oSIST prEN 13630-3:2021

Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords

This European Standard describes a method of determining the sensitiveness to friction of the core of fexible plastics-coated detonating cords, and flexible fibrous-overbraided detonating cords for civil uses.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 3: Bestimmung der Reibempfindlichkeit der Seele von Sprengschnüren

Dieses Dokument legt ein Verfahren für die Beurteilung der Reibempfindlichkeit der Seele von Sprengschnüren fest.
Die Anwendbarkeit des Prüfverfahrens ist unter Umgebungsbedingungen im Labor gegeben. Die Prüfung bei einer bestimmten Temperatur außerhalb der Umgebungsbedingungen kann besondere Vorkehrungen hinsichtlich der Vorbereitung des Prüfstücks und/oder der Prüfausrüstung erfordern.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 3: Détermination de la sensibilité au frottement de l'âme des cordeaux détonants

Le présent document spécifie une méthode d'évaluation de la sensibilité au frottement de l'âme des cordeaux détonants.
La méthode d'essai est applicable en conditions ambiantes de laboratoire. Les essais à des températures spécifiques autres que la température ambiante peuvent nécessiter des dispositions particulières pour conditionner les échantillons et/ou le matériel d'essai.

Eksplozivi za civilno uporabo - Detonacijske in počasi goreče vžigalne vrvice - 3. del: Ugotavljanje občutljivosti jedra detonacijskih vrvic na trenje

General Information

• Status: Not Published
• Public Enquiry End Date: 02-May-2021
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 03-Mar-2021
• Due Date: 21-Jul-2021
• Completion Date: 07-May-2021
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: prEN 13630-3 - Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords

Relations

• Revised: SIST EN 13630-3:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords
• Effective Date: 01-Apr-2021
• Revised: SIST EN 13630-3:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords
• Effective Date: 18-Jan-2023
• Revised: SIST EN 13630-3:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of sensitiveness to friction of the core of detonating cords
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13630-3:2021
01-april-2021
Eksplozivi za civilno uporabo - Detonacijske in počasi goreče vžigalne vrvice - 3.
del: Ugotavljanje občutljivosti jedra detonacijskih vrvic na trenje
Explosives for civil uses - Detonating cords and safety fuses - Part 3: Determination of
sensitiveness to friction of the core of detonating cords
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 3:
Bestimmung der Reibempfindlichkeit der Seele von Sprengschnüren
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 3:
Détermination de la sensibilité au frottement de l'âme des cordeaux détonants
Ta slovenski standard je istoveten z: prEN 13630-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13630-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13630-3:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13630-3:2021


DRAFT
EUROPEAN STANDARD
prEN 13630-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13630-3:2002
English Version

Explosives for civil uses - Detonating cords and safety
fuses - Part 3: Determination of sensitiveness to friction of
the core of detonating cords
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partie 3 : Détermination de la sensibilité au Sicherheitsanzündschnüre - Teil 3: Bestimmung der
frottement de l'âme des cordeaux détonants Reibempfindlichkeit der Seele von Sprengschnüren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13630-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13630-3:2021
prEN 13630-3:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation of test samples . 4
7 Procedure . 4
8 Test report . 5
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2014/28/EU relating to the making available on the
market and supervision of explosives for civil uses aimed to be covered . 6
Bibliography . 7

2

---------------------- Page: 4 ----------------------
oSIST prEN 13630-3:2021
prEN 13630-3:2021 (E)
European foreword
This document (prEN 13630-3:2021) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13630-3:2002.
In comparison with the previous edition, the following technical modifications have been made:
a) the normative references were updated;
b) Clause 4, Principle, has been added;
c) Annex A, Range of applicability of the test method, has been removed and the content has been revised
and moved to Clause 1, Scope;
d) Annex ZA has been updated.
This document has been prepared under a Standardization Request (M/562) annexed to the Com
...