Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery

This document, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, water recycling, mud treatment and sorting (other than screens) for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1:2020, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this part of EN 1009.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole lifetime of the machine (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to machinery for cleaning, recycling, mud treatment and sorting which are manufactured before the date of publication of this document by CEN.

Maschinen für die mechanische Aufbereitung von Mineralien und ähnlichen festen Stoffen - Sicherheit - Teil 5: Spezifische Anforderungen für Reinigungs-, Recycling-, Sortier- und Schlamm-Verarbeitungsmaschinen

Machines pour le traitement mécanique des minéraux et des matières solides similaires - Sécurité - Partie 5 : Prescriptions spécifiques pour machines de nettoyage, de recyclage et de traitement des boues

Stroji za mehansko obdelavo mineralov in podobnih trdnih snovi - Varnost - 5. del: Posebne zahteve za stroje za čiščenje, recikliranje, sortiranje in obdelavo blata

General Information

Status
Not Published
Public Enquiry End Date
27-Feb-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
03-Jan-2024
Due Date
22-May-2024

Relations

Buy Standard

Draft
EN 1009-5:2020/oprA1:2024
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1009-5:2020/oprA1:2024
01-februar-2024
Stroji za mehansko obdelavo mineralov in podobnih trdnih snovi - Varnost - 5. del:
Posebne zahteve za stroje za čiščenje, recikliranje, sortiranje in obdelavo blata
Machines for mechanical processing of minerals and similar solid materials - Safety -
Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment
machinery
Maschinen für die mechanische Aufbereitung von Mineralien und ähnlichen festen
Stoffen - Sicherheit - Teil 5: Spezifische Anforderungen für Reinigungs-, Recycling-,
Sortier- und Schlamm-Verarbeitungsmaschinen
Machines pour le traitement mécanique des minéraux et des matières solides similaires -
Sécurité - Partie 5 : Prescriptions spécifiques pour machines de nettoyage, de recyclage
et de traitement des boues
Ta slovenski standard je istoveten z: EN 1009-5:2020/prA1
ICS:
13.110 Varnost strojev Safety of machinery
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
91.220 Gradbena oprema Construction equipment
SIST EN 1009-5:2020/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1009-5:2020/oprA1:2024

---------------------- Page: 2 ----------------------
SIST EN 1009-5:2020/oprA1:2024


DRAFT
EUROPEAN STANDARD
EN 1009-5:2020
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
December 2023
ICS 73.120; 91.220
English Version

Machines for mechanical processing of minerals and
similar solid materials - Safety - Part 5: Specific
requirements for cleaning, recycling, sorting and mud
treatment machinery
Machines pour le traitement mécanique des minéraux Maschinen für die mechanische Aufbereitung von
et des matières solides similaires - Sécurité - Partie 5 : Mineralien und ähnlichen festen Stoffen - Sicherheit -
Prescriptions spécifiques pour machines de nettoyage, Teil 5: Spezifische Anforderungen für Reinigungs-,
de recyclage et de traitement des boues Recycling-, Sortier- und Schlamm-
Verarbeitungsmaschinen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 151.

This draft amendment A1, if approved, will modify the European Standard EN 1009-5:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1009-5:2020/prA1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1009-5:2020/oprA1:2024
EN 1009-5:2020/prA1:2023 (E)

Contents Page
European foreword . 3
1 Modification to the whole document . 4
2 Modification to the Contents . 4
3 Modification to the European foreword . 4
4 Modifications to Clause 1, “Scope” . 4
5 Modification to Clause 2, “Normative references” .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.