iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60952-3:1997

(Main)

Aircraft batteries -- Part 3: External electrical connectors

Aircraft batteries -- Part 3: External electrical connectors

Defines the design and dimensions of the external electrical connectors on aircraft batteries which interface with the connecor plugs on the aircraft.

Flugzeug-Batterien -- Teil 3: Äußere elektrische Anschlüsse

Batteries d'aéronefs -- Partie 3: Connecteurs électriques externes

Définit la conception et les dimensions des connecteurs électriques externes des batteries d'aéronefs. Ces connecteurs constituent l'interface avec celui de l'aéronef.

Aircraft batteries - Part 3: External electrical connectors

General Information

Status
Withdrawn
Publication Date
31-Jan-1997
Withdrawal Date
26-Mar-2009
ICS
29.220.20 - Acid secondary cells and batteries
49.060 - Aerospace electric equipment and systems
Technical Committee
ISCB - Secondary cells and batteries
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Mar-2009
Due Date
01-Apr-2009
Completion Date
27-Mar-2009
Ref Project
EN 60952-3:1995 - Aircraft batteries - Part 3: External electrical connectors

Relations

Replaced By
SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
Effective Date
06-May-2014
Replaced By
SIST EN 60952-3:2005 - Aircraft batteries -- Part 3: Product specification and declaration of design and performance (DDP)
Effective Date
29-Jan-2023

Buy Standard

EN 60952-3:1997EN 60952-3:1997
PreviousNext
Standard
EN 60952-3:1997
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60952-3:1997
01-februar-1997
Aircraft batteries - Part 3: External electrical connectors
Aircraft batteries -- Part 3: External electrical connectors
Flugzeug-Batterien -- Teil 3: Äußere elektrische Anschlüsse
Batteries d'aéronefs -- Partie 3: Connecteurs électriques externes
Ta slovenski standard je istoveten z: EN 60952-3:1995
ICS:
29.220.20 .LVOLQVNLVHNXQGDUQLþOHQLLQ Acid secondary cells and
EDWHULMH batteries
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 60952-3:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60952-3:1997

---------------------- Page: 2 ---------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 60952-1:2014(Main)
Aircraft batteries - Part 1: General test requirements and performance levels
EN 60952-1:2013

This part of the IEC 60952 series defines test procedures for the evaluation, comparison and qualification of batteries and states minimum performance and environmental levels for airworthiness. Where specific tests are defined with no pass/fail requirement (to establish performance capability), the manufacturer’s declared values, from qualification testing, will be used to establish minimum requirements for ongoing maintenance of approval for that design of battery. To provide representative examples, this standard utilises voltage and current values based upon an aircraft electrical system nominally rated at 28 V d.c. Additionally, the nominal values for cell voltage are assumed to be 1,2 V per cell for nickel-cadmium batteries and 2,0 V per cell for lead-acid batteries. The specific topics addressed in this part of IEC 60952 serve to establish acceptable quality standards required to qualify a battery as airworthy. In cases where the requirements for a specific application exceed those detailed in this standard, the purchaser will detail said requirements in the product specification and the method of establishing compliance. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60952-2:2014(Main)
Aircraft batteries - Part 2: Design and construction requirements
EN 60952-2:2013

This part of IEC 60952 series defines the physical design, construction and material requirements for nickel-cadmium and lead-acid aircraft batteries containing vented or valveregulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications. The specific topics addressed in this part serve to establish acceptable quality standards required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013. A preferred range of aircraft batteries is specified in Annex A, but this part of IEC 60952 series may be used for other battery sizes, arrangements and ratings. For particular applications, other design requirements may be stipulated. These will be in addition to the requirements of this part and will be covered by specific documents. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE, etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60952-3:2014(Main)
Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)
EN 60952-3:2013

This part of IEC 60952 defines requirements for the product specification as well as procedures for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft batteries containing vented or valve-regulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications. The specific topics addressed in this part serve to establish acceptable quality standards required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013. The design construction and test requirements should conform to the requirements specified in IEC 60952-1 and IEC 60952-2. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60952-1:2014(Main)
Aircraft batteries - Part 1: General test requirements and performance levels
EN 60952-1:2013

This part of the IEC 60952 series defines test procedures for the evaluation, comparison and qualification of batteries and states minimum performance and environmental levels for airworthiness. Where specific tests are defined with no pass/fail requirement (to establish performance capability), the manufacturer’s declared values, from qualification testing, will be used to establish minimum requirements for ongoing maintenance of approval for that design of battery. To provide representative examples, this standard utilises voltage and current values based upon an aircraft electrical system nominally rated at 28 V d.c. Additionally, the nominal values for cell voltage are assumed to be 1,2 V per cell for nickel-cadmium batteries and 2,0 V per cell for lead-acid batteries. The specific topics addressed in this part of IEC 60952 serve to establish acceptable quality standards required to qualify a battery as airworthy. In cases where the requirements for a specific application exceed those detailed in this standard, the purchaser will detail said requirements in the product specification and the method of establishing compliance. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60952-2:2014(Main)
Aircraft batteries - Part 2: Design and construction requirements
EN 60952-2:2013

This part of IEC 60952 series defines the physical design, construction and material requirements for nickel-cadmium and lead-acid aircraft batteries containing vented or valveregulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications. The specific topics addressed in this part serve to establish acceptable quality standards required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013. A preferred range of aircraft batteries is specified in Annex A, but this part of IEC 60952 series may be used for other battery sizes, arrangements and ratings. For particular applications, other design requirements may be stipulated. These will be in addition to the requirements of this part and will be covered by specific documents. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE, etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60952-3:2014(Main)
Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP)
EN 60952-3:2013

This part of IEC 60952 defines requirements for the product specification as well as procedures for a Declaration of Design and Performance (DDP) for nickel-cadmium and lead-acid aircraft batteries containing vented or valve-regulated cells or monoblocs. The batteries are used for both general purposes and specific aerospace applications. The specific topics addressed in this part serve to establish acceptable quality standards required to qualify a battery as airworthy as defined in Clause 3 of IEC 60952-1:2013. The design construction and test requirements should conform to the requirements specified in IEC 60952-1 and IEC 60952-2. It is recognised that additional data may be required by other organisations (national standards bodies, AECMA, SAE etc.). The present standard can be used as a framework to devise tests for generation of the required data.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-4:2023(Main)
Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)
EN ISO 3262-4:2023

This document specifies requirements and corresponding methods of test for whiting.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1247-1:2023(Main)
Aluminium pigments for paints - Part 1: General aluminium pigments (ISO 1247-1:2021)
EN ISO 1247-1:2023

This document specifies the requirements and corresponding test methods for aluminium pigments suitable for use in paints including:
a) general, decorative and protective paints, and
b) special finishing paints.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day