Non-cellulosic papers for electrical purposes -- Part 1: Definitions and general requirements (IEC 60819-1:2009)

This part of IEC 60819 gives the definitions and general requirements for non-cellulosic papers for electrical purposes. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. SAFETY WARNING It is the responsibility of the user of the methods contained or referred to in this document to ensure that they are used in a safe manner.

Zellulosefreie Papiere für elektrotechnische Zwecke – Teil 1: Begriffe und allgemeine Anforderungen

Papiers non cellulosiques à usages électriques -- Partie 1: Définitions et exigences générales

La CEI 60819-1:2009 donne les définitions et les exigences générales pour les papiers non cellulosiques à usages électriques. Les changements principaux par rapport à l'édition précédente sont les suivants: la liste des matériaux qui doivent être utilisées ensemble a été mise à jour en y ajoutant les nouveaux matériaux issus des progrès de la technologie, et se trouve en 2.7 et 2.8.

Brezcelulozni papirji za uporabo na področju elektrike - 1. del: Definicije in splošne zahteve (IEC 60819-1:2009)

Ta del standarda IEC 60819 vsebuje definicije in splošne zahteve za brezcelulozne papirje za uporabo na področju elektrike. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar mora uporabnik material za specifično uporabo izbrati glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije. VARNOSTNO OPOZORILO Končni uporabnik je odgovoren za zagotavljanje varne uporabe metod, ki so zajete ali omenjene v tem dokumentu.

General Information

Publication Date
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
Due Date
Completion Date


Buy Standard

EN 60819-1:2013
English language
10 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

SIST EN 60819-1:2013
SIST EN 60819-1:1998
SIST EN 60819-1:1998/A1:1998
Non-cellulosic papers for electrical purposes -- Part 1: Definitions and general
requirements (IEC 60819-1:2009)
Papiers non cellulosiques à usages électriques -- Partie 1: Définitions et exigences
Ta slovenski standard je istoveten z: EN 60819-1:2012
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
SIST EN 60819-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60819-1:2013

---------------------- Page: 2 ----------------------

SIST EN 60819-1:2013

EN 60819-1

February 2012

ICS 29.035.10 Supersedes EN 60819-1:1995 + A1:1996

English version

Non-cellulosic papers for electrical purposes -
Part 1: Definitions and general requirements
(IEC 60819-1:2009)

Papiers non cellulosiques à usages Vliesstoffe auf Kunststofffaserbasis für
électriques - elektrotechnische Zwecke -
Partie 1: Définitions et exigences Teil 1: Begriffe und allgemeine
générales Anforderungen
(CEI 60819-1:2009) (IEC 60819-1:2009)

This European Standard was approved by CENELEC on 2012-02-14. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60819-1:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60819-1:2013
EN 60819-1:2012 - 2 -

This document (EN 60819-1:2012) consists of the text of IEC 60819-1:2009 prepared by IEC/TC 15
"Solid electrical insulating materials".

The following dates are fixed:
(dop) 2012-11-14
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2015-02-14
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60819-1:1995 + A1:1996.
EN 60819-1:2012 includes the following significant technical changes with respect to EN 60819-1:1995:

The list of materials to be used in combination was updated with the addition of new materials made
available by progress in technology and described in Subclauses 2.7 and 2.8.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent

Endorsement notice
The text of the International Standard IEC 60819-1:2009 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60819-3-1 NOTE  Harmonized as EN 60819-3-1.
IEC 60819-3-2 NOTE  Harmonized as EN 60819-3-2.
IEC 60819-3-3 NOTE  Harmonized as EN 60819-3-3.
IEC 60819-3-4 NOTE  Harmonized as EN 60819-3-4.

---------------------- Page: 4 ----------------------

SIST EN 60819-1:2013
IEC 60819-1
Edition 3.0 2009-09

Non-cellulosic papers for electrical purposes –
Part 1: Definitions and general requirements

Papiers non cellulosiques à usages électriques –
Partie 1: Définitions et exigences générales

ICS 29.035.10 ISBN 978-2-88910-304-1
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60819-1:2013
– 2 – 60819-1 © IEC:2009


Part 1: Definitions and general requirements

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) A

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.