SIST EN 17988-5:2025
(Main)Circular design of fishing gear and aquaculture equipment - Part 5: Circular business model
Circular design of fishing gear and aquaculture equipment - Part 5: Circular business model
This document lays out the requirements for organisations to establish, implement and maintain circular design of fishing gear and aquaculture equipment by integrating corresponding product requirements in their organisational procedures. The document will also incentivise new, innovative, circular business models. Opportunities for value retention and ‘second life’ of fishing gear and
aquaculture equipment will be part of this document.
Kreislaufwirtschaftliche Gestaltung von Fischfanggeräten und Aquakulturausrüstungen - Teil 5: Kreislaufwirtschaftliches Geschäftsmodell
Dieses Dokument enthält Anleitungen und grundlegende Prinzipien für die Entwicklung von kreislaufwirtschaftliche Geschäftsmodelle für Fischfanggeräte und Aquakulturausrüstungen.
Er zeigt Möglichkeiten zur Werterhaltung, zur Verlängerung der Produktlebensdauer und zum Recycling von Fischfanggeräten und Aquakulturausrüstungen auf.
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture - Partie 5 : Modèles d’économie circulaire
Le présent document fournit des lignes directrices et des principes fondamentaux pour l’élaboration de modèles d’économie circulaire pour les engins de pêche et les équipements d’aquaculture contenant du plastique.
Il traite des possibilités de conservation de la valeur, de prolongation de la durée de vie des produits et de recyclage des engins de pêche et des équipements d’aquaculture.
Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 5. del: Krožni poslovni model
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 5. del: Krožni
poslovni model
Circular design of fishing gear and aquaculture equipment - Part 5: Circular business
model
Kreislaufwirtschaftliche Gestaltung von Fischfanggeräten und Aquakulturausrüstungen -
Teil 5: Kreislaufwirtschaftliches Geschäftsmodell
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture -
Partie 5 : Modèles d’économie circulaire
Ta slovenski standard je istoveten z: EN 17988-5:2024
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
65.150 Ribolov in ribogojstvo Fishing and fish breeding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17988-5
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 13.020.20; 65.150
English Version
Circular design of fishing gear and aquaculture equipment
- Part 5: Circular business models
Circularité et recyclabilité des engins de pêche et des Kreislaufdesign von Fischfanggeräten und
équipements d'aquaculture - Partie 5 : Modèles Aquakulturausrüstungen - Teil 5:
d'économie circulaire Kreislaufwirtschaftliche Geschäftsmodelle
This European Standard was approved by CEN on 30 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17988-5:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions. 6
4 Principle . 7
4.1 General . 7
4.2 Value networks for fishing gear and aquaculture equipment . 8
5 Identification and list of benefits . 9
6 Identifying key elements for developing circular business models . 13
6.1 General . 13
6.2 Key elements . 13
6.3 Supportive measures . 15
Annex A (informative) Examples . 16
A.1 Example 1: Leasing/renting of fishing gear and aquaculture equipment . 16
A.2 Example 2: Take-back scheme for fishing gear and aquaculture equipment . 17
A.3 Example 3: Sharing . 18
A.4 Example 4: Service and maintenance contract . 19
Bibliography . 21
European foreword
This document (EN 17988-5:2024) has been prepared by Technical Committee CEN/TC 466
“Circularity and recyclability of fishing gear and aquaculture equipment”, the secretariat of which is
held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall
be withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the
European Commission (M/574). The Standing Committee of the EFTA States subsequently approves
these requests for its Member States.
This document is part of the EN 17988 series.
The EN 17988 series consists of the following parts, under the general title Circular design of fishing
gear and aquaculture equipment:
— Part 1: General requirements and guidelines
— Part 2: User manuals and labelling
— Part 3: Technical requirements and guidelines
— Part 4: Environmental and circularity requirements and guidelines
— Part 5: Circular business models
— Part 6: Requirements and guidelines for digitalization of information of components of fishing
gear and aquaculture equipment
Any feedback and questions on this document should be directed to the users’ national standards
body. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Introduction
As part of the European Green Deal, launched in 2019, the European Commission introduced
measures to move to a climate neutral and circular economy, together with a digital transition. One
of the targets in the transition to a circular economy was to reduce the amount of waste released into
the environment by decreasing the amount of waste generated, increasing the amount of waste
collected and re-introducing the materials regenerated from waste into the production of new
products.
Specifically, the accumulation of plastics in marine and other aquatic environments were addressed
in two directives:
— The revised Port Reception Facilities (PRF) Directive [1] encourages fishers and aquaculturists
to bring not only their own end-of-use gear but also bring ashore abandoned, lost or otherwise
discarded (ALD) fishing gear and aquaculture equipment, thus encouraging waste to be carried
back to port.
— The Single Use Plastics (SUP) Directive [2], which lays down rules concerning different plastic
products, including fishing gear and aquaculture equipment containing plastics, and sets
requirements to the Member States to establish Extended Producer Responsibility (EPR)
schemes. Concerning fishing gear, it also contains rules on minimum national annual collection
rates, together with reporting on fishing gear placed on the market and waste fishing gear
collected in ports.
In 2021, the standardization request M/574 on the circular design of fishing gear [3] was passed by
the European Commission and the parliament and accepted by CEN, which forms the basis for this
series of documents (EN 17988 series). While the term ‘fishing gear’ is used predominantly in the
SUP Directive and M/574, both documents encompass aquaculture equipment.
The purpose of this series of documents is to provide stakeholders with requirements,
recommendations and guidelines to address the different aspects of circular design of fishing gear
and aquaculture equipment containing plastics, encourage preparing for reuse and facilitate
recyclability at end-of-use. These requirements are intended to be applied from the design phase
across the entire life cycle of the fishing gear and aquaculture equipment. This includes but is not
limited to: manufacturing, use, maintenance, repair, collection, sorting, preparation for recycling,
reuse, remanufacture, disposal, uptake of recycled content and recycling.
Although this standard is written for fishing gear and aquaculture equipment containing plastics, the
requirements, recommendations and guidelines are also applicable to other materials.
This series of documents does not address other important design criteria such as fishing or farming
efficiency. When implementing the requirements, recommendations and guidelines provided in
these documents, balanced trade-offs between all relevant criteria need to be taken into account.
This series of documents aims to contribute to the following UN Sustainable Development Goals
(SDGs) [4]:
— 9 Industry, innovation, and infrastructure,
— 12 Responsible consumption and production,
— 14 Life below water, in particular target 14.1: ‘By 2025, prevent and significantly reduce marine
pollution of all kinds, in particular from land-based activities, including marine debris and
nutrient pollution.’
For a full outline of the parts of the standard, and how the parts relate to each other, see part 1.
Part 5 addresses developing circular business models for fishing gear and aquaculture equipment.
Circular business models are intended to keep a product in its original intended use for as long as
possible, as well as to provide business opportunities with other sectors. Such interactions enable
the development of completely new market and cooperation opportunities.
This document provides supporting guidelines for Extended Producer Responsibility (EPR) schemes
for fishing gear and aquaculture equipment.
Note to the reader on normative language: In this document, the following verbal forms are used in
accordance with the CEN/CENELEC Internal Regulations Part 3, Clause 7:
— “shall” indicates a requirement;
— “should” indicates a recommendation;
— “may” indicates a permission;
— “can” indicates a possibility or a capability
— “must” indicates an external constraint.
1 Scope
This document provides guidelines and fundamental principles for the development of circular
business models for fishing gear and aquaculture equipment containing plastics.
It discusses opportunities for value retention, product life extension and recycling of fishing gear and
aquaculture equipment.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
EN 17988-1, Circular design of fishing gear and aquaculture equipment – Part 1: General requirements
and guidelines
EN 17988-2, Circular design of fishing gear and aquaculture equipment – Part 2: User manuals and
labelling
EN 17988-4, Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and
circularity requirements and guidelines
EN 17988-6, Circular design of fishing gear and aquaculture equipment – Part 6: Requirements and
guidelines for digitalization of information of components of fishing gear and aquaculture equipment
CEN/TS 18101, Circular design of fishing gear and aquaculture equipment - Terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in CEN/TS 18101 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at http://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
4 Principle
4.1 General
Often the transition from a linear to a circular economy is depicted as the closing of the value chain
(see A) and B) in Figure 1), while it rather should be seen as the transition to a value network (see C)
in Figure 1). Only when looking beyond the life cycle of a specific product to the network of possible
combinations of the different stages of product life cycles can a material, component, part or product
remain in the (circular) economy as long as possi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.