oSIST prEN 131-3:2011
(Main)Ladders - Part 3: User Instructions Information
Ladders - Part 3: User Instructions Information
This European Standard advises on the safe use of ladders covered by the scope of EN 131 1 and fulfilling the requirements of EN 131 1, EN 131 2 and, for single or multiple hinged-joint ladders, EN 131 4 used as standing or leaning ladders.
Leitern - Teil 3: Benutzerinformation
Diese Europäische Norm enthält Hinweise für den sicheren Gebrauch von Leitern, die in den
Anwendungsbereich der EN 131-1 fallen und die Anforderungen der EN 131-1, der EN 131-2 sowie im Falle
von Ein- oder Mehrgelenkleitern der EN 131-4 erfüllen.
Échelles - Partie 3: Informations contenues dans les instructions destinées à l'utilisateur
La présente Norme européenne donne des instructions de sécurité et des informations destinées à l’utilisateur, au sujet de l’utilisation en toute sécurité des échelles relevant du domaine d’application de l’EN 131 1 et conformes aux exigences de l’EN 131-1, de l’EN 131-2 et de l’EN 131-4 en ce qui concerne les échelles articulées simples ou multiples utilisées comme échelles d'appui ou échelles doubles.
Lestve - 3. del: Navodila in informacije za uporabnike
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 131-3:2010
01-februar-2010
Lestve - 3. del: Varnostna navodila in informacije za uporabnike
Ladders - Part 3: Safety instructions and user information
Leitern - Teil 3: Benutzerinformation
Échelles - Partie 3: Instructions de sécurité et informations destinées à l'utilisateur
Ta slovenski standard je istoveten z: prEN 131-3
ICS:
97.145 Lestve Ladders
oSIST prEN 131-3:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 131-3:2010
---------------------- Page: 2 ----------------------
oSIST prEN 131-3:2010
EUROPEAN STANDARD
DRAFT
prEN 131-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2009
ICS 97.145 Will supersede EN 131-3:2007
English Version
Ladders - Part 3: Safety instructions and user information
Échelles - Partie 3: Instructions de sécurité et informations Leitern - Teil 3: Benutzerinformation
destinées à l'utilisateur
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 93.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 131-3:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Provision of safety instructions and user information .5
5 Reasons for accidents .5
6 Marking .6
6.1 Leaning ladders .6
6.1.1 Graphical symbols .6
6.1.2 Correct angle indicator .6
6.2 Standing ladders .6
6.3 Combination ladders .7
6.4 Single or multi-hinge joint ladders .8
6.5 Useable rungs or treads .8
6.5.1 Leaning ladders .8
6.5.2 Standing ladders .8
6.5.3 Extending standing ladder and combination ladders .9
6.5.4 Platforms on standing ladders .9
6.6 Other marking information for all ladders .9
7 User information .9
7.1 General .9
7.2 Before use . 10
7.3 Positioning and erecting the ladder. 10
7.4 Using the ladder . 11
7.5 Repair, maintenance and storage . 11
Annex A (informative) Examples of graphical symbols . 12
A.1 General . 12
A.2 Example graphical symbols . 12
Annex B Example of information on safe use of leaning ladder . 24
Annex C Example of information on safe use of standing ladder . 25
Bibliography . 26
2
---------------------- Page: 4 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
Foreword
This document (prEN 131-3:2009) has been prepared by Technical Committee CEN/TC 93 “Ladders”, the
secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 131-3:2007.
3
---------------------- Page: 5 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
1 Scope
This European Standard gives safety instructions and user information for the safe use of ladders covered by
the scope of EN 131-1 and fulfilling the requirements of EN 131-1, EN 131-2 and, for single or multiple hinged-
joint ladders, EN 131-4 used as standing or leaning ladders.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
Not applicable
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
producer
(a) manufacturer of a product and any other person presenting himself as the manufacturer by affixing to the
product his name, trade mark or other distinctive mark, or the person who reconditions the product
(b) other professionals in the supply chain, insofar as their activities may affect the safety properties of a
product
3.2
distributor
professional in the supply chain whose activity does not affect the safety properties of a product
3.3
owner
person or company buying or receiving the ladder
NOTE The owner can use the ladder himself, or he can make the ladder available for other users
3.4
user
person using the ladder
3.5
harm
physical injury or damage to health of people or damage to property or the environment
3.6
hazard
potential source of harm
3.7
risk
probable rate of occurrence of a hazard causing harm and the degree of severity of the harm
4
---------------------- Page: 6 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
4 Provision of safety instructions and user information
The producer shall be responsible for the content of the safety instructions and user information and the
provision of the instructions with each ladder.
The distributor should ensure that the safety instructions and user information are provided with each ladder.
The ladder owner should ensure that safety instructions and user information are available to the user.
The safety instructions and user information shall be in the language of the country where the ladder is sold.
5 Reasons for accidents
The following list of hazards and examples of their causes, which is not exhaustive, are common reasons for
accidents encountered when using ladders and are the basis on which the information in this standard has
been developed:
a) Loss of stability:
1) incorrect positioning of the ladder (such as incorrect angle for leaning ladder or not fully opening a
standing ladder);
2) slide outwards at the bottom (such as bottom of the ladders sliding away from the wall);
3) side slip, falling sideways and top flip (such as overreaching or fragile top contact surface);
4) condition of the ladder (such as missing anti-slip feet);
5) stepping off an unsecured ladder at height;
6) ground conditions (such as unstable soft ground, sloping ground, slippery surfaces or contaminated
solid surfaces);
7) adverse weather conditions (such as windy conditions);
8) collision with the ladder (such as vehicle or door);
9) incorrect choice of ladder (such as too short, unsuitable task).
b) From handling:
1) transferring the ladder to the work position;
2) erecting and dismantling the ladder;
3) carrying items up the ladder.
c) Slip trip and fall of user:
1) inappropriate footwear;
2) contaminated rungs or steps;
3) unsafe user practices (such as climbing 2 rungs at time, sliding down stiles).
d) Structural failure of ladder:
1) condition of the ladder (such as damaged stiles, wear, UV degradation of plastic parts);
2) overloading the ladder.
e) Electrical hazards:
1) unavoidable live working (e. g. fault finding);
2) positioning ladders too close to live electrical equipment (such as overhead power lines);
3) ladders damaging electrical equipment (such as covers or protective insulation);
4) incorrect selection of type of ladder for electrical work.
5
---------------------- Page: 7 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
6 Marking
6.1 Leaning ladders
6.1.1 Graphical symbols
The safety instructions that shall be included, as an easily viewed graphical symbol, marked on all ladders that
are designed to be used as leaning ladders is:
a) read the instructions (example Figure A.1);
b) maximum load (example Figure A.2);
c) correct angle of erection (example Figure A.3);
d) erect on a level base (example Figure A.4);
e) do not over-reach (example Figure A.5);
f) ensure ground is free from contaminants (example Figure A.6);
g) erect on a firm base (example Figure A.7);
h) ladder extension above landing point (example Figure A.8);
i) do not step off the side of a ladder (example Figure A.9);
j) use the ladder the correct way up [only if necessary due to design of ladder] (example Figure A.22).
6.1.2 Correct angle indicator
Each ladder designed to be used as a leaning ladder shall have indication or instructions affixed to the ladder
to show when it is erected at the correct angle according to the manufacturer's instructions.
6.2 Standing ladders
The safety instructions that shall be included, as an easily viewed graphical symbol, marked on all ladders that
are designed to be used as standing ladders is:
a) read the instructions (example Figure A.1);
b) maximum load (example Figure A.2);
c) erect on a level base (example Figure A.4);
d) fully opened before use (example Figure A.17);
e) do not overreach (example Figure A.5);
f) erect on a firm base (example Figure A.7);
g) do not step off the side of a ladder (example Figure A.9);
h) ensure restraint devices are engaged [if fitted] (example Figure A.21).
6
---------------------- Page: 8 ----------------------
oSIST prEN 131-3:2010
prEN 131-3:2009 (E)
6.3 Combination ladders
Where a combination ladder is designed to be used as a leaning ladder, the safety instructions included, as an
easily v
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.