iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 28041:2002

(Main)

Human response to vibration - Measuring instrumentation (ISO 8041:1990)

Human response to vibration - Measuring instrumentation (ISO 8041:1990)

This EN specifies instrumentation for a method of measurement of vibration in a given frequency range, given in ISO 2631-1 for assessing the vibration as perceived by human beings. It applies to instrumentation for the measurement of hand-arm vibration and/or whole-body vibration.

Schwingungseinwirkung auf den Menschen - Meßeinrichtung (ISO 8041:1990)

Réponse des individus aux vibrations - Appareillage de mesure (ISO 8041:1990)

Human response to vibration - Measuring instrumentation (ISO 8041:1990)

General Information

Status
Withdrawn
Publication Date
31-Dec-2001
Withdrawal Date
30-Sep-2005
ICS
13.160 - Vibration and shock with respect to human beings
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Oct-2005
Due Date
01-Oct-2005
Completion Date
01-Oct-2005
Ref Project
ENV 28041:1993 - Human response to vibration - Measuring instrumentation (ISO 8041:1990)

Relations

Replaced By
SIST EN ISO 8041:2005 - Human response to vibration - Measuring instrumentation (ISO 8041:2005)
Effective Date
01-Oct-2005

Buy Standard

ENV 28041:2002ENV 28041:2002
PreviousNext
Standardization document
ENV 28041:2002
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 28041:2002
01-januar-2002
Human response to vibration - Measuring instrumentation (ISO 8041:1990)
Human response to vibration - Measuring instrumentation (ISO 8041:1990)
Schwingungseinwirkung auf den Menschen - Meßeinrichtung (ISO 8041:1990)
Réponse des individus aux vibrations - Appareillage de mesure (ISO 8041:1990)
Ta slovenski standard je istoveten z: ENV 28041:1993
ICS:
13.160 Vpliv vibracij in udarcev na Vibration and shock with
ljudi respect to human beings
SIST ENV 28041:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 28041:2002

---------------------- Page: 2 ----------------------

SIST ENV 28041:2002

---------------------- Page: 3 ----------------------

SIST ENV 28041:2002

---------------------- Page: 4 ----------------------

SIST ENV 28041:2002

---------------------- Page: 5 ----------------------

SIST ENV 28041:2002

---------------------- Page: 6 ----------------------

SIST ENV 28041:2002

---------------------- Page: 7 ----------------------

SIST ENV 28041:2002

---------------------- Page: 8 ----------------------

SIST ENV 28041:2002

---------------------- Page: 9 ----------------------

SIST ENV 28041:2002

---------------------- Page: 10 ----------------------

SIST ENV 28041:2002

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 5349-2:2002(Main)
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001)
EN ISO 5349-2:2001

This part of ISO 5349 provides guidelines for the measurement and evaluation of hand-transmitted vibration at the workplace in accordance with ISO 5349-1.
This part of ISO 5349 describes the precautions to be taken to make representative vibration measurements and to determine the daily exposure time for each operation in order to calculate the 8-h energy-equivalent vibration total value (daily vibration exposure). This part of ISO 5349 provides a means to determine the relevant operations which should be taken into account when determining the vibration exposure.
This part of ISO 5349 applies to all situations where people are exposed to vibration transmitted to the hand-arm system by hand-held or hand-guided machinery, vibrating workpieces, or controls of mobile or fixed machinery.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5349-1:2002(Main)
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001)
EN ISO 5349-1:2001
  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST CR 1030-1:2000(Main)
Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery
CR 1030-1:1995

This EN describes feasable ways in which possible hand-arm vibration hazard associated with hand-held, hand-guided and other machinery may be reduced by machinery design in order to provide practical professional aid to designers and manufacturers of machinery.

  • Standardization document
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13090-1:2000(Main)
Mechanical vibration and shock - Guidance on safety aspects of tests and experiments with people - Part 1: Exposure to whole-body mechanical vibration and repeated shock (ISO 13090-1:1998)
EN ISO 13090-1:1998
  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10819:2013/A2:2022(Amendment)
Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
EN ISO 10819:2013/A2:2022

2021-10-04 - publication on hold - Received lack of compliance at Enquiry stage.
2021-08-24 - publication on hold - TC decision is missing to skip FV. 2021-10-04 decision received.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 28927-13:2022(Main)
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)
EN ISO 28927-13:2022

This document specifies a laboratory method for measuring the vibration at the handle of fastener
driving tools. It is a type test procedure for establishing the vibration value on the handle of a handheld power tool operating under a specified load.
This document is applicable to fastener driving tools driven pneumatically or by other means, using
nails, staples or pins.
This document is applicable to tools with single sequential actuation, contact actuation, contact
actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).
This document is not applicable to tools operating in full sequential mode due to their much longer
intervals in between individual actuations. However, to provide an indication for comparison of
different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.
NOTE Today current knowledge does not allow any conclusions regarding physiological and pathological
effects between isolated shocks and continuous shock sequences, and their repetition rates

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 2631-2:2022(Main)
Mechanical vibration and shock - Evaluation of human exposure to wholebody vibration - Part 2: Vibration in buildings (1 Hz to 80 Hz)
ISO 2631-2:2003

ISO 2631-2:2003 concerns human exposure to whole-body vibration and shock in buildings with respect to the comfort and annoyance of the occupants. It specifies a method for measurement and evaluation, comprising the determination of the measurement direction and measurement location. It defines the frequency weighting Wm which is applicable in the frequency range 1 Hz to 80 Hz where the posture of an occupant does not need to be defined.
Whilst it is often the case that a building will be available for experimental investigation, many of the concepts contained within ISO 2631-2 would apply equally to a building in the design process or where it will not be possible to gain access to an existing building. In these cases, reliance will have to be placed on the prediction of the building response by some means.
ISO 2631-2 does not provide guidance on the likelihood of structural damage, which is discussed in ISO 4866. Further, it is not applicable to the evaluation of effects on human health and safety.
Acceptable magnitudes of vibration are not stated in ISO 2631-2.
The mathematical definition of the frequency weighting Wm is given in Annex A. Guidelines for collecting data concerning complaints about building vibration are given in Annex B.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
SIST
SIST ISO 2631-1:2022(Main)
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements
ISO 2631-1:1997

This part of IS0 2631 defines methods for the measurement of periodic, random and transient whole-body
vibration. It indicates the principal factors that combine to determine the degree to which a vibration exposure will
be acceptable. Informative annexes indicate current opinion and provide guidance on the possible effects of
vibration on health, comfort and perception and motion sickness. The frequency range considered is
- 0,5 Hz to 80 Hz for health, comfort and perception, and
- 0,l Hz to 0,5 Hz for motion sickness.
Although the potential effects on human performance are not covered, most of the guidance on whole-body
vibration measurement also applies to this area. This part of IS0 2631 also defines the principles of preferred
methods of mounting transducers for determining human exposure. It does not apply to the evaluation of extrememagnitude single shocks such as occur in vehicle accidents.
This part of IS0 2631 is applicable to motions transmitted to the human body as a whole through the supporting
surfaces: the feet of a standing person, the buttocks, back and feet of a seated person or the supporting area of a
recumbent person. This type of vibration is found in vehicles, in machinery, in buildings and in the vicinity of
working machinery.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
  • Standard
    33 pages
    French language
    sale 15% off
SIST
SIST ISO 2631-1:2022/Amd 1:2022(Amendment)
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements - AMENDMENT 1
ISO 2631-1:1997/Amd 1:2010
  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day