SIST EN 17988-3:2025
(Main)Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements
Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements
This document specifies the technical requirements for the circular design and recyclability of fishing gear and aquaculture equipment,containing plastic and which can be applied in the design and manufacturing of such gear.
The requirements are related to the designand manufacturing of fishing gear, using the principals of the waste hierarchy and avoiding hazardous substances, to ensure that gearstays in use for as long as possible and sustainable endof life waste management is facilitated to enable reuse and recycling of materials.
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 3: Technische Anforderungen
Dieses Dokument legt die technischen Anforderungen an Komponenten von Fischfanggeräten und Aquakulturausrüstungen (im Folgenden als „Fanggeräte“ bezeichnet) fest, die Kunststoffe enthalten. Es legt die wesentlichen Grundsätze und Prozesse fest, die die Kreislauffähigkeit und das Recycling der Kunststoffkomponenten von Fanggeräten und der Materialien, aus denen die Komponenten des Fanggeräts bestehen, verbessern, wobei die Auswirkungen solcher Anforderungen auf den Gebrauch der Fanggeräte berücksichtigt werden. Die technischen Anforderungen für das Design von Fanggeräten konzentrieren sich auf folgende Elemente:
Entwicklung und Auswahl von Materialien und Komponenten;
Verringerung der Verwendung von Kunststoff-Neumaterial;
Herstellung/Zusammenbau/Zerlegung;
Nutzung, Wartung, Reparatur, Wiederaufbereitung und Aufarbeitung;
Lagerung, Transport; und
Ende der Nutzungsdauer einschließlich Recycling und Upcycling.
Ausgenommen von diesem Dokument sind Gestaltungsaspekte im Zusammenhang mit der Verbesserung der Erfassung von Fischereien. Es sei denn, ein solches Design reduziert den Nutzen des Fanggeräts für die Fang- oder Aquakulturtechniken oder das Management.
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture - Partie 3 : Exigences techniques et lignes directrices
Le présent document spécifie les exigences techniques et les recommandations relatives aux composants des engins de pêche et des équipements d’aquaculture contenant du plastique.
Le présent document définit les principes et processus liés aux matériaux qui améliorent la circularité et le recyclage des composants et des matériaux qui les composent, en prenant en considération l’impact de telles exigences sur la fonctionnalité.
Les exigences techniques relatives à la conception des engins de pêche et des équipements d’aquaculture mettent l’accent sur les points suivants :
— le développement et le choix des matériaux et composants ;
— la production, l’assemblage et le démontage ;
— l’utilisation et la maintenance ;
— la réparation, le reconditionnement et la remise en état ;
— le stockage et le transport ; et
— la fin du cycle de vie, y compris le recyclage.
Le présent document exclut les aspects de conception liés à l’amélioration de la capture des ressources de pêche.
Krožna zasnova ribolovnega orodja in opreme za ribogojstvo - 3. del: Tehnične zahteve
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Krožna zasnova ribolovnega orodja in opreme za ribogojstvo - 3. del: Tehnične
zahteve
Circular design of fishing gear and aquaculture equipment - Part 3: Technical
requirements
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 3:
Technische Anforderungen
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture -
Partie 3 : Exigences techniques et lignes directrices
Ta slovenski standard je istoveten z: EN 17988-3:2024
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
65.150 Ribolov in ribogojstvo Fishing and fish breeding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17988-3
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 13.020.20; 65.150
English Version
Circular design of fishing gear and aquaculture equipment
- Part 3: Technical requirements and guidelines
Circularité et recyclabilité des engins de pêche et des Kreislaufwirtschaft von Fischfanggeräten und
équipements d'aquaculture - Partie 3 : Exigences Aquakulturausrüstungen - Teil 3: Technische
techniques et lignes directrices Anforderungen und Leitfaden
This European Standard was approved by CEN on 6 October 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17988-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Development and selection of materials and components . 6
5 Manufacture, assembly and disassembly . 7
6 Use and maintenance . 7
7 Repair, re-manufacturing and refurbishing. 8
8 Storage and transport . 8
9 End-of-use, including recycling . 8
Bibliography . 9
European foreword
This document (EN 17988-3:2024) has been prepared by Technical Committee CEN/TC 466 “Circularity
and recyclability of fishing gear and aquaculture equipment”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission (M/574). The Standing Committee of the EFTA States subsequently approves these requests
for its Member States.
This document is part of the EN 17988 series.
The EN 17988 series consists of the following parts, under the general title Circular design of fishing gear
and aquaculture equipment:
— Part 1: General requirements and guidelines
— Part 2: User manuals and labelling
— Part 3: Technical requirements and guidelines
— Part 4: Environmental and circularity requirements and guidelines
— Part 5: Circular business models
— Part 6: Requirements and guidelines for digitalization of information of components of fishing gear
and aquaculture equipment
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
As part of the European Green Deal, launched in 2019, the European Commission introduced measures
to move to a climate neutral and circular economy, together with a digital transition. One of the targets
in the transition to a circular economy was to reduce the amount of waste released into the environment
by decreasing the amount of waste generated, increasing the amount of waste collected and re-
introducing the materials regenerated from waste into the production of new products.
Specifically, the accumulation of plastics in marine and other aquatic environments were addressed in
two directives:
— The revised Port Reception Facilities (PRF) Directive [1] encourages fishers and aquaculturists to
bring not only their own end-of-use gear but also bring ashore abandoned, lost or otherwise
discarded (ALD) fishing gear and aquaculture equipment, thus encouraging waste to be carried back
to port.
— The Single Use Plastics (SUP) Directive [2], which lays down rules concerning different plastic
products, including fishing gear and aquaculture equipment containing plastics, and sets requirement
to the Member States to establish Extended Producer Responsibility (EPR) schemes. Concerning
fishing gear, it also contains rules on minimum national annual collection rates, together with
reporting on fishing gear placed on the market and waste fishing gear collected in ports.
In 2021, the standardization request M/574 on the circular design of fishing gear [3] was passed by the
European Commission and the Parliament and accepted by CEN, which forms the basis for this series of
documents (EN 17988 series). While the term ‘fishing gear’ is used predominantly in the SUP Directive
and M/574, both documents encompass aquaculture equipment.
The purpose of this series of documents is to provide stakeholders with requirements, recommendations
and guidelines to address the different aspects of circular design of fishing gear and aquaculture
equipment containing plastics, encourage preparing for reuse and facilitate recyclability at end-of-use.
These requirements are intended to be applied from the design phase across the entire life cycle of the
fishing gear and aquaculture equipment. This includes but is not limited to: manufacturing, use,
maintenance, repair, collection, sorting, preparation for recycling, reuse, remanufacture, disposal, uptake
of recycled content and recycling.
Although this standard is written for fishing gear and aquaculture equipment containing plastics, the
requirements, recommendations and guidelines are also applicable to other materials.
This series of documents does not address other important design criteria such as fishing or farming
efficiency. When implementing the requirements, recommendations and guidelines provided in these
documents, balanced trade-offs between all relevant criteria need to be taken into account.
This series of documents aims to contribute to the following UN Sustainable Development Goals (SDGs)
[4]:
— 9 Industry, innovation, and infrastructure,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.