SIST EN 60730-2-9:2002/A1:2004
(Amendment)Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls
Automatic electrical controls for household and similar use -- Part 2-9: Particular requirements for temperature sensing controls
D114/024: same dow as EN
Automatische elektrische Regel- und Steuergeräte für den Hausgebrauch und ähnliche Anwendungen -- Teil 2-9: Besondere Anforderungen an temperaturabhängige Regel- und Steuergeräte
Dispositifs de commande électrique automatiques à usage domestique et analogue -- Partie 2-9: Règles particulières pour les dispositifs de commande thermosensibles
Amendment to clauses 2, 6, 7, 14, 16 & 17 and annexes H & AA of EN
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60730-2-
9:2002/A1:2004
STANDARD
marec 2004
Amendment to clauses 2, 6, 7, 14, 16 & 17 and annexes H & AA of EN
ICS 5HIHUHQþQDãWHYLOND
97.120
SIST EN 60730-2-9:2002/A1:2004(en)
! "#$%!&!%’()*#+’
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60730-2-9/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2003
ICS 97.120
English version
Automatic electrical controls for household and similar use
Part 2-9: Particular requirements for temperature sensing controls
(IEC 60730-2-9:2000/A1:2002, modified)
Dispositifs de commande électrique Automatische elektrische Regel- und
automatiques à usage domestique Steuergeräte für den Hausgebrauch
et analogue und ähnliche Anwendungen
Partie 2-9: Règles particulières pour les Teil 2-9: Besondere Anforderungen
dispositifs de commande thermosensibles an temperaturabhängige Regel- und
(CEI 60730-2-9:2000/A1:2002, modifiée) Steuergeräte
(IEC 60730-2-9:2000/A1:2002, modifiziert)
This amendment A1 modifies the European Standard EN 60730-2-9:2002; it was approved by CENELEC
on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60730-2-9:2002/A1:2003 E
---------------------- Page: 2 ----------------------
EN 60730-2-9:2002/A1:2003 – 2 –
Foreword
The text of amendment 1:2002 to the International Standard IEC 60730-2-9:2000, prepared by
IEC TC 72, Automatic controls for household use, together with the common modifications prepared by
the Technical Committee CENELEC TC 72, Automatic controls for household use, was submitted to the
formal vote and was approved by CENELEC as amendment A1 to EN 60730-2-9:2002 on 2003-04-01.
The following dates were fixed:
- latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2004-04-01
- latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-12-01
This document supplements or modifies the corresponding clauses of amendment 1:2002 to
IEC 60730-2-9:2000 so as to convert it into amendment A1 to EN 60730-2-9:2002.
NOTE EN 60730-2-9 originally referred to EN 60730-1:1995 and its amendments. This amendment enables EN 60730-2-9 to be
used with EN 60730-1:2000. Consideration may be given to future editions of EN 60730-1.
__________
---------------------- Page: 3 ----------------------
– 3 – EN 60730-2-9:2002/A1:2003
Endorsement notice
The text of amendment 1:2002 to the International Standard IEC 60730-2-9:2000 was approved by
CENELEC as an amendment to the European Standard with agreed common modifications as given
below. These modifications also modify the common modifications in EN 60730-2-9:2002.
COMMON MODIFICATIONS
2 Definitions
2.2.9 Delete the existing common modification.
2.2.601 Delete.
7 Information
‘602)’
Table 7.2 Add to item 110 the footnote reference .
Delete in item 111 ‘a manual reset thermal cut-out or’.
Delete in item 601 the reference to 2.2.9.
Delete the existing common modification which introduces items 602, 603 and 604.
Delete the common modification introducing note 601.
14 Heating
14.4.3.1 Delete the existing common modification.
16 Environmental stress
Delete the existing common modification.
17 Endurance
17.15 Replace the existing common modifications for 17.15 with:
17.15.1.3 Delete the text in parenthesis.
17.15.1.3.1 Delete the text in parenthesis.
17.15.2 Delete the existing common modification.
17.15.2.1 Delete the existing common modification.
17.16.101 Delete the last line.
Annex H
H.26.9 Delete the existing common modification.
Annex AA
Delete the ‘in some countries’ note.
_____________
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE IEC
60730-2-9
INTERNATIONAL
2000
STANDARD
AMENDEMENT 1
AMENDMENT 1
2002-08
Amendement 1
Dispositifs de commande électrique automatiques
à usage domestique et analogue –
Partie 2-9:
Règles particulières pour les dispositifs
de commande thermosensibles
Amendment 1
Automatic electrical controls for household
and similar use –
Part 2-9:
Particular requirements for temperature
sensing controls
IEC 2002 Droits de reproduction réservés Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
L
Commission Electrotechnique Internationale
PRICE CODE
International Electrotechnical Commission
Международная Электротехническая Комиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
60730-2-9 Amend 1 IEC:2002 – 3 –
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic controls for
household use.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/544/FDIS 72/551/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of the base publication and its amendments will
remain unchanged until 2004. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
_____________
Page 7
FOREWORD
Replace, on page 9, the existing text of the first paragraph with the following new text:
This part is intended to be used in conjunction with IEC 60730-1. It was established on the
basis of the third edition, issued in 1999. Consideration may be given to future editions of, or
amendments to, IEC 60730-1.
Replace, on page 9, the “in some countries” note with the following note:
The “in some countries” notes regarding differing national practice are contained in the following subclauses:
– 4.1.101
– table 7.2, note 102
– 11.4.3.101
– 11.4.101
– 11.101
– 12.101.3
– 13.2
– 17.8.4.101
– 17.15.1.3
– 17.15.1.3.1
– 17.16.102
– 17.16.105
– 18.102.3
– 23.101
– annex C
– annex D
– annex AA
– CC.2
---------------------- Page: 6 ----------------------
60730-2-9 Amend 1 IEC:2002 – 5 –
Page 13
1 Scope and normative references
Replace the existing subclause 1.1.5 by the following:
1.1.5 This part 2-9 applies to single operation devices as defined in this standard.
Page 15
1.2 Replace “660 V” with “690 V”.
2 Definitions
2.2 Definitions of types of control according to purposes
Replace existing definition 2.2.9 by the following new definitions:
2.2.9
single operation device (SOD)
control having a temperature sensing element which is intended to operate only once and then
requires complete replacement
2.2.9.1
bi-metallic single operation device
single operation device having a bi-metallic temperature sensing element
NOTE 1 A bi-metallic single operation device does not reset above a declared temperature (see 11.4.103).
NOTE 2 Requirements for thermal links (which are not allowed to reset) are contained in IEC 60691.
2.2.9.2
non-bi-metallic single operation device
part of a control the operation of which cannot be separated from other functions of the control
and having a non bi-metallic sensing element that operates only once and then requires
complete or partial replacement
NOTE When such parts can be tested separately, they are considered to be thermal links within the scope of IEC
60691.
2.2.9.2.1
rated functioning temperature (T )
f
temperature of the sensing element of a non bi-metallic SOD which causes it to change the
state of conductivity of the control when measured under specified conditions as declared by
the manufacturer
2.2.9.2.2
holding temperature (T )
c
maximum temperature of the sensing element of a non bi-metallic SOD at which it will not
cause the control to change its state of conductivity during a specified time under specified
conditions as declared by the manufacturer
---------------------- Page: 7 ----------------------
60730-2-9 Amend 1 IEC:2002 – 7 –
2.2.9.2.3
maximum temperature limit (T )
m
temperature of the sensing element of a non bi-metallic SOD, stated by the manufacturer, up to
which the mechanical and electrical properties of the control having changed its state of
conductivity, will not be impaired for a given time
Add, on page 17, after 2.2.104, the following new definition 2.2.105:
2.2.105
voltage maintained thermal cut-out
thermal cut-out which is maintained in its operated condition by the voltage which appears
across it in that condition
Page 17
4 General notes on tests
4.1.101
Replace, on page 19, “some countries” with “Canada and the USA” in the “in some countries”
paragraph.
6 Classification
6.4 According to features of au
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.