SIST EN 17988-2:2025
(Main)Circular design of fishing gear and aquaculture equipment - Part 2: User manual and labelling
Circular design of fishing gear and aquaculture equipment - Part 2: User manual and labelling
This document specifies the requirements for the user manuals that accompany circular designed fishing gear and aquaculture equipment. The document provides general principles for a designer to determine the scope of the circular design of fishing gear and aquaculture
equipment for a particular item of fishing gear or its components and to develop user manuals, lists of spare parts, and maps of locations where damaged fishing gear can be returned and prepared for reuse.
The document specifies the requirements for gear/polymer labelling and marking, to ensure traceability of fishing gear components.
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 2: Benutzerhandbuch und Kennzeichnung
Dieses Dokument legt die Anforderungen an die Benutzerhandbücher und Informationen (einschließlich der Kennzeichnung) fest, die den für die Kreislaufwirtschaft entwickelten Fischfanggeräten und Aquakulturausrüstungen beiliegen, um die Rückverfolgbarkeit und die ordnungsgemäße Verwaltung während der Lebensdauer der Komponenten von Fischfanggeräten sicherzustellen.
Dieses Dokument gilt für alle Hersteller von Fischfanggeräten und Aquakulturausrüstungen, die Geräte oder Ausrüstungen anbieten, die Kunststoffe enthalten.
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture - Partie 2 : Manuels utilisateur et étiquetage
Le présent document spécifie les exigences relatives aux manuels utilisateur et à l’étiquetage qui accompagnent les engins de pêche et équipements d’aquaculture contenant du plastique et conçus selon les principes de circularité et de recyclabilité, afin d’assurer la traçabilité et une gestion adaptée sur l’ensemble du cycle de vie de leurs composants.
Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 2. del: Priročnik za uporabo in označevanje
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Krožna zasnova ribolovnega orodja in opreme za akvakulturo - 2. del: Priročnik za
uporabo in označevanje
Circular design of fishing gear and aquaculture equipment - Part 2: User manual and
labelling
Kreislaufwirtschaft von Fischfanggeräten und Aquakulturausrüstungen - Teil 2:
Benutzerhandbuch und Kennzeichnung
Circularité et recyclabilité des engins de pêche et des équipements d’aquaculture -
Partie 2 : Manuels utilisateur et étiquetage
Ta slovenski standard je istoveten z: EN 17988-2:2024
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
65.150 Ribolov in ribogojstvo Fishing and fish breeding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17988-2
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 13.020.20; 65.150
English Version
Circular design of fishing gear and aquaculture equipment
- Part 2: User manuals and labelling
Circularité et recyclabilité des engins de pêche et des Kreislaufwirtschaft von Fischfanggeräten und
équipements d'aquaculture - Partie 2 : Manuels Aquakulturausrüstungen - Teil 2: Benutzerhandbuch
utilisateur et étiquetage und Kennzeichnung
This European Standard was approved by CEN on 30 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17988-2:2024 E
worldwide for CEN national Members.
EN 17899-2:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements and guidelines for user manuals. 6
4.1 General. 6
4.1.1 General guidelines based on EN IEC/IEEE 82079-1: 2019 . 6
4.1.2 Specific stakeholder requirements . 6
4.2 Stage of selecting and sourcing of materials and components . 7
4.3 Manufacturing, assembly and installation stage . 8
4.4 Use and maintenance stage . 9
4.4.1 Needs for use of fishing gear and aquaculture equipment . 9
4.4.2 Needs for maintenance and repair operations . 10
4.4.3 Needs for preparation for reuse . 10
4.5 End-of-use stage . 11
4.5.1 Needs for collecting, (pre)sorting and transporting used and/or wasted fishing gear
and aquaculture equipment. 11
4.5.2 Needs for recycling . 12
5 Requirements for labelling . 12
5.1 Placement and implementation of labelling on fishing gear and aquaculture
equipment . 12
5.2 Implementation of labelling systems . 13
5.2.1 General. 13
5.2.2 Requirements for implementation of labelling systems . 14
5.3 Packaging material information . 15
Annex A (Informative) Optional requirements to comply with EN IEC/IEEE 82079-1: 2019
................................................................................................................................................................... 16
Annex B (Informative) Compliance checklist for the optional requirements on the
information for use- EN IEC/IEEE 82079-1: 2019 . 18
Annex C (Informative) Template for the component usage and care . 22
Annex D (Informative) Fishing gear and aquaculture equipment taxonomy code list. 26
Annex E (Informative) Examples of gear labels for identification . 28
Annex F (Informative) Placement of labels in relation to fishing gear or aquaculture
equipment type . 30
Annex G (Informative) Guidance for the labelling of fishing gear and aquaculture equipment
to indicate optional geolocation positions . 31
Bibliography . 32
European foreword
This document (EN 17988-2:2024) has been prepared by Technical Committee CEN/TC 466 “Circularity
and recyclability of fishing gear and aquaculture equipment”, the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn at the latest by May 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission (M/574). The Standing Committee of the EFTA States subsequently approves these requests
for its Member States.
This document is part of the EN 17988 series.
The EN 17988 series consists of the following parts, under the general title Circular design of fishing gear
and aquaculture equipment:
— Part 1: General requirements and guidelines
— Part 2: User manuals and labelling
— Part 3: Technical requirements and guidelines
— Part 4: Environmental and circularity requirements and guidelines
— Part 5: Circular business models
— Part 6: Requirements and guidelines for digitalization of information of components of fishing gear
and aquaculture equipment
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
EN 17899-2:2024 (E)
Introduction
As part of the European Green Deal, launched in 2019, the European Commission introduced measures
to move to a climate neutral and circular economy, together with a digital transition. One of the targets
in the transition to a circular economy was to reduce the amount of waste released into the environment
by decreasing the amount of waste generated, increasing the amount of waste collected and re-
introducing the materials regenerated from waste into the production of new products.
Specifically, the accumulation of plastics in marine and other aquatic environments were addressed in
two directives:
— The revised Port Reception Facilities (PRF) Directive [1] encourages fishers and aquaculturists to
bring not only their own end-of-use gear but also bring ashore abandoned, lost or otherwise
discarded (ALD) fishing gear and aquaculture equipment, thus encouraging waste to be carried back
to port.
— The Single Use Plastics (SUP) Directive [2], which lays down rules concerning different plastic
products, including fishing gear and aquaculture equipment containing plastics, and sets
requirements to the Member States to establish Extended Producer Responsibility (EPR) schemes.
Concerning fishing gear, it also contains rules on minimum national annual collection rates, together
with reporting on fishing gear placed on the market and waste fishing gear collected in ports.
In 2021, the standardization request M/574 on the circular design of fishing gear [3] was passed by the
European Commission and the parliament and accepted by CEN, which forms the basis for this series of
documents (EN 17988 series). While the term ‘fishing gear’ is used predominantly in the SUP Directive
and M/574, both documents encompass aquaculture equipment.
The purpose of this series of documents is to provide stakeholders with requirements, recommendations
and guidelines to address the different aspects of circular design of fishing gear and aquaculture
equipment containing plastics, encourage preparing for reuse and facilitate recyclability at end-of-use.
These requirements are intended to be applied from the design phase across the entire life cycle of the
fishing gear and aquaculture equipment. This includes but is not limited to: manufacturing, use,
maintenance, repair, collection, sorting, preparation for recycling, reuse, remanufacture, disposal, uptake
of recycled content and recycling.
Although this standard is written for fishing gear and aquaculture equipment containing plastics, the
requirements, recommendations and guidelines are also applicable to other materials.
This series of documents does not address other important design criteria such as fishing or farming
efficiency. When implementing the requirements, recommendations and guidelines provided in these
documents, balanced trade-offs between all relevant criteria need to be taken into account.
This series of documents aims to contribute to the following UN Sustainable Development Goals (SDGs)
[4]:
— 9 Industry, innovation, and infrastructure,
— 12 Responsible consumption and production,
— 14 Life below water, in particular target 14.1: ‘By 2025, prevent and significantly reduce marine
pollution of all kinds, in particular from land-based activities, including marine debris and nutrient
pollution.’
For a full outline of the parts of the standard, and how the parts relate to each other, see part 1.
Part 2 specifies the requirements, recommendations and guidelines for user manuals and labelling (and
other information) that accompanies circular designed fishing gear and aquaculture equipment. This will
enable traceability and proper management during the lifetime of fishing gear and aquaculture
equipment.
The aim of part 2 is to provide requirements, recommendations and guidelines for producers
(manufacturers and importers) of fishing gear and aquaculture equipment, netting and raw materials. In
addition, this part can also be relevant for other stakeholders, such as those involved in the end-of-use of
fishing gear and aquaculture equipment. Stakeholders that will need to be provided with user manuals
include fishers, aquaculture companies, collectors (of wasted gear), sorters, those who are doing
maintenance (including washing and cleaning), and distributors. Information that needs to be provided
to authorities can also be covered by user manuals or labelling.
Note to the reader on normative language: In
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.