SIST EN ISO 3907:2009

Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)

This International Standard specifies a gravimetric method for the determination of the mass fraction of total carbon in carbides and hardmetals. This method is applicable to - carbides of chromium, hafnium, molybdenum, niobium, tantalum, titanium, vanadium, tungsten and zirconium, - mixtures of these carbides and binder metals, free of lubricant, - all grade of presintered or sintered hardmetals, produced from these carbides, and having a mass fraction of total carbon exceeding 4 %.

Hartmetalle - Bestimmung des Gesamtkohlenstoff-Gehaltes - Gravimetrisches Verfahren (ISO 3907:2009)

Diese Internationale Norm legt ein gravimetrisches Verfahren zur Bestimmung des Gesamtkohlenstoff-Gehaltes von Carbiden und Hartmetallen fest.

Métaux-durs - Dosage du carbone total - Méthode gravimétrique (ISO 3907:2009)

L'ISO 3907:2009 spécifie une méthode gravimétrique de dosage du carbone total (fraction massique de carbone total) dans les carbures et les métaux-durs.
Elle est applicable aux
carbures de chrome, hafnium, molybdène, niobium, tantale, titane, vanadium, tungstène et zirconium,
mélanges de ces carbures et de métaux liants non lubrifiés,
métaux-durs de toutes nuances, préfrittés ou frittés, produits à partir de ces carbures,
dont la fraction massique de carbone total est supérieure à 4 %.

Trdine - Določevanje celotnega ogljika - Gravimetrijska metoda (ISO 3907:2009)

General Information

• Status: Published
• Publication Date: 13-Oct-2009
• ICS: 77.160 - Powder metallurgy
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Oct-2009
• Due Date: 17-Dec-2009
• Completion Date: 14-Oct-2009
• Ref Project: EN ISO 3907:2009 - Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)

Relations

• Replaces: SIST EN 23907:2000 - Hardmetals - Determination of total carbon content - Gravimetric method (ISO 3907:1985)
• Effective Date: 01-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3907:2009
01-december-2009
1DGRPHãþD
SIST EN 23907:2000
7UGLQH'RORþHYDQMHFHORWQHJDRJOMLND*UDYLPHWULMVNDPHWRGD,62
Hardmetals - Determination of total carbon - Gravimetric method (ISO 3907:2009)
Hartmetalle - Bestimmung des Gesamtkohlenstoff-Gehaltes - Gravimetrisches Verfahren
(ISO 3907:2009)
Métaux-durs - Dosage du carbone total - Méthode gravimétrique (ISO 3907:2009)
Ta slovenski standard je istoveten z: EN ISO 3907:2009
ICS:
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3907:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3907:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 3907:2009


EUROPEAN STANDARD
EN ISO 3907

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2009
ICS 77.160 Supersedes EN 23907:1993
English Version
Hardmetals - Determination of total carbon - Gravimetric method
(ISO 3907:2009)
Métaux-durs - Dosage du carbone total - Méthode Hartmetalle - Bestimmung des Gesamtkohlenstoff-
gravimétrique (ISO 3907:2009) Gehaltes - Gravimetrisches Verfahren (ISO 3907:2009)
This European Standard was approved by CEN on 29 September 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3907:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3907:2009
EN ISO 3907:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3907:2009
EN ISO 3907:2009 (E)
Foreword
This document (EN ISO 3907:2009) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the
latest by April 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 23907:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3907:2009 has been approved by CEN as a EN ISO 3907:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 3907:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 3907:2009

INTERNATIONAL ISO
STANDARD 3907
Third edition
2009-10-01


Hardmetals — Determination of total
carbon — Gravimetric method
Métaux-durs — Dosage du carbone total — Méthode gravimétrique





Reference number
ISO 3907:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 3907:2009
ISO 3907:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO 2009 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 3907:2009
ISO 3907:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 3907 was prepared by Technical Committee ISO/TC 119, Powder metallurgy, Subcommittee SC 4,
Sampling and testing methods for hardmetal.
This third edition cancels and replaces the second edition (ISO 3907:1985), which has been technically
revised.

© ISO 2009 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 3907:2009

---------------------- Page: 10 ----------------------

SIST EN ISO 3907:2009
INTERNATIONAL STANDARD ISO 3907:2009(E)

Hardmetals — Determination of total carbon — Gravimetric
method
1 Scope
This International Standar
...