SIST EN ISO 9073-1:2023
(Main)Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023)
Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023)
Measurement of the area and mass of a test piece and calculation of its mass per unit area in grams per square metre. In order to meet the specific needs of nonwovens, alternative requirements to those listed in ISO 3801 are specified in this part of ISO 9073. These are: a) a different sampling procedure; b) an alternative specification for dimensions of test piece; c) a greater accuracy for the balance.
Vliesstoffe - Prüfverfahren - Teil 1: Bestimmung der flächenbezogenen Masse (ISO 9073-1:2023)
Dieses Dokument legt ein Verfahren zur Bestimmung der flächenbezogenen Masse von Vliesstoffen fest.
SICHERHEITSHINWEIS — Dieses Dokument erhebt nicht den Anspruch, eine vollständige Aufzählung von gegebenenfalls zutreffenden Sicherheitsproblemen zu beinhalten, die mit seiner Anwendung verbunden sind. Es liegt in der Verantwortung des Anwenders dieses Dokuments, geeignete Sicherheits- und Gesundheitsschutzmaßnahmen vorzusehen und im Vorfeld die Anwendbarkeit von einschränkenden Vorschriften zu klären. Es wird erwartet, dass die Person, die diese Prüfung durchführt, in allen Aspekten dieses Verfahrens umfassend geschult wurde.
Nontissés - Méthodes d'essai - Partie 1: Détermination de la masse surfacique (ISO 9073-1:2023)
La présente partie de l'ISO 9073 prescrit une méthode pour la détermination de la masse surfacique des nontissés.
Vlaknovine - Metode preskušanja - 1. del: Ugotavljanje ploščinske mase (ISO 9073-1:2023)
Meritve površine in mase preskušanca ter izračun njegove mase na površinsko enoto v gramih na kvadratni meter. V tem delu standarda ISO 9073 so določene zahteve za izpolnitev posebnih potreb vlakovin, ki so drugačne od zahtev, navedenih v standardu ISO 3801. Nanašajo se na a) drugačen postopek vzorčenja; b) drugo specifikacijo za dimenzije preskušanca; c) večjo natančnost za ravnovesje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9073-1:2023
01-september-2023
Vlaknovine - Metode preskušanja - 1. del: Ugotavljanje ploščinske mase (ISO 9073-
1:2023)
Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-
1:2023)
Vliesstoffe - Prüfverfahren - Teil 1: Bestimmung der flächenbezogenen Masse (ISO 9073
-1:2023)
Nontissés - Méthodes d'essai - Partie 1: Détermination de la masse surfacique (ISO
9073-1:2023)
Ta slovenski standard je istoveten z: EN ISO 9073-1:2023
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 9073-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9073-1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 9073-1:2023
EN ISO 9073-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN 29073-1:1992
English Version
Nowovens - Test methods - Part 1: Determination of mass
per unit area (ISO 9073-1:2023)
Nontissés - Méthodes d'essai - Partie 1: Détermination Vliesstoffe - Prüfverfahren - Teil 1: Bestimmung der
de la masse surfacique (ISO 9073-1:2023) flächenbezogenen Masse (ISO 9073-1:2023)
This European Standard was approved by CEN on 27 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9073-1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9073-1:2023
EN ISO 9073-1:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9073-1:2023
EN ISO 9073-1:2023 (E)
European foreword
This document (EN ISO 9073-1:2023) has been prepared by Technical Committee ISO/TC 38 "Textiles"
in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2023, and conflicting national standards
shall be withdrawn at the latest by December 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29073-1:1992.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 9073-1:2023 has been approved by CEN as EN ISO 9073-1:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9073-1:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 9073-1:2023
INTERNATIONAL ISO
STANDARD 9073-1
Second edition
2023-06
Nonwovens — Test methods —
Part 1:
Determ
...
SLOVENSKI STANDARD
oSIST prEN ISO 9073-1:2022
01-julij-2022
Vlaknovine - Metode preskušanja - 1. del: Ugotavljanje ploščinske mase (ISO/DIS
9073-1:2022)
Nowovens - Test methods - Part 1: Determination of mass per unit area (ISO/DIS 9073-
1:2022)
Vliesstoffe - Prüfverfahren - Teil 1: Bestimmung der flächenbezogenen Masse (ISO/DIS
9073‑1:2022)
Nontissés - Méthodes dessai - Partie 1: Détermination de la masse surfacique (ISO/DIS
9073-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 9073-1
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 9073-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 9073-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 9073-1:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9073-1
ISO/TC 38 Secretariat: SAC
Voting begins on: Voting terminates on:
2022-05-12 2022-08-04
Nonwovens — Test methods —
Part 1:
Determination of mass per unit area
Partie 1: Détermination de la masse surfacique
ICS: 59.080.30
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9073-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 9073-1:2022
ISO/DIS 9073-1:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 9073-1:2022
ISO/DIS 9073-1:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
5.1 Apparatus for cutting the test specimens, chosen from among the following: . 2
5.2 Balance, to accuracy of ± 0,1 % of the determined mass . 2
6 Sampling . 2
6.1 Preparation of specimen . . 3
7 Conditioning .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.