aluminium (par courant continu imposé). Elle spécifie les exigences en matiere de construction (mais pas les dimensions) et de fonctionnement. Elle décrit les méthodes appropriées permettant de procéder aux essais de performance et de sécurité. Elle concerne uniquement les appareils reliés en permanence au réseau.

Oprema za pripravo pitne vode v stavbah - Elektrolizno doziranje z aluminijevimi anodami - Zahteve za izvedbo, varnost in preskušanje

General Information

Status
Withdrawn
Publication Date
30-Apr-2004
Withdrawal Date
31-Aug-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
25-Aug-2020
Due Date
17-Sep-2020
Completion Date
01-Sep-2020

Buy Standard

Standard
EN 14095:2004
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za pripravo pitne vode v stavbah - Elektrolizno doziranje z aluminijevimi anodami - Zahteve za izvedbo, varnost in preskušanjeAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Elektrolytische Dosierungsanlagen mit Aluminiumanoden - Anforderungen an Ausführung und Sicherheit, PrüfungAppareils de conditionnement d'eau a l'intérieur des bâtiments - Installations électrolytiques avec anodes en aluminium - Exigences de performances, de sécurité et d'essaisWater conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 14095:2003SIST EN 14095:2004en01-maj-2004SIST EN 14095:2004SLOVENSKI
STANDARD



SIST EN 14095:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14095December 2003ICS 13.060.20; 91.140.60English versionWater conditioning equipment inside buildings - Electrolytictreatment systems with aluminium anodes - Requirements forperformance, safety and testingAppareils de conditionnement d'eau à l'intérieur desbâtiments - Installations électrolytiques avec anodes enaluminium - Exigences de performances, de sécurité etd'essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Elektrolytische Dosierungsanlagen mitAluminiumanoden - Anforderungen an Ausführung undSicherheit, PrüfungThis European Standard was approved by CEN on 14 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14095:2003 ESIST EN 14095:2004



EN 14095:2003 (E)2ContentsPageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.54Materials design and requirements.64.1Dosage of hydrated aluminium oxide.64.2Direct current generator.64.3Water meter.74.4Anodes.74.5Conditioning tank.75Performance requirements.85.1DC generator.85.2Terminals.86Performance testing.86.1Test bench.86.2Switchboard test.96.3DC generator test - procedures.96.4Terminals.107Technical documents and labelling.117.1Rating plate on the DC generator.117.2Owners booklet.117.3Anodes.117.4Label.11Annex A (informative).12A.1Operating conditions.12A.2Example of use.12A.3Aluminium composition.13A.4Water analysis.14A.5Electrolytic dissolution of aluminium.14A.6Maintenance.14A.7Operating and commissioning.15Bibliography.16SIST EN 14095:2004



EN 14095:2003 (E)3ForewordThis document (EN 14095:2003) has been prepared by Technical Committee CEN/TC 164 “Water supply”,the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2004, and conflicting national standards shall be withdrawn atthe latest by June 2004.Annex A is informative.This document includes a bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 14095:2004



EN 14095:2003 (E)4IntroductionIn respect to potential adverse effects of the quality of water intended for human consumption, caused by theproduct covered by this standard:a) this standard provides no information as to whether the product may be used without restriction in any ofthe member states of the EU or EFTA;b) it should be noted that, while awaiting the adoption of verifiable European criteria, existing regulationsconcerning the use and/or the characteristics of this product remain in force.SIST EN 14095:2004



EN 14095:2003 (E)51 ScopeThis European Standard applies to electrolytic dosing systems for conditioning water intended for humanconsumption inside buildings and based on dissolution of aluminium anodes (with imposed DC current). Itspecifies constructional (but not dimensional) and operational requirements. It describes relevant methods fortesting performance and safety. It only concerns units which are permanently connected to the mains supply.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies (including amendments).EN 573-3, Aluminium and aluminium alloys — Chemical composition and form of wrought products —Part 3: Chemical composition.EN 602, Aluminium and aluminium alloys — Wrought products — Chemical composition of semi products usedfor the fabrication of articles for use in contact with food.EN 1717, Protection against pollution of potable water in water installations and general requirements ofdevices to prevent pollution by backflow.EN 12499, Internal cathodic protection of metallic structuresprEN 12897, Water supply - Specification for indirectly heated unvented (closed) storage water heaters.EN 55011, Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbancecharacteristics - Limits and
methods of measurement (CISPR 11:1997,
modified)EN 60335-1, Household and similar electrical appliances - Safety - Part 1: General
requirements (IEC 60335-1:2001, modifiedISO 7858-1, Measurement of water flow in closed conduits -- Combination meters for cold potable water --Part 1: SpecificationsISO 7858-2, Measurement of water flow in closed conduits -- Combination meters for cold potable water --Part 2: Installation requirements3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply:3.1conditioning of water intended for human consumptionmodification of the characteristics of drinking water for a special purpose within the limits stipulated in theDirective 98/83/EEC, adopted in national legislation of the Member StatesSIST EN 14095:2004



EN 14095:2003 (E)63.2anodeelectrode connected to the positive (+) output from the direct current generator3.3anode lifetimetime interval between replacements of the aluminium anodes3.4cathodeelectrode connected to the negative (-) output from the direct current generator3.5direct current generatordevice which supplies low voltage direct current to the anodic dissolution of the aluminium anodes3.6hydrated aluminium oxidedosing agent first reaction product, which is formed by the dissolution of the aluminium anodes as a functionof the Direct Current with water3.7conditioning tankvessel in which the anodic dissolution of the aluminium anodes occurs. It is located in the main hot water lineafter re-heating, in front of the distribution network which is to be protected3.8conditioning timeresidence time of the conditioning tank. It is the volume of the conditioning tank divided by the cumulative flowrate of water4 Materials design and requirements4.1 Dosage of hydrated aluminium oxideThe reaction products of the aluminium anodes shall not give rise to concentrations beyond the limit inaccordance with the National and European regulations concerning the quality of water intended for humanconsumption (e.g. EC. Directive 98/83/EEC) (see 4.4).The maximum aluminium concentration (expressed as Al) shall not exceed 0,2 mg/l in cold water and 0,5 mg/Iin heated water (see 4.2).4.2 Direct current generatorThe electrical apparatus, connections and mountings on site shall be in accordance with EN 60335-1. TheDirect Current Generator with its connections to anodes, cathodes and other appliances shall be inaccordance with EN 55011.The DC output shall be controlled as a function of the water consumption.The current shall be limited to ensure that the amount of dissolved aluminium concentration does not exceedthe permitted value of the national regulations.There shall be visual indication of the operating status of the DC generator.The DC generator
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.