SIST EN 4636:2009

Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C

This standard specifies the characteristics of screws with 100° countersunk head, with six lobe recess, short thread, in titanium alloy TI-P64001, aluminium pigmented coating, for aerospace applications.

Luft- und Raumfahrt - 100° Senkschrauben, kurzes Gewinde, Sechs-Bogenzahn,aus Titanlegierung TI-P64001, mit aluminium pigmentierter Beschichtung - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C

Diese Norm legt die Eigenschaften für 100° Senkrschrauben mit Sechs-Bogenzahn und kurzem Gewinde aus Titanlegierung TI-P64001 mit aluminiumpigmentierter Beschichtung zur Anwendung in der Luft- und Raum¬fahrt fest.

Série aérospatiale - Vis, 100° à tête fraisée, à filetage court, à empreinte six lobes,en alliage de titane TI-P64001, avec revêtement alumino-organique - Classification: 1 100 MPa (à température ambiante) / 315 °C

La présente norme spécifie les caractéristiques des vis, 100° à tête fraisée, à filetage court, à empreinte six
lobes, en alliage de titane TI-P64001 avec revêtement alumino-organique pour applications aérospatiales.

Aeronavtika - Vijaki, 100° ugrezna glava, šestzoba vdolbina, kratek navoj, iz titanove zlitine TI-P64001, z aluminijem pigmentiranim premazom - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C

General Information

• Status: Published
• Publication Date: 22-Jun-2009
• ICS: 49.025.20 - Aluminium
• ICS: 49.025.30 - Titanium
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 10-Jun-2009
• Due Date: 15-Aug-2009
• Completion Date: 23-Jun-2009
• Ref Project: EN 4636:2009 - Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315 °C

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4636:2009
01-september-2009
Aeronavtika - Vijaki, 100° ugrezna glava, šestzoba vdolbina, kratek navoj, iz
titanove zlitine TI-P64001, z aluminijem pigmentiranim premazom - Klasifikacija:
1100 MPa (pri temperaturi okolice)/315 °C
Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in
titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa
(at ambient temperature) / 315 °C
Luft- und Raumfahrt - 100° Senkschrauben, kurzes Gewinde, Sechs-Bogenzahn,aus
Titanlegierung TI-P64001, mit aluminium pigmentierter Beschichtung - Klasse: 1 100
MPa (bei Raumtemperatur) / 315 °C
Série aérospatiale - Vis, 100° à tête fraisée, à filetage court, à empreinte six lobes,en
alliage de titane TI-P64001, avec revêtement alumino-organique - Classification: 1 100
MPa (à température ambiante) / 315 °C
Ta slovenski standard je istoveten z: EN 4636:2009
ICS:
49.025.20 Aluminij Aluminium
49.025.30 Titan Titanium
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 4636:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4636:2009

---------------------- Page: 2 ----------------------

SIST EN 4636:2009


EUROPEAN STANDARD
EN 4636

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2009
ICS 49.030.10
English Version
Aerospace series - Screws, 100° countersunk head, six lobe
recess, short thread, in titanium alloy TI-P64001, with aluminium
pigmented coating - Classification: 1 100 MPa (at ambient
temperature) / 315 °C
Série aérospatiale - Vis, 100° à tête fraisée, à filetage Luft- und Raumfahrt - 100° Senkschrauben, kurzes
court, à empreinte six lobes,en alliage de titane TI-P64001, Gewinde, Sechs-Bogenzahn,aus Titanlegierung TI-P64001,
avec revêtement alumino-organique - Classification: 1 100 mit aluminium pigmentierter Beschichtung - Klasse: 1 100
MPa (à température ambiante) / 315 °C MPa (bei Raumtemperatur) / 315 °C
This European Standard was approved by CEN on 20 March 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4636:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4636:2009
EN 4636:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Required characteristics .4
3.1 Configuration – Dimensions – Tolerances – Masses .4
3.2 Materials .4
3.3 Surface treatment .5
3.4 Tolerances of form and position .5
4 Designation .6
5 Marking .7
6 Technical specification .7
6.1 General .7
6.2 Approval of manufacturers .7
6.3 Qualification of bolts .7
6.4 Requirement deleted .
...