Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification

This European Standard specifies requirements for two types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying liquefied petroleum gas and liquefied natural gas. It specifies sizes from 25 mm to 250 mm, working pressures from 10,5 bar to 20 bar and operating temperatures from -200°C to +45°C.

Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Flüssiggas und verflüssigtem Erdgas - Spezifikation

Diese Europäische Norm legt Anforderungen fest für zwei Typen thermoplastischer, mehrlagiger (nicht vulkanisierte) Schläuche und Schlauchleitungen zur Förderung von Flüssiggas (LPG) und verflüssigtem Erdgas.
Sie legt Größen fest von 25 mm bis 250 mm, Betriebsdrücke von 10,5 bar  ) bis 20 bar und Betriebstemperaturen von -200 °C bis +45 °C.

Tuyaux et flexibles en thermoplastique multicouches (non vulcanisés) utilisés pour le dépotage de gaz pétrolier liquide et de gaz naturel liquéfié - Spécification

La présente Norme européenne spécifie des exigences pour deux types de tuyaux et flexibles en thermoplastique multicouches (non vulcanisés) utilisés pour le dépotage de gaz pétrolier liquide et de gaz naturel liquéfié. Chaque type est divisé en deux classe, une pour les exigences à quai et une pour celles au large.
Elle spécifie des dimensions comprises entre 25 mm et 250 mm, des pressions de service comprises entre 10,5 bar ) et 20 bar et des températures d'utilisation comprises entre - 175 °C et + 45 °C.

Plastomerne večslojne (ne-vulkanizirane) cevi in cevni priključki za pretok utekočinjenega naftnega plina in utekočinjenega zemeljskega plina - Specifikacija

General Information

Status
Withdrawn
Publication Date
30-Jun-2003
Withdrawal Date
03-Oct-2011
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
03-Oct-2011
Due Date
26-Oct-2011
Completion Date
04-Oct-2011

Relations

Buy Standard

Standard
EN 13766:2003
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Flüssiggas und verflüssigtem Erdgas - SpezifikationTuyaux et flexibles en thermoplastique multicouches (non vulcanisés) utilisés pour le dépotage de gaz pétrolier liquide et de gaz naturel liquéfié - SpécificationThermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification83.140.30Cevi, fitingi in ventili iz polimernih materialovPlastics pipes, fittings and valves75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 13766:2003SIST EN 13766:2003en01-julij-2003SIST EN 13766:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13766February 2003ICS 23.040.70English versionThermoplastic multi-layer (non-vulcanized) hoses and hoseassemblies for the transfer of liquid petroleum gas and liquefiednatural gas - SpecificationTuyaux et flexibles en thermoplastique multicouches (nonvulcanisés) utilisés pour le dépotage de gaz pétrolier liquideet de gaz naturel liquéfié - SpécificationThermoplastische, mehrlagige (nicht vulkanisierte)Schläuche und Schlauchleitungen für die Förderung vonFlüssiggas und verflüssigtem Erdgas - SpezifikationThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13766:2003 ESIST EN 13766:2003

Crush recovery test.11Annex B (normative)
Method of test for thermal ageing.13Annex C (normative)
Method of test of fittings subjected to low temperatures.14C.1General.14C.2Specimen size.14Annex D (normative)
Sequence of hydrostatic tests.15Annex E (normative)
Method of test for fitting security.16Annex F (normative)
Method of test for leak tightness.17Annex G (normative)
Type approval and routine tests for hoses and hose assemblies.18Annex H (informative)
Batch tests for hoses and hose assemblies.19SIST EN 13766:2003

1 1 bar = 0,1 MPa.SIST EN 13766:2003

Table 1 — Pressure and temperature rangePressure/temperatureClass Aa
Class Bb Class AClass BType 1Type 1Type 2Type 2Maximum working pressure (bar)25201310,5Proof pressure (bar)37,53019,515,8Minimum burst pressure (bar)1001005252,5Working temperature range (°C)-50 ± 3 to + 45-50 ± 3 to + 45-175 ± 5 to + 45-175 ± 5 to + 45aClass A is for use onshore.bClass B is for use offshore.5 Materials and constructionHoses shall be constructed as shown in Figure 1 and shall consist of the following:Class A:- an internal wire helix of stainless steel conforming to EN 10088-1, numbers 1.4306, 1.4401, 1.4404 or 1.4436;- a multi-ply wall of
layers of films and
fabrics made of thermoplastics that in combination give the requiredproperties and provide a complete seal;- an external wire helix of stainless steel conforming to EN 10088-1, numbers 1.4306, 1.4401, 1.4404 or 1.4436.Class B:- an internal wire helix of stainless steel conforming to EN 10088-1, numbers 1.4401, 1.4404 or 1.4436;- a multi-ply wall of
layers of films and
fabrics made of thermoplastics that in combination give the requiredproperties and provide a complete seal;- an external wire helix of stainless steel conforming to EN 10088-1, numbers 1.4401, 1.4404 or 1.4436.NOTEBy agreement between manufacturer and purchaser, the outer layer may have colour identification.SIST EN 13766:2003

—No leakage at proof pressure given inTable 1Annex BLow temperatureflexibility
---Test at minimum temperature given inTable 1EN ISO 4672SIST EN 13766:2003
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.