SIST EN ISO 8655-7:2022/A1:2025
(Amendment)Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume - Amendment 1 (ISO 8655-7:2022/Amd 1:2024)
Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume - Amendment 1 (ISO 8655-7:2022/Amd 1:2024)
Volumenmessgeräte mit Hubkolben - Teil 7: Alternative Prüfverfahren zur Bestimmung des Volumens - Änderung 1 (ISO 8655-7:2022/Amd 1:2024)
Appareils volumétriques à piston - Partie 7: Modes opératoires de mesure alternatifs pour la détermination de volumes - Amendement 1 (ISO 8655-7:2022/Amd 1:2024)
Volumetrične naprave, delujoče na bat - 7. del: Nadomestni merilni postopki za določanje prostornine - Dopolnilo A1 (ISO 8655-7:2022/Amd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Volumetrične naprave, delujoče na bat - 7. del: Nadomestni merilni postopki za
določanje prostornine - Dopolnilo A1 (ISO 8655-7:2022/Amd 1:2024)
Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for
the determination of volume - Amendment 1 (ISO 8655-7:2022/Amd 1:2024)
Volumenmessgeräte mit Hubkolben - Teil 7: Alternative Prüfverfahren zur Bestimmung
des Volumens - Änderung 1 (ISO 8655-7:2022/Amd 1:2024)
Appareils volumétriques à piston - Partie 7: Modes opératoires de mesure alternatifs
pour la détermination de volumes - Amendement 1 (ISO 8655-7:2022/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 8655-7:2022/A1:2024
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 8655-7:2022/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 17.060
English Version
Piston-operated volumetric apparatus - Part 7: Alternative
measurement procedures for the determination of volume
- Amendment 1 (ISO 8655-7:2022/Amd 1:2024)
Appareils volumétriques à piston - Partie 7: Modes Volumenmessgeräte mit Hubkolben - Teil 7:
opératoires de mesure alternatifs pour la Alternative Prüfverfahren zur Bestimmung des
détermination de volumes - Amendement 1 (ISO 8655- Volumens - Änderung 1 (ISO 8655-7:2022/Amd
7:2022/Amd 1:2024) 1:2024)
This amendment A1 modifies the European Standard EN ISO 8655-7:2022; it was approved by CEN on 17 December 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8655-7:2022/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 8655-7:2022/A1:2024) has been prepared by Technical Committee ISO/TC 48
"Laboratory equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory
equipment” the secretariat of which is held by DIN.
This Amendment to the European Standard EN ISO 8655-7:2022 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2025, and
conflicting national standards shall be withdrawn at the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.