iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60825-2:1999

(Main)

Safety of laser products -- Part 2: Safety of optical fibre communication systems

Safety of laser products -- Part 2: Safety of optical fibre communication systems

Provides requirements and specific guidance for the safe use of optical fibre and/or control communication systems where optical power may be accessible at great distance from the optical source. Does not apply to optical fibre systems primarily designed to transmit optical power for applications such as material processing or medical treatment.

Sicherheit von Lasereinrichtungen -- Teil 2: Sicherheit von Lichtwellenleiter-Kommunikationssystemen

Sécurité des appareils à laser -- Partie 2: Sécurité des systèmes de télécommunication par fibres optiques

Fournit des prescriptions et des lignes directrices spécifiques pour l'utilisation sans danger et/ou le contrôle des systèmes de télécommunication par fibres optiques lorsque la puissance optique peut être accessible à une distance éloignée de la source optique. Ne s'applique pas aux systèmes par fibres optiques conçus dans le principe pour transmettre de la puissance optique à des fins telles que le travail des matériaux ou le traitement médical. Les diodes électroluminescentes (DEL) sont sous-entendues à chaque utilisation du mot "laser".

Safety of laser products -- Part 2: Safety of optical fibre communication systems (IEC 60825-2:1993)

General Information

Status
Withdrawn
Publication Date
30-Jun-1999
Withdrawal Date
30-Nov-2001
ICS
31.260 - Optoelectronics. Laser equipment
33.180.01 - Fibre optic systems in general
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2001
Due Date
01-Dec-2001
Completion Date
01-Dec-2001
Directive
1999/5/EC - Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity
73/23/EEC - Electrical equipment designed for use within certain voltage limits
Ref Project
EN 60825-2:1994 - Safety of laser products - Part 2: Safety of optical fibre communication systems

Relations

Replaced By
SIST EN 60825-2:2001 - Safety of laser products -- Part 2: Safety of optical fibre communication systems
Effective Date
06-May-2014
Replaced By
SIST EN 60825-2:2001 - Safety of laser products -- Part 2: Safety of optical fibre communication systems
Effective Date
29-Jan-2023

Buy Standard

EN 60825-2:1999EN 60825-2:1999
PreviousNext
Standard
EN 60825-2:1999
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60825-2:1999
01-julij-1999
Safety of laser products -- Part 2: Safety of optical fibre communication systems
(IEC 60825-2:1993)
Safety of laser products -- Part 2: Safety of optical fibre communication systems
Sicherheit von Lasereinrichtungen -- Teil 2: Sicherheit von Lichtwellenleiter-
Kommunikationssystemen
Sécurité des appareils à laser -- Partie 2: Sécurité des systèmes de télécommunication
par fibres optiques
Ta slovenski standard je istoveten z: EN 60825-2:1994
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
33.180.01 6LVWHPL]RSWLþQLPLYODNQLQD Fibre optic systems in
VSORãQR general
SIST EN 60825-2:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60825-2:1999

---------------------- Page: 2 ----------------------

SIST EN 60825-2:1999

---------------------- Page: 3 ----------------------

SIST EN 60825-2:1999

---------------------- Page: 4 ----------------------

SIST EN 60825-2:1999

---------------------- Page: 5 ----------------------

SIST EN 60825-2:1999

---------------------- Page: 6 ---------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62007-1:2015/A1:2023(Amendment)
Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015/AMD1:2022)
EN 62007-1:2015/A1:2022
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60825-12:2019(Main)
Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information (IEC 60825-12:2019)
EN IEC 60825-12:2019

This part of EN 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under EN 60825-1 apply to those portions only. This standard does not apply to systems designed for purposes of transmitting optical power for applications such as material processing or medical treatment. This standard also does not apply to the use of systems in explosive atmospheres. The objective of this part of EN 60825 is to: - provide information to protect people from potentially hazardous optical radiation produced by free space optical communication systems (FSOCS) by specifying engineering controls and requirements, administrative controls and work practices according to the degree of the hazard; - specify requirements for manufacturing, installation, service and operating organisations in order to establish procedures and provide written information so that proper precautions can be adopted.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62007-1:2015(Main)
Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015)
EN 62007-1:2015

This part of IEC 62007 is a specification template for essential ratings and characteristics of
the following categories of semiconductor optoelectronic devices to be used in the field of
fibre optic systems and subsystems:
– semiconductor photoemitters;
– semiconductor photoelectric detectors;
– monolithic or hybrid integrated optoelectronic devices and their modules.
This part of IEC 62007 provides a frame for the preparation of detail specifications for the
essential ratings and characteristics.
In using this part of IEC 62007, detail specification writers add but do not delete specification
parameters and/or groups of specification parameters for particular applications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62007-2:2009(Main)
Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods (IEC 62007-2:2009)
EN 62007-2:2009

This part of IEC 62007 describes the measuring methods applicable to the semiconductor optoelectronic devices to be used in the field of fibre optic digital communication systems and subsystems. All optical fibres and cables that are defined in IEC 60793 series, IEC 60794 series are applicable. All optical connectors that are defined in IEC 60874 series are applicable, if a pigtail is to be terminated with an optical connector.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60825-2:2005/A1:2008(Amendment)
Safety of laser products -- Part 2: Safety of optical fibre communication systems (OFCS)
EN 60825-2:2004/A1:2007

Provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. The objective of this Part 2 of IEC 60825 is: to protect people from optical radiation resulting from OFCS; - provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted; - ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions.

  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60825-2:2005(Main)
Safety of laser products -- Part 2: Safety of optical fibre communication systems (OFCS)
EN 60825-2:2004

This part 2 of IEC 60825 provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This standard requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. The objective of this Part 2 of IEC 60825 is: to protect people from optical radiation resulting from OFCS; - provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted; - ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60825-12:2004(Main)
Safety of laser products -- Part 12: Safety of free space optical communication systems used for transmission of information
EN 60825-12:2004

This part of EN 60825 provides requirements and specific guidance for the manufacture and safe use of laser products and systems used for point-to-point or point-to-multipoint free space optical data transmission. This standard only addresses the open beam portion of the system. If portions of the equipment or system incorporate optical fibre that extends from the confinements of the enclosure(s), the manufacturing and safety requirements under EN 60825-1 apply to those portions only. This standard does not apply to systems designed for purposes of transmitting optical power for applications such as material processing or medical treatment. This standard also does not apply to the use of systems in explosive atmospheres. The objective of this part of EN 60825 is to: - provide information to protect people from potentially hazardous optical radiation produced by free space optical communication systems (FSOCS) by specifying engineering controls and requirements, administrative controls and work practices according to the degree of the hazard; - specify requirements for manufacturing, installation, service and operating organisations in order to establish procedures and provide written information so that proper precautions can be adopted.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN IEC 62522:2023(Main)
Calibration of tuneable laser sources
prEN IEC 62522:2023
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
kSIST FprEN IEC 60825-12:2022(Main)
Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
FprEN IEC 60825-12:2022

This document is applicable to products that emit laser radiation for the purpose of free space optical data transmission.
This document does not apply to laser products designed for the purposes of transmitting optical power for applications such as material processing or medical treatment. This document also does not apply to the use of laser products in explosive atmospheres (see IEC 60079-0). Light-emitting diodes employed by free space optical communication systems, used for the purpose of free space optical data transmission, do not fall into the scope of this document.
NOTE If the laser product incorporates an optical fibre that extends from the confinements of the enclosure, the requirements in IEC 60825-2 applies.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day