Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures - Amendment A3

This European standard defines the structural and operational characteristics, the safety requirements and test methods, the marking, of low-pressure, non adjustable regulators for butane, propane or their mixtures, referred to in the body of the text as "regulators".
This European Standard covers regulators supplied at vapour pressure by one or several portable cylinders. They are normally directly connected to the cylinder valve or the self closing valve.
The regulators covered by this standard are designed for a maximum outlet pressure of up to and including 200 mbar and a maximum rate of up to and including 4 kg/h.
This European Standard also applies to the safety devices which are supplied as part of the regulators. The characteristics of these devices are given in annex A and B.
The requirements of this European Standard apply generally to regulators used in locations where the temperature likely to be reached during use is between - 20 °C and + 50 °C, + 50 °C being the maximum temperature allowable for the cylinder. When the devices are subjected to temperatures below this range, they shall comply with special requirements defined in annex C.
Regulators designed for specific purposes (caravans and motor caravans) which are subjected to special
require-ments are dealt with in annex D.
This European standard does not include the installation rules for regulators and their possible associated safety devices. In this matter, reference should be made to national regulations in force in the member countries.
Regulators which are intended to be used with gases containing methylacetylene and propadiene are excluded from the scope of this European Standard.
This European standard only covers type testing.
WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators
The top part of these figures (above the horizontal line) applies to the regulator and is normative.

Festeingestellte Druckregelgeräte mit einem Höchstreglerdruck bis einschließlich 200 mbar und einem Durchfluss bis einschließlich 4 kg/h für Butan, Propan und deren Gemische sowie die dazugehörigen Sicherheitseinrichtungen - Änderung A3

Détendeurs à réglage fixe, à pression de détente maximale inférieure ou égale à 200 mbar, de débit inférieur ou égal à 4 kg/h, et leurs dispositifs de sécurité associés pour butane, propane ou leurs mélanges - Amendement A3

Nizkotlačni nenastavljivi regulatorji z največjim izhodnim tlakom do vključno 200 mbar, s pretokom do vključno 4 kg/h in pripadajočimi varnostnimi napravami za butan, propan ali njune zmesi - Dopolnilo A3

General Information

Status
Withdrawn
Publication Date
17-Aug-2009
Withdrawal Date
02-Dec-2013
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Nov-2013
Due Date
21-Dec-2013
Completion Date
03-Dec-2013

Relations

Buy Standard

Amendment
EN 12864:2002/A3:2009
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12864:2002/A3:2009
01-september-2009
1L]NRWODþQLQHQDVWDYOMLYLUHJXODWRUML]QDMYHþMLPL]KRGQLPWODNRPGRYNOMXþQR
PEDUVSUHWRNRPGRYNOMXþQRNJKLQSULSDGDMRþLPLYDUQRVWQLPLQDSUDYDPL]D
EXWDQSURSDQDOLQMXQH]PHVL'RSROQLOR$
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than
or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated
safety devices for butane, propane or their mixtures - Amendment A3
Festeingestellte Druckregelgeräte mit einem Höchstreglerdruck bis einschließlich 200
mbar und einem Durchfluss bis einschließlich 4 kg/h für Butan, Propan und deren
Gemische sowie die dazugehörigen Sicherheitseinrichtungen - Änderung A3
Détendeurs à réglage fixe, à pression de détente maximale inférieure ou égale à 200
mbar, de débit inférieur ou égal à 4 kg/h, et leurs dispositifs de sécurité associés pour
butane, propane ou leurs mélanges - Amendement A3
Ta slovenski standard je istoveten z: EN 12864:2001/A3:2009
ICS:
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN 12864:2002/A3:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12864:2002/A3:2009

---------------------- Page: 2 ----------------------

SIST EN 12864:2002/A3:2009
EUROPEAN STANDARD
EN 12864:2001/A3
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2009
ICS 23.060.40
English Version
Low-pressure, non adjustable regulators having a maximum
outlet pressure of less than or equal to 200 mbar, with a
capacity of less than or equal to 4 kg/h, and their associated
safety devices for butane, propane or their mixtures
Détendeurs à réglage fixe, à pression de détente maximale Festeingestellte Druckregelgeräte mit einem
inférieure ou égale à 200 mbar, de débit inférieur ou égal à Höchstreglerdruck bis einschließlich 200 mbar und einem
4 kg/h, et leurs dispositifs de sécurité associés pour Durchfluss bis einschließlich 4 kg/h für Butan, Propan und
butane, propane ou leurs mélanges deren Gemische sowie die dazugehörigen
Sicherheitseinrichtungen
This amendment A3 modifies the European Standard EN 12864:2001; it was approved by CEN on 23 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.