Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard

This product standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions:
Associated electrical connector(s)   :   EN 3660-002
Temperature range,   Class N   :    65 °C to 200 °C
Class W   :    65 °C to 175 °C
Class K   :    65 °C to 260 °C
Class A   :    65 °C to 200 °C

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und EN 4067 - Produktnorm

Diese Produktnorm legt eine Reihe von Endgehäusen, Bauform A, 90°, nicht abgedichtet, mit Zugentlastungsklemme für die Verwendung unter den folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder   :   EN 3660-002
Temperaturreihe,   Klasse N   :   -65 °C bis 200 °C
Klasse W   :   -65 °C bis 175 °C
Klasse K   :   -65 °C bis 260 °C
Klasse A   :   -65 °C bis 200 °C

Série aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90° non étanche type A avec brides serre-câble pour EN 2997 et EN 4067 - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 005. del: Kabelska spojka, tip A, netesnjena, z razbremenilno sponko za EN 2997 in EN 4067 - Standard za proizvod

General Information

Status
Withdrawn
Publication Date
19-Apr-2009
Withdrawal Date
18-Nov-2009
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Nov-2009
Due Date
09-Dec-2009
Completion Date
19-Nov-2009

Relations

Buy Standard

Standard
EN 3660-005:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90° Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und EN 4067 - ProduktnormSérie aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 005 : Raccord coudé à 90° non étanche type A avec brides serre-câble pour EN 2997 et EN 4067 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90°, unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-005:2006SIST EN 3660-005:2009en,de01-maj-2009SIST EN 3660-005:2009SLOVENSKI
STANDARD



SIST EN 3660-005:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-005
August 2006 ICS 49.060 English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 005: Cable outlet, style A, 90° , unsealed with clamp strain relief for EN 2997 and EN 4067 - Product standard
Série aérospatiale - Accessoires arrières pour connecteurs circulaires et rectangulaires électriques et optiques -Partie 005 : Raccord coudé à 90°
non étanche type A avec brides serre-câble pour EN 2997 et EN 4067 - Norme de produit
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 005: Endgehäuse, Bauform A, 90°
Ausführung, nicht abgedichtet, mit Zugentlastungsklemme für EN 2997 und EN 4067 - Produktnorm This European Standard was approved by CEN on 20 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-005:2006: ESIST EN 3660-005:2009



EN 3660-005:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Characteristics.4 5 Designation.11 6 Marking.12 7 Technical specification.12
SIST EN 3660-005:2009



EN 3660-005:2006 (E) 3 Foreword This European Standard (EN 3660-005:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3660-005:2009



EN 3660-005:2006 (E) 4 1 Scope This product standard defines a range of cable outlets, style A, 90°, unsealed with clamp strain relief for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : − 65 °C to 200 °C Class W : − 65 °C to 175 °C Class K : − 65 °C to 260 °C Class A : − 65 °C to 200 °C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-*, Aerospace series — Elements of electrical and optical connection — Test methods — EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification.
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards.
AS 85049A, Connector Accessories, Electrical General Specification for- 1). 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figure 1 and Table 1. For interface dimensions, see 4.2. All dimensions in millimetres.
* All its parts
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.