SIST EN 4074:2009

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C

This standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa 1) / 425 °C.

Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelänge, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1100 MPa (bei Raumtemperatur)/425 °C

Diese Norm legt die Eigenschaften für Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelänge,
aus Titanlegierung, aluminium-IVD-beschichtet, fest.
Klasse: 1 100 MPa1) / 425 °C2)

Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à tolérance large, filetage moyen, en alliage de titane, revêtues d'aluminium IVD - Classification: 490 MPa (à température ambiante)/425 °C

Aeronavtika - Vijaki, valjasta glava, šestzoba vdolbina, široka toleranca, srednja navojna dolžina, iz titanove zlitine, prevlečene z aluminijem IVD - Klasifikacija: 1100 MPa (pri temperaturi okolice)/425 °C

General Information

• Status: Published
• Publication Date: 20-Aug-2009
• ICS: 49.025.20 - Aluminium
• ICS: 49.025.30 - Titanium
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Jul-2009
• Due Date: 17-Sep-2009
• Completion Date: 21-Aug-2009
• Ref Project: EN 4074:2009 - Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelänge, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1100 MPa (bei Raumtemperatur)/425 °CSérie aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à tolérance large, filetage moyen, en alliage de titane, revêtues d'aluminium IVD - Classification: 490 MPa (à température ambiante)/425 °CAerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studs49.025.30TitanTitanium49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 4074:2009SIST EN 4074:2009en,de01-oktober-2009SIST EN 4074:2009SLOVENSKI
STANDARD



SIST EN 4074:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4074
July 2009 ICS 49.030.20 English Version
Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
Série aérospatiale - Vis à tête cylindrique, à empreinte six lobes, tige normale à tolérance large, filetage moyen, en alliage de titane, revêtues d'aluminium IVD - Classification: 490 MPa (à température ambiante) / 425 °C
Luft- und Raumfahrt - Flachkopfschrauben mit Sechs-Bogenzahn, mit mittlerer Gewindelänge, aus Titanlegierung, Aluminium IVD beschichtet - Klasse: 1 100 MPa (bei Raumtemperatur) / 425 °C This European Standard was approved by CEN on 6 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4074:2009: ESIST EN 4074:2009



EN 4074:2009 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Required characteristics .5 4 Designation .8 5 Marking .8 6 Technical specification .8
SIST EN 4074:2009



EN 4074:2009 (E) 3 Foreword This document (EN 4074:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4074:2009



EN 4074:2009 (E) 4 1 Scope This standard
...