Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

This document specifies the requirements relating to:
Steel X2NiCoMo18-8-5 (1.6359)
Vacuum induction melted and vacuum arc remelted
Solution treated and precipitation treated
Plates
6 mm < a ≤ 40 mm
1 750 MPa ≤ Rm ≤ 2 000 MPa
for aerospace applications.
NOTE   ASD-STAN designation: FE-PM2701
Material number: 1.6359

Luft- und Raumfahrt - Stahl X2NiCoMo18-8-5 (1.6359) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode im Vakuum umgeschmolzen - Lösungsgeglüht und ausgelagert - Platten - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

Série aérospatiale - Acier X2NiCoMo18-8-5 (1.6359) - Élaboré sous vide et refondu par arc sous vide - Mis en solution et vieilli - Plaques - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

Aeronavtika - Jeklo X2NiCoMo18-8-5 (1.6359) - Indukcijsko vakuumsko taljeno in obločno vakuumsko pretaljeno - Topilno žarjeno in utrjeno z obarjenjem - Plošče - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa

General Information

Status
Not Published
Public Enquiry End Date
11-Sep-2024
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
01-Jul-2024
Due Date
18-Nov-2024

Relations

Buy Standard

Draft
prEN 3532:2024
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2024
Aeronavtika - Jeklo X2NiCoMo18-8-5 (1.6359) - Indukcijsko vakuumsko taljeno in
obločno vakuumsko pretaljeno - Topilno žarjeno in utrjeno z obarjenjem - Plošče -
6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) - Vacuum induction melted and
vacuum arc remelted - Solution treated and precipitation treated - Plates - 6 mm < a ≤ 40
mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
Luft- und Raumfahrt - Stahl X2NiCoMo18-8-5 (1.6359) - Vakuuminduktionserschmolzen
und mit selbstverzehrender Elektrode im Vakuum umgeschmolzen - Lösungsgeglüht und
ausgelagert - Platten - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa
Série aérospatiale - Acier X2NiCoMo18-8-5 (1.6359) - Élaboré sous vide et refondu par
arc sous vide - Mis en solution et vieilli - Plaques - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm
≤ 2 000 MPa
Ta slovenski standard je istoveten z: prEN 3532
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2024
ICS 49.025.10 Will supersede EN 3532:2007
English Version
Aerospace series - Steel X2NiCoMo18-8-5 (1.6359) -
Vacuum induction melted and vacuum arc remelted -
Solution treated and precipitation treated - Plates - 6 mm <
a  40 mm - 1 750 MPa  Rm  2 000 MPa
Série aérospatiale - Acier X2NiCoMo18-8-5 (1.6359) - Luft- und Raumfahrt - Stahl X2NiCoMo18-8-5 (1.6359)
Élaboré sous vide et refondu par arc sous vide - Mis en - Vakuuminduktionserschmolzen und mit
solution et vieilli - Plaques - 6 mm < a  40 mm - 1 750 selbstverzehrender Elektrode im Vakuum
umgeschmolzen - Lösungsgeglüht und ausgelagert -
MPa  Rm  2 000 MPa
Platten - 6 mm < a  40 mm - 1 750 MPa  Rm  2 000
MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3532:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
European foreword
This document (prEN 3532:2024) has been prepared by ASD-STAN.
After enquiries and votes ca
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.