Unshaped refractory products - Part 3: Characterization as received

This standard specifies the methods for the characterization of unshaped refractory materials as received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense and insulating), gunning materials and mouldables, as defined in ENV 1402-1. Note: A check list of appropriate tests is given in annex A.

Ungeformte feuerfeste Erzeugnisse - Teil 3: Prüfung im Anlieferungszustand

Dieser Teil dieser Europäischen Norm legt die Verfahren für die Prüfung ungeformter feuerfester Erzeugnisse im Anlieferungszustand und für die Prüfungen der Gleichmäßigkeit von Lieferungen eines Erzeugnisses fest. Er ist anwendbar für die in EN 1402-1 festgelegten Feuerbetone (dichte Feuerbetone und wärmedämmende Feuerbetone), feuerfesten Spritzmassen und formbare Massen.
ANMERKUNG   Eine Übersicht geeigneter Prüfungen ist im Anhang A aufgeführt.

Produits réfractaires non façonnés - Partie 3: Caractérisation a l'état de réception

La présente partie de cette Norme européenne spécifie les méthodes pour la caractérisation des matériaux réfractaires non façonnés dans l'état de réception et pour le contrôle de l'homogénéité d'une livraison de produits. Elle s'applique aux bétons (denses et isolants), aux matériaux projetables et aux matériaux moulables, tels que définis dans le prEN 1402-1.
NOTE   La liste des essais appropriés est donnée dans l'annexe A.

Neoblikovani ognjevzdržni izdelki - 3. del: Pripravljeni neoblikovani izdelki

General Information

Status
Withdrawn
Publication Date
30-Apr-2004
Withdrawal Date
11-Nov-2013
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Nov-2013
Due Date
05-Dec-2013
Completion Date
12-Nov-2013

Relations

Buy Standard

Standard
EN 1402-3:2004
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Neoblikovani ognjevzdržni izdelki - 3. del: Pripravljeni neoblikovani izdelkiUngeformte feuerfeste Erzeugnisse - Teil 3: Prüfung im AnlieferungszustandProduits réfractaires non façonnés - Partie 3: Caractérisation a l'état de réceptionUnshaped refractory products - Part 3: Characterization as received81.080Ognjevzdržni materialiRefractoriesICS:Ta slovenski standard je istoveten z:EN 1402-3:2003SIST EN 1402-3:2004en01-maj-2004SIST EN 1402-3:2004SLOVENSKI
STANDARDSIST ENV 1402-3:20001DGRPHãþD



SIST EN 1402-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1402-3October 2003ICS 81.080Supersedes ENV 1402-3:1998English versionUnshaped refractory products - Part 3: Characterization asreceivedProduits réfractaires non façonnés - Partie 3:Caractérisation à l'état de réceptionUngeformte feuerfeste Erzeugnisse - Teil 3: Prüfung imAnlieferungszustandThis European Standard was approved by CEN on 20 June 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1402-3:2003 ESIST EN 1402-3:2004



EN 1402-3:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Sampling.55Determination of chemical composition.55.1Preparation of test sample.55.2Alumina-silica products.55.3Basic products.55.4Special products.55.5Carbon-containing products.56Determination of grain size distribution.56.1Principle.56.2Apparatus.66.2.1Balance,.66.2.2Sieves,.66.2.3Sieving apparatus.66.2.4Drying oven,.66.2.5Soxhlet apparatus.66.2.6Electric hot plate or heating mantle.66.3Quantity of sample.66.4Preparation of test samples.66.5Procedure.66.5.1Drying and measurement of dry sample mass.66.5.2Sieving.76.6Expression of results.87Determination of moisture content.87.1Preparation of test sample.87.2Quantity of sample.87.3Procedure.97.4Calculation.98Determination of workability index.98.1General.98.2Apparatus.98.2.1Sandrammer.98.2.2Measuring device.128.3Preparation of test-pieces.128.4Procedure and calculation.129Test report.12Annex A (informative)
Summary of tests.14SIST EN 1402-3:2004



EN 1402-3:2003 (E)3ForewordThis document (EN 1402-3:2003) has been prepared by Technical Committee CEN/TC 187 "Refractory productsand materials", the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by April 2004 and conflicting national standards shall be withdrawn at the latest byApril 2004.This document supersedes ENV 1402-3:1998.EN 1402 “Unshaped refractory products“ consists of eight parts:¾ Part 1: Introduction and classification¾ Part 2: Sampling for testing¾ Part 3: Characterization as received¾ Part 4: Consistency testing¾ Part 5: Preparation and treatment of test pieces¾ Part 6: Measurement of physical properties¾ Part 7: Tests on pre-formed shapes¾ Part 8: Determination of complementary propertiesAnnex A is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 1402-3:2004



EN 1402-3:2003 (E)41 Scope This part of this European Standard specifies the methods for the characterization of unshaped refractory materialsas received and for checking the homogeneity of a delivery of a product. It is applicable to castables (dense andinsulating), gunning materials and ramming materials, as defined in EN 1402-1.NOTEA check list of appropriate tests is given in annex A.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 955-2, Chemical analysis of refractory products - Part 2 Products containing silica and/or alumina (wet method).prEN 955-3, Chemical analysis of refractory products - Part 3: Chrome-bearing materials (wet methods).ENV 955-4, Chemical analysis of refractory products - Part 4: Products containing silica and/or alumina [Analysisby Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic EmissionSpectrography (ICP)].EN 993-3, Methods of test for dense shaped refractory products - Part 3 Tests methods for carbon-containingrefractories.EN 1402-1, Unshaped refractory products - Part 1: Introduction and classification.EN 1402-2, Unshaped refractory products - Part 2: Sampling for testing.EN ISO 10058, Magnesites and dolomites - Chemical analysis (ISO 10058:1992).EN ISO 12677, Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003).ISO 565, Test sieves - Metal wire cloth, perforated metal plate and electroformed sheet - Nominal sizes ofopenings.3 PrincipleUnshaped refractory products are characterized by making the following determinations:a) chemical composition;b) grain size distribution by means of sieve analysis;c) moisture content of ramming materials;d) workability index of wet ramming materials.It is not necessary to carry out all of these determinations to characterize a material.SIST EN 1402-3:2004



EN 1402-3:2003 (E)54 SamplingTake samples in accordance with the guidance given in EN 1402-2 and prepare the quantities required by eachindividual determination.5 Determination of chemical composition5.1 Preparation of test sampleFor ramming materials supplied wet, dry the samples (see clause 4) in accordance with 6.5.1. For all samples,reduce the amount by coning and quartering and grind to the particle size required for chemical analysis.NOTEThe methods of chemical analysis used include the determination of loss on ignition.5.2 Alumina-silica productsDetermine the chemical composition either in accordance with EN 955-2 (wet methods), EN ISO 12677 (X-rayfluorescence (XRF) analysis) or ENV 955-4 (Analysis by Flame Atomic Absorption Spectrometry (FAAS) andInductively Coupled Plasma Emission Spectrometry (ICP)).NOTEFor products containing chrome, prEN 955-3 can be used in place of EN 955-2.Report the method used.5.3 Basic productsDetermine the chemical composition in accordance with EN ISO 10058 (wet methods), prEN 955-3 for productscontaining chrome or EN ISO 12677 (XRF analysis).Report the method used.5.4 Special productsAs no standard is currently available for the determination of materials other than the alumina-silica or basic series,the chemical composition shall be determined according to me
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.