SIST-TS CEN/TS 15379:2007
(Main)Building management - Terminology and scope of services
Building management - Terminology and scope of services
The document provides a structure of Building Management (BM) and its Building Services and gives terms and definitions in the field of Building Management for general understanding. The document does not purport to describe Building Management Systems.
Gebäudemanagement - Begriffe und Leistungen
Diese Technische Spezifikation enthält eine Gliederung des Gebäudemanagements (GM) und dessen technischer Gebäudeausrüstung und legt zum besseren allgemeinen Verständnis Begriffe und Definitionen für den Bereich des Gebäudemanagements fest. Diese Technische Spezifikation dient nicht der Beschreibung von Gebäudemanagementsystemen.
Gestion technique du bâtiment - Terminologie et étendue des services
Upravljanje stavb - Terminologija in področje uporabe storitev
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 15379:2007
01-februar-2007
8SUDYOMDQMHVWDYE7HUPLQRORJLMDLQSRGURþMHXSRUDEHVWRULWHY
Building management - Terminology and scope of services
Gebäudemanagement - Begriffe und Leistungen
Gestion technique du bâtiment - Terminologie et étendue des services
Ta slovenski standard je istoveten z: CEN/TS 15379:2006
ICS:
01.040.03 Storitve. Organizacija Services. Company
podjetja, vodenje in kakovost. organization, management
Uprava. Transport. and quality. Administration.
Sociologija. (Slovarji) Transport. Sociology.
(Vocabularies)
03.080.99 Druge storitve Other services
91.040.01 Stavbe na splošno Buildings in general
SIST-TS CEN/TS 15379:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 15379:2007
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 15379:2007
TECHNICAL SPECIFICATION
CEN/TS 15379
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2006
ICS 01.040.03; 01.040.91; 03.080.99; 91.040.01
English Version
Building management - Terminology and scope of services
Gestion technique du bâtiment - Terminologie et étendue Gebäudemanagement - Begriffe und Leistungen
des services
This Technical Specification (CEN/TS) was approved by CEN on 28 February 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15379:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Abbreviations and acronyms .6
5 Structure of Building management.7
5.1 General.7
5.2 Technical building management.7
5.3 Infrastructural building management .8
5.4 Financial building management.8
6 Building management services.8
6.1 General.8
6.2 Services relating to technical building management.8
Annex A (informative) Services relating to infrastructural building management .11
A.1 Introduction.11
A.2 Catering .12
A.3 Data processing services .12
A.4 Grounds maintenance.12
A.5 Caretaking services.12
A.6 Internal mail service .13
A.7 Copying and printing.13
A.8 Parking management .13
A.9 Cleaning and upkeep.13
A.10 Security services .13
A.11 Removal services.14
A.12 Goods and logistics services .14
A.13 Winter services .14
A.14 Central telecommunications services .15
A.15 Disposal services.15
A.16 Supply management.15
A.17 Space management .15
Annex B (informative) Services relating to financial building management.17
B.1 Introduction.17
B.2 Procurement management .17
B.3 Budget and controlling .17
B.4 Property accountancy .18
B.5 Contract management.18
Bibliography .19
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
Foreword
This document (CEN/TS 15379:2006) has been prepared by Technical Committee CEN/TC 247 “Building
automation, control and building management”, the secretariat of which is held by SNV.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this CEN Technical Specification : Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
Introduction
This document defines the code of practice that applies for services relating to the management of buildings
and properties. The definitions are intended to serve the unification of the various terms hitherto used and the
associated services with the aim of creating more transparency on the market and assist CEN/TC 247 in
standardizing of:
– Technical building management systems, tools and methods
– Connections and interfaces between the different building management processes
Building services relating to technical building management are listed in this document.
For a better understanding of the whole building management process, the services relating to infrastructural
and financial building management which are not alone under the scope of CEN/TC 247 are listed in the
informative annexes A and B.
The interdependencies of services in terms of strategic management and operation of buildings will be defined
in more detail in the European standards for Facility Management by CEN/TC 348.
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
1 Scope
The document provides a structure of Building Management (BM) and its Building Services and gives terms
and definitions in the field of Building Management for general understanding. The document does not purport
to describe Building Management Systems.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 15221-1 Facility Management – Part 1: Terms and definitions
EN ISO 16484-2 Building automation and control systems (BACS) —
Part 2: Hardware (ISO 16484-2:2004)
EN ISO 16484-3 Building automation and control systems (BACS) —
Part 3: Functions (ISO 16484-3:2005)
3 Terms and definitions
This clause presents the vocabulary used in this document. The terms and definitions listed in this document
but defined by other relevant European Standards are repeated below for convenience in most cases.
For the purposes of this document, the following terms and definitions apply.
3.1
building
cf. property 3.8
large volume individual fixed structure other than industrial structures, i.e. commercial, industrial or
commercial residential premises
[EN ISO 16484-2]
3.2
building automation and control
BAC
description for products, software, and engineering services for automatic controls, monitoring and
optimization, human intervention and management to achieve energy – efficient, economical and safe
operation of building services equipment
[EN ISO 16484-2]
3.3
building automation and control system
BACS
system, comprising all products and engineering services for automatic controls (including interlocks),
monitoring, optimization, for operation, human intervention and management to achieve energy – efficient,
economical and safe operation of building services
NOTE 1 The use of the word ‘control’ does not imply that the system/device is restricted to control functions. Processing
5
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
of data and information is possible.
NOTE 2 If a building control system, building management system or building energy management system complies with
the requirements of the EN ISO 16484 standard series, it should be designated as a building automation and control
system (BACS).
[EN ISO 16484-2]
3.4
building management
BM
totality of services involved in the management operation and monitoring of buildings (including plants and
installations). Building management can be assigned as part of Facility Management.
cf. property 3.8
3.5
building services
BS
1) utilities and installations supplied and distributed within a building such as electricity, gas, heating,
water, and communications
[EN ISO 16484-2]
3.6
commercial building management
CBM
former term of financial building management (see 5.3)
[EN ISO 16484-2]
3.7
facility management
FM
an integrated process to support and improve the effectiveness of the primary activities of an organisation by
the management and delivery of agreed support services for the appropriate environment that is needed to
achieve its changing objectives
[EN 15221-1]
3.8
property
building or building unit or other construction which is utilized and operated for specific functions
cf. building 3.4
4 Abbreviations and acronyms
For the purposes of this document, the following abbreviations and acronyms apply.
BAC Building Automation and Control
BACS Building Automation and Control System
BM Building Management
BS Building Services
FBM Financial Building Management
FM Facility Management
6
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
IBM Infrastructural Building Management
TBM Technical Building Management
5 Structure of Building management
5.1 General
Building management is characterized by a holistic approach, it encompasses in addition to technical services
also to infrastructural and financing services.
Building management is divided into three areas: technical building management, infrastructural building
management and financial building management (see Figure 1). BAC is part of Technical Building
Management.
Building management services are related to the use of buildings and properties and may use as part of
Facility Management.
Financial Infrastructural
BM BM
Building
Technical
Management
BM
(BM)
BAC
Figure 1 — Areas covered by building management
5.2 Technical building management
All services necessary for the operation and management of a building, and any installations and plants (e.g.
for HVAC, Sanitary, Electricity, Lighting, Fire protection, Security, Access etc.) associated with the building.
Building automation and control is part of TBM.
7
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 15379:2007
CEN/TS 15379:2006 (E)
5.3 Infrastructural building management
All services providing business support to improve the use of buildings.
5.4 Financial building management
All services paying due regard to the principles of real estate economy relating to technical building
management and infrastructural building management.
6 Building management services
6.1 General
Building management provides a precise and comprehensive definition of all user requirements. I
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.