EN 61076-7-001:2004

Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

Gives a recommended layout of a detail specification and guidance for the information to be included.

Steckverbinder für elektronische Einrichtungen - Teil 7-001: Kabelausgangszubehör - Vordruck für Bauartspezifikation

Connecteurs pour équipements éléctroniques - Partie 7-001: Accessoires de sorties de câbles - Spécification particulière cadre

Donne un modèle recommandé d'une spécification particulière et une orientation pour l'information à inclure.

Konektorji za elektronsko opremo – 7-001. del: Pribor za kabelske izvode – Okvirna podrobna specifikacija (IEC 61076-7-001:2004)

General Information

• Status: Published
• Publication Date: 22-Sep-2004
• Withdrawal Date: 31-Aug-2007
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: CLC/SR 48B - Connectors
• Drafting Committee: IEC/SC 48B - IEC_SC_48B
• Parallel Committee: IEC/SC 48B - IEC_SC_48B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 23-Sep-2004
• Completion Date: 23-Sep-2004
• Ref Project: SIST EN 61076-7-001:2005 - Connectors for electronic equipment -- Part 7-001: Cable outlet accessories - Blank detail specification

Standards Content (Sample)

SLOVENSKI SIST EN 61076-7-001:2005

STANDARD
december 2005
Konektorji za elektronsko opremo – 7-001. del: Pribor za kabelske izvode –
Okvirna podrobna specifikacija (IEC 61076-7-001:2004)
Connectors for electronic equipment – Part 7-001: Cable outlet accessories – Blank
detail specification (IEC 61076-7-001:2004)
ICS 31.220.10 Referenčna številka
SIST EN 61076-7-001:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 61076-7-001
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2004

ICS 31.220.10


English version


Connectors for electronic equipment
Part 7-001: Cable outlet accessories –
Blank detail specification
(IEC 61076-7-001:2004)


Connecteurs pour équipements Steckverbinder für elektronische
éléctroniques Einrichtungen
Partie 7-001: Accessoires de sorties Teil 7-001: Kabelausgangszubehör -
de câbles – Vordruck für Bauartspezifikation
Spécification particulière cadre (IEC 61076-7-001:2004)
(CEI 61076-7-001:2004)






This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 61076-7-001:2004 E

---------------------- Page: 2 ----------------------

EN 61076-7-001:2004 - 2 -
Foreword
The text of document 48B/1448/FDIS, future edition 1 of IEC 61076-7-001, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61076-7-001 on 2004-09-01.
This European Standard is to be used in conjunction with EN 61076-7.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61076-7-001:2004 was approved by CENELEC as a
European Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61076-7-001:2004
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1) 2
)
IEC 61076-1 - Connectors with assessed quality, for use EN 61076-1 1995
in d.c., low frequency analogue and in
digital high-speed data applications
Part 1: Generic specification - Capability
approval

1) 2)
IEC 61076-7 - Part 7: Cable outlet accessories with EN 61076-7 2000
assessed quality, including qualification
and capability approval - Sectional
specification

1)
ISO 129 - Technical drawings - Dimensioning - - -
General principles, definitions, methods
of execution and special indications

1)
ISO 1101 - Technical drawings - Geometrical - -
tolerancing - Tolerancing of form,
orientation, location and run-out -
Generalities, definitions, symbols,
indications on drawings





...