SIST EN 61076-7-001:2005

• Abstract:

  Gives a recommended layout of a detail specification and guidance for the information to be included.

• Status: Published
• Publication Date: 30-Nov-2005
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2005
• Due Date: 01-Dec-2005
• Completion Date: 01-Dec-2005
• Ref Project: EN 61076-7-001:2004 - Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

• Refers: SIST ISO 129:1995 - Technical drawings -- Dimensioning -- General principles, definitions, methods of execution and special indications
• Effective Date: 10-Feb-2026
• Refers: SIST EN 13531:2002 - Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
• Effective Date: 09-Feb-2026
• Refers: SIST EN 61076-1:2002 - Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications -- Part 1: Generic specification - Capability approval
• Effective Date: 03-Feb-2026
• Refers: SIST EN 61076-7:2001 - Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
• Effective Date: 03-Feb-2026

SIST EN 61076-7-001:2005 is the Slovene edition of EN 61076-7-001 for connectors for electronic equipment, published by SIST. It gives a blank detail specification for cable outlet accessories - a recommended layout and the information to include when preparing product-specific detail specifications. The document is intended for manufacturers, users, and approval or inspection bodies that need a common way to describe, compare, and check these accessories.

What does SIST EN 61076-7-001:2005 specify?

SIST EN 61076-7-001:2005 specifies how to prepare detail specifications for cable outlet accessories. It does not define a single product design; it sets the structure and the information that a detail specification should contain so different products can be described in a comparable way.

The document is organized into two main clauses:

• Clause 1 - Preparation of detail specifications
• Clause 2 - Contents of a detail specification

Annex ZA lists the normative references and their European equivalents.

Annex	What it covers
ZA	Normative references to international publications with their corresponding European publications

What are the key requirements of SIST EN 61076-7-001:2005?

SIST EN 61076-7-001:2005 tells the writer of a detail specification what to include and in what order. The practical aim is consistency: the same kind of cable outlet accessory should be described with the same kind of drawings, dimensions, characteristics, and ordering data.

How the title, drawings, and lettering are to be presented

Clause 1.1 says the title should clearly state the characteristic features of the cable outlet accessories covered. In practice, this helps a buyer or engineer tell similar detail specifications apart.

Clause 1.2 requires one projection method to be used throughout, either first angle or third angle, and all dimensions to be given in metric units. The drawings are meant to support selection, interchangeability, intermateability, and intermountability, not to serve as manufacturing drawings.

Clause 1.3 requires capital letters for main dimensions and allows small letters for other dimensions. This supports easier comparison between detail specifications and reduces confusion on drawings.

What information the detail specification shall contain

Clause 2 gives the required order of content. If a subclause does not apply to the accessory, the clause title and number are still kept, which makes different detail specifications easier to compare.

The detail specification should cover:

• Scope, including the cable outlet accessories covered and their characteristic features
• Type designation, based on the basic system from IEC 61076-7
• Common features and an isometric view
• Dimensions and mass
• Gauges, jigs and fixtures
• Characteristics
• Test schedule
• Quality assessment
• Capability assessment
• Ordering information

What the technical content has to describe

Clause 2.2 says the scope should identify features such as termination of shield, material or finish, and sealing. Clause 2.5 adds that the shape may differ from the drawing if the specified dimensions are not affected, and it asks for outline dimensions, mass, assembly tools, and intermateability information.

Clause 2.6 requires gauges to state dimensions, surface finish, tolerances, and wear, and it asks for suitable surface finish and hardness for critical parts. That matters because gauges must remain reliable in use.

Clause 2.7 groups characteristics into climatic, electrical, mechanical, and fluid resistance items. It names housing continuity and shielding effectiveness as electrical items, and bump severity, vibration severity, shock severity, mechanical endurance, and cable outlet size and entry as mechanical items.

How testing, assessment, and ordering are handled

Clause 2.8 points to Clause 4 of IEC 61076-7 for the test schedule. For a group of related accessories, the tests and requirements may be shown in one common set of tables.

Clause 2.9 and Clause 2.10 refer to quality assessment and capability assessment in IEC 61076-7. Clause 2.11 says ordering information should include the type designation and any marking details beyond those already required.

What terms does SIST EN 61076-7-001:2005 define?

SIST EN 61076-7-001:2005 uses several recurring technical terms that matter when preparing or reading a detail specification.

• Cable outlet accessories - Accessories for cable outlets covered by this part; the document provides the way to describe them in detail specifications.
• Detail specification - A product-specific document written to the standard layout in this part.
• Type designation - The identifying code for the accessory, based on the system in IEC 61076-7.
• Intermateability - The ability of related parts to mate correctly.
• Intermountability - The ability of related parts to be mounted interchangeably in the intended arrangement.
• Climatic category - The environmental category selected from the preferred categories in IEC 61076-7.
• Shielding effectiveness - The electrical characteristic used to describe how well the accessory supports shielding under specified conditions.
• Capability assessment - The assessment topic referenced to IEC 61076-7 for showing product capability.

Who uses SIST EN 61076-7-001:2005?

SIST EN 61076-7-001:2005 is used by manufacturers, users, and approving and inspection authorities. Manufacturers use it to prepare detail specifications and basis drawings for their designs. Users and buyers use it to compare products consistently before ordering. Approval and inspection bodies use it to check interchangeability, mounting, test information, and the declared characteristics of cable outlet accessories.

It is relevant in the connectors and electromechanical components field, especially where electronic equipment uses cable outlet accessories and documented quality or capability assessment is needed.

Which standards are used with SIST EN 61076-7-001:2005?

SIST EN 61076-7-001:2005 depends on these referenced standards:

• IEC 61076-1 - Gives the generic specification for connectors with assessed quality and capability approval.
• IEC 61076-7 - Provides the sectional specification for cable outlet accessories and supplies the related test, quality assessment, and capability assessment clauses.
• ISO 129 - Provides general principles for dimensioning on technical drawings.
• ISO 1101 - Provides rules and symbols for geometrical tolerancing on drawings.

Annex ZA links these international publications to the corresponding European publications.

What does the SIST EN 61076-7-001:2005 document contain?

SIST EN 61076-7-001:2005 contains guidance for writing a detail specification, then a standard list of content items that the specification should follow. It covers the title page, scope, type designation, common features, isometric view, dimensions and mass, gauges, characteristics, test schedule, quality assessment, capability assessment, and ordering information.

The document also describes the drawing practices to use in a detail specification, including projection method, metric units, dimensioning practice, and lettering. Where a group of related cable outlet accessories is covered, it allows common test tables and common presentation of shared features.

Annex ZA supplies the normative-reference mapping used for application in the European standard system.

SLOVENSKI SIST EN 61076-7-001:2005

STANDARD
december 2005
Konektorji za elektronsko opremo – 7-001. del: Pribor za kabelske izvode –
Okvirna podrobna specifikacija (IEC 61076-7-001:2004)
Connectors for electronic equipment – Part 7-001: Cable outlet accessories – Blank
detail specification (IEC 61076-7-001:2004)
ICS 31.220.10 Referenčna številka
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

EUROPEAN STANDARD EN 61076-7-001
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2004

ICS 31.220.10
English version
Connectors for electronic equipment
Part 7-001: Cable outlet accessories –
Blank detail specification
(IEC 61076-7-001:2004)
Connecteurs pour équipements Steckverbinder für elektronische
éléctroniques Einrichtungen
Partie 7-001: Accessoires de sorties Teil 7-001: Kabelausgangszubehör -
de câbles – Vordruck für Bauartspezifikation
Spécification particulière cadre (IEC 61076-7-001:2004)
(CEI 61076-7-001:2004)
This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61076-7-001:2004 E

Foreword
The text of document 48B/1448/FDIS, future edition 1 of IEC 61076-7-001, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-7-001 on 2004-09-01.
This European Standard is to be used in conjunction with EN 61076-7.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-7-001:2004 was approved by CENELEC as a
European Standard without any modification.
__________
- 3 - EN 61076-7-001:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2
)
IEC 61076-1 - Connectors with assessed quality, for use EN 61076-1 1995
in d.c., low frequency analogue and in
digital high-speed data applications
Part 1: Generic specification - Capability
approval
1) 2)
IEC 61076-7 - Part 7: Cable outlet accessories with EN 61076-7 2000
assessed quality, including qualification
and capability approval - Sectional
specification
1)
ISO 129 - Technical drawings - Dimensioning - - -
General principles, definitions, methods
of execution and special indications

1)
ISO 1101 - Technical drawings - Geometrical - -
tolerancing - Tolerancing of form,
orientation, location and run-out -
Generalities, definitions, symbols,
indications on drawings
1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE IEC
61076-7-001
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Connecteurs pour équipements électroniques –
Partie 7-001:
Accessoires de sorties de câbles –
Spécification particulière cadre
Connectors for electronic equipment –
Part 7-001:
Cable outlet accessories –
Blank detail specification
© IEC 2004 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
PRICE CODE H
Commission Electrotechnique Internationale
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61076-7-001 © IEC:2004 – 3 –
CONTENTS
FOREWORD.5
1 Preparation of detail specifications .9
1.1 Title of detail specification .9
1.2 Drawing information .9
1.2.1 Projection method and dimensioning system .9
1.2.2 Drawings and dimensions.9
1.3 System of lettering .11
1.4 Normative references .11
2 Contents of a detail specification .11
2.1 Title.13
2.2 Scope.13
2.3 Type designation.13
2.4 Common features and isometric view .13
2.5 Dimensions and mass .13
2.6 Gauges, jigs and fixtures.13
2.7 Characteristics .13
2.8 Test schedule.15
2.9 Quality assessment .15
2.10 Capability assessment.15
2.11 Ordering information.15

61076-7-001 © IEC:2004 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONNECTORS FOR ELECTRONIC EQUIPMENT –
Part 7-001: Cable outlet accessories –
Blank detail specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for in
...