Caplights for use in mines susceptible to firedamp -- Part 2: Performance and other safety-related matters

This part of IEC 62013 details those performance and other safety features of caplights, including those with a point of connection for another apparatus, not covered in IEC 62013-1, but which are important for the safety and working conditions of the user. It may also be applied to caplights for use in mines not likely to be endangered by firedamp. When this part of the standard is used as a "stand-alone" document for non-gassy mines, any relevant constructional requirements should be the subject of agreement between the supplier and the user and, where possible, be as described in IEC 62013-1.

Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen -- Teil 2: Gebrauchstauglichkeit und Sicherheit

Lampes-chapeaux utilisables dans les mines grisouteuses -- Partie 2: Performance et autres sujets relatifs à la sécurité

Cette partie de la EN 62013 détaille l'aptitude à la fonction et autres caractéristiques de sécurité des lampes-chapeaux, y compris celles ayant un point de connexion pour d'autres matériels, non couverts par la EN 62013-1, mais qui sont importantes pour la sécurité et les conditions de travail de l'utilisateur. Elle peut aussi s'appliquer aux lampes-chapeaux utilisées dans les mines non grisouteuses.

Rudarske naglavne svetilke za uporabo v rudnikih, kjer se lahko pojavi jamski eksplozivni plin - 2. del: Lastnosti in druge z varnostjo povezane teme (IEC 62013-2:2005)

General Information

Status
Published
Publication Date
30-Nov-2006
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2006
Due Date
01-Dec-2006
Completion Date
01-Dec-2006

Relations

Buy Standard

Standard
SIST EN 62013-2:2006
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62013-2:2006
01-december-2006
1DGRPHãþD
SIST EN 62013-2:2001
Rudarske naglavne svetilke za uporabo v rudnikih, kjer se lahko pojavi jamski

eksplozivni plin - 2. del: Lastnosti in druge z varnostjo povezane teme (IEC 62013-

2:2005)

Caplights for use in mines susceptible to firedamp - Part 2: Performance and other safety

-related matters
Kopfleuchten für die Verwendung in schlagwettergefährdeten Grubenbauen - Teil 2:
Gebrauchstauglichkeit und Sicherheit

Lampes-chapeaux utilisables dans les mines grisouteuses - Partie 2: Performance et

autres sujets relatifs à la sécurité
Ta slovenski standard je istoveten z: EN 62013-2:2006
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
73.100.20 3UH]UDþHYDOQD Ventilation, air-conditioning
NOLPDWL]DFLMVNDLQ and illumination equipment
UD]VYHWOMHYDOQDRSUHPD
SIST EN 62013-2:2006 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62013-2
NORME EUROPÉENNE
July 2006
EUROPÄISCHE NORM
ICS 29.260.20 Supersedes EN 62013-2:2000
English version
Caplights for use in mines susceptible to firedamp
Part 2: Performance and other safety-related matters
(IEC 62013-2:2005)
Lampes-chapeaux utilisables Kopfleuchten für die Verwendung
dans les mines grisouteuses in schlagwettergefährdeten Grubenbauen
Partie 2: Performance et autres sujets Teil 2: Gebrauchstauglichkeit
relatifs à la sécurité und Sicherheit
(CEI 62013-2:2005) (IEC 62013-2:2005)

This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 62013-2:2006 E
---------------------- Page: 2 ----------------------
EN 62013-2:2006 - 2 -
Foreword

The text of document 31/586A/FDIS, future edition 2 of IEC 62013-2, prepared by IEC TC 31, Equipment

for explosive atmospheres, was submitted to the IEC-CENELEC parallel vote and was approved by

CENELEC as EN 62013-2 on 2006-02-01.
This European Standard supersedes EN 62013-2:2000.

The general revision and updating of EN 62013-2:2000 is a result of feedback from the manufacturers

and the certifiers following the use of the standard. Its purpose is clarification and the elimination of any

ambiguities. Account has also been taken of changes in related standards.

Apart from the general revision and updating, the main technical differences from EN 62013-2:2000 are

Clause 5 to accommodate new LED technology and reflector / lens design and to allow calculation as an

alternative to testing, and, as a result, simplification of the illumination type test in Clause 8.

The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-02-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice

The text of the International Standard IEC 62013-2:2005 was approved by CENELEC as a European

Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62013-2:2006
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

applies.
Publication Year Title EN/HD Year
IEC 60050-845 1987 International Electrotechnical Vocabulary - -
(IEV)
Chapter 845: Lighting
IEC 60983 1995 Miniature lamps EN 60983 1996
IEC 62013-1 2005 Caplights for use in mines susceptible to EN 62013-1 2006
firedamp
Part 1: General requirements - Construction
and testing in relation to the risk of explosion
ISO 1000 - SI units and recommendations for the use of - -
their multiples and of certain other units
Undated reference.
---------------------- Page: 4 ----------------------
NORME CEI
INTERNATIONALE
IEC
62013-2
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2005-10
Lampes-chapeaux utilisables
dans les mines grisouteuses –
Partie 2:
Performance et autres sujets
relatifs à la sécurité
Caplights for use in mines
susceptible to firedamp –
Part 2:
Performance and other safety-
related matters
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved

Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any

utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including

électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from

microfilms, sans l'accord écrit de l'éditeur. the publisher.

International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland

Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch

CODE PRIX
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 5 ----------------------
62013-2  IEC:2005(E) – 3 –
CONTENTS

FOREWORD...........................................................................................................................5

1 Scope...............................................................................................................................9

2 Normative references .......................................................................................................9

3 Terms and definitions .......................................................................................................9

4 General ............................................................................................................................9

5 Light output ....................................................................................................................11

5.1 Light sources.........................................................................................................11

5.2 Light source holder................................................................................................11

5.3 Luminous intensity ................................................................................................11

5.4 Auxiliary light source .............................................................................................11

5.5 Focus ....................................................................................................................11

6 Reliability .......................................................................................................................11

6.1 Lamp life ...............................................................................................................11

6.2 Battery life (charge/discharge cycles) ....................................................................13

6.3 Caplight useful working period...............................................................................13

6.4 Durability...............................................................................................................13

7 Ergonomics ....................................................................................................................13

7.1 Mass .....................................................................................................................13

7.2 Ease of operation ..................................................................................................13

7.3 Maintainability .......................................................................................................13

8 Type tests ......................................................................................................................15

8.1 Illumination throughout the useful working period ..................................................15

8.2 Lamp life ...............................................................................................................15

9 Instructions.....................................................................................................................15

10 Marking ..........................................................................................................................17

Annex A (informative) Examples of the manufacturer’s instructions on user routine

testing ..................................................................................................................................19

Figure A.1 – Schematic drawing of a typical photometric sphere...........................................21

Table A.1 – Tabulation of tests .............................................................................................23

---------------------- Page: 6 ----------------------
62013-2  IEC:2005(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CAPLIGHTS FOR USE IN MINES
SUSCEPTIBLE TO FIREDAMP –
Part 2: Performance and other safety-related matters
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any

equipment declared to be in conformity with an IEC Publication.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62013-2 has been prepared by IEC technical committee 31:

Equipment for explosive atmospheres.

This second edition cancels and replaces the first edition (2000) and constitutes a technical

revision.
The general revision and updating of Edit
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.