SIST EN 50655-1:2018
(Main)Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
This European Standard specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV.
Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it may be carried out in combination with the accessory type tests.
NOTE Information on health and safety is given in Annex A.
Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung - Teil 1: Fingerprintprüfungen für Reaktionsharzmassen
Diese Europäische Norm legt die Prüfverfahren und Anforderungen für Fingerprintprüfung (entsprechend 3.9), an lösemittelfreien aushärtbaren Reaktionsharzmassen, die als elektrische Isolierung und/oder mechanischer Schutz für Kabelgarnituren nach EN 50393, HD 629-1 und HD 629-2 fest, die für Nieder- und Mittelspannung bis 20,8/36 (42) kV eingesetzt werden.
Fingerprintprüfung an Werkstoffen ist nicht zwingend mit Typprüfungen von Garnituren verbunden. Sie wird als eigenständige Prüfung betrachtet, darf aber auch in Kombination mit Typprüfungen von Garnituren durchgeführt werden.
ANMERKUNG Informationen zu Gesundheit und Sicherheit enthält Anhang A.
Câbles électriques - Accessoires - Caractérisation des matériaux - Partie 1: Essais d'identification pour les composés résineux
La présente Norme européenne spécifie les méthodes et les exigences d’essai pour les essais d’identification (tels qu’ils sont définis en 3.9) des composés résineux réactifs polymérisables sans solvant destinés à être utilisés pour l’isolation électrique et/ou la protection mécanique dans les accessoires de câbles couverts par l’EN 50393, le HD 629.1 et le HD 629.2, pour la basse et la moyenne tension jusqu’à 20,8/36 (42) kV.
Il n’existe pas de lien obligatoire entre les essais d’identification des matériaux et les essais de type des accessoires. Ils sont considérés comme des essais indépendants, mais ils peuvent être réalisés conjointement avec les essais de type des accessoires.
NOTE Des informations sur la santé et la sécurité sont données à l’Annexe A.
Električni kabli - Pribor - Značilnosti materialov - 1. del: Identifikacija materiala za smolne zmesi
Ta evropski standard določa preskusne metode in zahteve preskusov za identifikacijo materiala (kot je opredeljeno v točki 3.9) za reagirajoče smolne zmesi, ki jih je mogoče polimerizirati, ne vsebujejo topil ter se predvidoma uporabljajo za električno izolacijo in mehansko zaščito v kabelskih pripomočkih za uporabo v nizko- in srednjenapetostnih sistemih z napetostjo do 20,8/36 (42) kV, kot je opredeljeno v standardih EN 50393, HD 629.1 ter HD 629.2.
Preskušanje materialov na podlagi identifikacije se ne povezuje nujno s tipskim preskušanjem pripomočkov. Obravnava se kot sklop samostojnih preskusov, vendar se lahko izvaja v kombinaciji s tipskimi preskusi pripomočkov.
OPOMBA: Podatki o varovanju zdravja in varnosti so podani v dodatku A.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung - Teil 1: Fingerprintprüfungen für ReaktionsharzmassenCâbles électriques - Accessoires - Caractérisation des matériaux - Partie 1: Essais d'identification pour les composés résineuxElectric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds29.060.20KabliCables29.035.20PDWHULDOLPlastics and rubber insulating materialsICS:Ta slovenski standard je istoveten z:EN 50655-1:2017SIST EN 50655-1:2018en01-januar-2018SIST EN 50655-1:2018SLOVENSKI
STANDARDSIST HD 631.1 S2:20081DGRPHãþD
SIST EN 50655-1:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 50655-1
November 2017 ICS 29.035.20
Supersedes
HD 631.1 S2:2007English Version
Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
Câbles électriques - Accessoires - Caractérisation des matériaux - Partie 1: Essais d'identification pour les composés résineux
Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung - Teil 1: Fingerprintprüfungen für Reaktionsharzmassen This European Standard was approved by CENELEC on 2017-09-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50655-1:2017 ESIST EN 50655-1:2018
EN 50655-1:2017 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 4 4 Fingerprinting . 5 4.1 General . 5 4.2 Sampling . 6 4.3 Preparation and conditioning . 6 4.4 Sequence of tests . 6 4.5 Test report . 6 Annex A (informative)
Health and safety . 9
Tables Table 1 — Fingerprinting tests — Test methods and requirements . 8
SIST EN 50655-1:2018
EN 50655-1:2017 3 European foreword This document (EN 50655-1:2017) has been prepared by CLC/TC 20 “Electric cables”. The following dates are fixed: – latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-09-18 – latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-09-18 This document supersedes HD 631.1 S2:2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. EN 50655 series will consist of the following: – EN 50655-1, Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds; – EN 50655-2, Electric cables - Accessories - Material characterization - Part 2: Fingerprinting for heat shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV; – EN 50655-3, Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV. NOTE It has been assumed in the preparation of this document that the execution of its provisions will be entrusted to appropriately qualified and experienced people, for whose use it has been produced. WARNING This European Standard calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage. SIST EN 50655-1:2018
EN 50655-1:2017 4 1 Scope This European Standard specifies the test methods and requirements of tests for fingerprinting (as defined in 3.9) of solvent-free polymerizable, reacting resinous compound intended to be used for electrical insulation and/or mechanical protection in cable accessories covered by EN 50393, HD 629.1 and HD 629.2, for low and medium voltage up to 20,8/36 (42) kV. Fingerprinting testing of materials does not have a mandatory link to type testing of accessories. It is regarded as stand-alone tests, but it may be carried out in combination with the accessory type tests. NOTE Information on health and safety is given in Annex A. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 50393, Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV EN 60455-1, Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements (IEC 60455-1) EN 60455-2, Resin based reactive compounds
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.