SIST EN 60763-1:2011

Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements (IEC 60763-1:2010)

This part of IEC 60763 contains the definitions required for the understanding of all three parts of IEC 60763, the classification of material into types, and the general requirements applicable to all material covered by the standard. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Blockspan für elektrotechnische Anwendungen - Teil 1: Begriffe, Einteilung und allgemeine Anforderungen (IEC 60763-1:2010)

Cartons comprimés et contrecollés à usages électriques - Partie 1: Définitions, classification et exigences générales (CEI 60763-1:2010)

La CEI 60763-1:2010 contient les définitions requises pour la compréhension de l'ensemble des trois parties de la CEI 60763, la classification des matériaux en types et les exigences générales applicables à tous les matériaux couverts par la norme. Les principales modifications par rapport à l'édition précédente est la spécification a été alignée avec la deuxième édition de la CEI 60641-1(2007).

Večplastni prešpanski papir za elektrotehniko - 1. del: Definicije, razvrstitev in splošne zahteve (IEC 60763-1:2010)

Ta del IEC 60763 vsebuje definicije, potrebne za razumevanje vseh treh delov IEC 60763, razvrstitev materialov po vrstah in splošne zahteve, veljavne za vse materiale, ki jih zajema ta standard. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri taki uporabi, ne le na podlagi same specifikacije.

General Information

• Status: Published
• Publication Date: 06-Mar-2011
• ICS: 29.035.10 - Paper and board insulating materials
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Feb-2011
• Due Date: 16-Apr-2011
• Completion Date: 07-Mar-2011
• Ref Project: EN 60763-1:2011 - Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements

Relations

• Replaces: SIST EN 60763-1:1998 - Specification for laminated pressboard -- Part 1: Definitions, classification and general requirements
• Effective Date: 01-Jan-2014
• Replaces: SIST EN 60763-1:1998 - Specification for laminated pressboard -- Part 1: Definitions, classification and general requirements
• Effective Date: 28-Jan-2023
• Revised: SIST EN 60763-1:1998 - Specification for laminated pressboard -- Part 1: Definitions, classification and general requirements
• Effective Date: 07-Jan-2014
• Replaces: SIST EN 60763-1:1998 - Specification for laminated pressboard -- Part 1: Definitions, classification and general requirements
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60763-1:2011
01-april-2011
1DGRPHãþD
SIST EN 60763-1:1998
9HþSODVWQLSUHãSDQVNLSDSLU]DHOHNWURWHKQLNRGHO'HILQLFLMHUD]YUVWLWHYLQ
VSORãQH]DKWHYH,(&
Laminated pressboard for electrical purposes - Part 1: Definitions, classification and
general requirements (IEC 60763-1:2010)
Blockspan für elektrotechnische Anwendungen - Teil 1: Begriffe, Einteilung und
allgemeine Anforderungen (IEC 60763-1:2010)
Cartons comprimés et contrecollés à usages électriques - Partie 1: Définitions,
classification et exigences générales (CEI 60763-1:2010)
Ta slovenski standard je istoveten z: EN 60763-1:2011
ICS:
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
SIST EN 60763-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60763-1:2011

---------------------- Page: 2 ----------------------

SIST EN 60763-1:2011

EUROPEAN STANDARD
EN 60763-1

NORME EUROPÉENNE
February 2011
EUROPÄISCHE NORM

ICS 29.035.10 Supersedes EN 60763-1:1996


English version


Laminated pressboard for electrical purposes -
Part 1: Definitions, classification and general requirements
(IEC 60763-1:2010)


Cartons comprimés et contrecollés à Blockspan für elektrotechnische
usages électriques - Anwendungen -
Partie 1: Définitions, classification et Teil 1: Begriffe, Einteilung und allgemeine
exigences générales Anforderungen
(CEI 60763-1:2010) (IEC 60763-1:2010)




This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60763-1:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60763-1:2011
EN 60763-1:2011 - 2 -
Foreword
The text of document 15/536/CDV, future edition 2 of IEC 60763-1, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60763-1 on 2011-01-02.
This European Standard supersedes EN 60763-1:1996.
The main changes with respect to EN 60763-1:1996 are as follows:
– the specification was brought in line with EN 60641-1:2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-02
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-02
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60763-1:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60763-1:2011
- 3 - EN 60763-1:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60641-1 2007 Pressboard and presspaper for electrical EN 60641-1 2008
purposes -
Part 1: Definitions and general requirements

---------------------- Page: 5 ----------------------

SIST EN 60763-1:2011

---------------------- Page: 6 ----------------------

SIST EN 60763-1:2011
IEC 60763-1
®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Laminated pressboard for electrical purposes –
Part 1: Definitions, classification and general requirements

Cartons comprimés et contrecollés à usages électriques –
Partie 1: Définitions, classification et exigences générales

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
F
CODE PRIX
ICS 29.035.10 ISBN 978-2-88912-145-8
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60763-1:2011
– 2 – 60763-1 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

LAMINATED PRESSBOARD FOR ELECTRICAL PURPOSES –

Part 1: Definitions, classification and general requirements


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications.
...