iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50014:2000

(Main)

Electrical apparatus for potentially explosive atmospheres - General requirements

Electrical apparatus for potentially explosive atmospheres - General requirements

This European Standard specifies the general requirements for construction, testing and marking of electrical apparatus, ex cable entries, ex components intended for use in potentially explosive atmospheres of gas, vapour and mist. Potentially explosive atmospheres include the presence of combustible dusts. Except where otherwise stated in the supplementary standards, this standard and the related standards provide protection in accordance with Category 2 or Category M2. This European Standard is supplemented or modified by the following European Standards concerning the specific types of protection: EN 50015, EN 50016, EN 50017, EN 50018, EN 50019, EN 50020, EN 50028, EN 50033, EN 50039. The above European Standards and this European Standard are not applicable to the construction of electromedical apparatus, shot-firing exploders, test devices for exploders and for shot-firing circuits

Elektrische Betriebsmittel für explosionsgefährdete Bereiche - Allgemeine Bestimmungen

Matériel électrique pour atmosphères explosibles - Règles générales

Električne naprave za potencialno eksplozivne atmosfere - Splošne zahteve

General Information

Status
Withdrawn
Publication Date
31-Aug-2000
Withdrawal Date
31-Jan-2008
ICS
29.260.20 - Electrical apparatus for explosive atmospheres
Technical Committee
EXP - Electrical apparatus for explosive atmospheres
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Jan-2008
Due Date
13-Feb-2008
Completion Date
01-Feb-2008
Directive
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
Mandate
BC/CEN/CLC/08-92 - BC/CEN/CLC/08-92
Ref Project
EN 50014:1997 - Electrical apparatus for potentially explosive atmospheres - General requirements

Relations

Amended By
SIST EN 50014:2000/A1:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
28-Jan-2023
Amended By
SIST EN 50014:2000/A2:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
28-Jan-2023
Replaced By
SIST EN 60079-0:2004 - Electrical apparatus for explosive gas atmospheres -- Part 0: General requirements
Effective Date
29-Jan-2023
Amended By
SIST EN 50014:2000/A1:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
21-Sep-2010
Amended By
SIST EN 50014:2000/A2:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
21-Sep-2010
Replaced By
SIST EN 60079-0:2004 - Electrical apparatus for explosive gas atmospheres -- Part 0: General requirements
Effective Date
07-Jun-2022
Amended By
SIST EN 50014:2000/A1:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
07-Jun-2022
Amended By
SIST EN 50014:2000/A2:2000 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
07-Jun-2022
Replaces
SIST EN 50014:1999 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
01-Jun-2004
Revises
SIST EN 50014:1999 - Electrical apparatus for potentially explosive atmospheres - General requirements
Effective Date
29-Jan-2023

Buy Standard

EN 50014:2000EN 50014:2000
PreviousNext
Standard
EN 50014:2000
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50014:2000
01-september-2000
1DGRPHãþD
SIST EN 50014:1999
(OHNWULþQHQDSUDYH]DSRWHQFLDOQRHNVSOR]LYQHDWPRVIHUH6SORãQH]DKWHYH
Electrical apparatus for potentially explosive atmospheres - General requirements
Elektrische Betriebsmittel für explosionsgefährdete Bereiche - Allgemeine
Bestimmungen
Matériel électrique pour atmosphères explosibles - Règles générales
Ta slovenski standard je istoveten z: EN 50014:1997
ICS:
29.260.20 (OHNWULþQLDSDUDWL]D Electrical apparatus for
HNVSOR]LYQDR]UDþMD explosive atmospheres
SIST EN 50014:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50014:2000

---------------------- Page: 2 ----------------------

SIST EN 50014:2000

---------------------- Page: 3 ----------------------

SIST EN 50014:2000

---------------------- Page: 4 ----------------------

SIST EN 50014:2000

---------------------- Page: 5 ----------------------

SIST EN 50014:2000

---------------------- Page: 6 ----------------------

SIST EN 50014:2000

---------------------- Page: 7 ----------------------

SIST EN 50014:2000

---------------------- Page: 8 ----------------------

SIST EN 50014:2000

---------------------- Page: 9 ----------------------

SIST EN 50014:2000

---------------------- Page: 10 ----------------------

SIST EN 50014:2000

---------------------- Page: 11 ----------------------

SIST EN 50014:2000

---------------------- Page: 12 ----------------------

SIST EN 50014:2000

---------------------- Page: 13 ----------------------

SIST EN 50014:2000

---------------------- Page: 14 ----------------------

SIST EN 50014:2000

---------------------- Page: 15 ----------------------

SIST EN 50014:2000

---------------------- Page: 16 ----------------------

SIST EN 50014:2000

---------------------- Page: 17 ----------------------

SIST EN 50014:2000

---------------------- Page: 18 ----------------------

SIST EN 50014:2000

---------------------- Page: 19 ----------------------

SIST EN 50014:2000

---------------------- Page: 20 ----------------------

SIST EN 50014:2000

---------------------- Page: 21 ----------------------

SIST EN 50014:2000

---------------------- Page: 22 ----------------------

SIST EN 50014:2000

---------------------- Page: 23 ----------------------

SIST EN 50014:2000

---------------------- Page: 24 ----------------------

SIST EN 50014:2000

---------------------- Page: 25 ----------------------

SIST EN 50014:2000

---------------------- Page: 26 ----------------------

SIST EN 50014:2000

---------------------- Page: 27 ----------------------

SIST EN 50014:2000

---------------------- Page: 28 ----------------------

SIST EN 50014:2000

---------------------- Page: 29 ----------------------

SIST EN 50014:2000

---------------------- Page: 30 ----------------------

SIST EN 50014:2000

---------------------- Page: 31 ----------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50104:2020/A1:2023(Amendment)
Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
EN 50104:2019/A1:2023

This document specifies general requirements for design, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the measurement of the oxygen concentration in gas mixtures indicating up to 25 % (v/v).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022/AC:2023(Corrigendum)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020/COR2:2022)
EN IEC 60079-25:2022/AC:2022-12

IEC Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62990-1:2023/A11:2023(Amendment)
Workplace Atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
EN IEC 62990-1:2022/A11:2022

This part of IEC 62990 specifies general requirements for design, function and performance, and describes the test methods that apply to portable, transportable, and fixed equipment for the detection and concentration measurement of toxic gases and vapours in workplace atmospheres and other industrial and commercial applications. This document is applicable to continuously sensing equipment whose primary purpose is to provide an indication, alarm and/or other output function the purpose of which is to indicate the presence of a toxic gas or vapour in the atmosphere and in some cases to initiate automatic or manual protective action(s). It is applicable to equipment in which the sensor generates an electrical signal when gas is present.
This document applies to two types of equipment:
• Type HM (Health Monitoring) ‘occupational exposure’ equipment: For occupational exposure measurement, the performance requirements are focused on uncertainty of measurement of gas concentrations in the region of Occupational Exposure Limit Values (OELV). The upper limit of measurement will be defined by the manufacturer in accordance with 4.2.1.
• Type SM (Safety Monitoring) ‘general gas detection’ equipment: For general gas detection applications (e.g. safety warning, leak detection), the performance requirements are focused on alarm signalling. The upper limit of measurement will be defined by the manufacturer according to the intended use of the equipment. In general, the requirements for accuracy will be higher for Type HM equipment than for Type SM equipment. The same equipment may meet the requirements of both Type HM and Type SM. For equipment used for sensing the presence of multiple gases this document applies only to the detection of toxic gas or vapour.
This document is not applicable to equipment:
- with samplers and concentrators such as sorbents or paper tape having an irreversible indication;
- used for the measurement of gases and vapours related to the risk of explosion;
- used for the measurement of oxygen; – used only in laboratories for analysis or measurement;
- used only for process measurement purposes;
- used in the domestic environment;
- used in environmental air pollution monitoring;
- used for open-path (line of sight) area gas measurement;
- used for ventilation control in car parks or tunnels.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-25:2022(Main)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems (IEC 60079-25:2020 + COR1:2020)
EN IEC 60079-25:2022

This part of IEC 60079 contains the specific requirements for design, construction and
assessment of intrinsically safe systems, Type of Protection “i”, intended for use, as a whole or
in part, in locations in which the use of Group I, II or III Ex Equipment is required.
NOTE 1 This standard is intended for use by the designer of the system e.g. a person who could be a manufacturer,
a specialist consultant or a member of the end-user’s staff.
This document supplements and modifies the general requirements of IEC 60079-0 and the
intrinsic safety standard IEC 60079-11. Where a requirement of this standard conflicts with a
requirement of IEC 60079-0 or IEC 60079-11, the requirement of this standard takes
precedence.
The installation requirements of Group II or Group III systems designed in accordance with this
standard are specified in IEC 60079-14.
NOTE 2 Group I installation requirements are presently not provided in IEC 60079-14. Installation requirements for
Group I are being considered.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-29-1:2017/A1:2022(Amendment)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016/A1:2020)
EN 60079-29-1:2016/A1:2022

NEXT ACTION: TB ACTION BY 2020-01-31 (prep doc for BT meeting - Feb2021)
BT CONSULTATION FAILED (addition of Annex ZZ) ON 2020-11-10
HAS CONSULTANT ASSESSMENT BY 2020-09-24 (PUB assessment) - Compliant assessment on 2020-09-22
2020-04-8 mah: Consultant assessment at FV missing, Annex ZZ did not go to FV.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-29-1:2017/A11:2022(Amendment)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A11:2022

EN 60079-29-1 specifies general requirements for construction, testing and performance, and describes the test methods that apply to portable, transportable and fixed equipment for the detection and measurement of flammable gas or vapour concentrations with air. The equipment, or parts thereof, is intended for use in explosive atmospheres and in mines susceptible to firedamp.
EN 60079-29-1 is applicable to flammable gas detection equipment with a measuring range up to any volume fraction as declared by the manufacturer, and which is intended to provide an indication, alarm or other output function; the purpose of which is to indicate a potential explosion hazard and in some cases, to initiate automatic or manual protective action(s).

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-426:2022(Main)
International Electrotechnical Vocabulary (IEV) - Part 426: Explosive atmospheres
IEC 60050-426:2020

IEC 60050-426:2020 gives terms specifically relevant to explosive atmospheres. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    443 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    430 pages
    English and French language
    sale 15% off
SIST
SIST-TS CLC IEC/TS 60079-47:2021(Main)
Explosive atmospheres - Part 47: Equipment protection by 2-wire intrinsically safe Ethernet concept (2-WISE)
CLC IEC/TS 60079-47:2021

This part of IEC 60079, which is a technical specification, specifies requirements for the construction, marking, and documenting of apparatus, systems and installations for use with the 2-Wire Intrinsically Safe Ethernet concept (2-WISE). The physical layer specification for 2-wire Ethernet 10BASE-T1L is defined in IEEE 802.3cg
2-WISE is the 2-Wire Intrinsically Safe Ethernet concept for advance physical layer (APL), designed to simplify the examination process for components and cable Entity Parameters within APL segments. This is achieved by defining universal Entity Parameter limits for APL ports, according to location and type of hazardous atmosphere, and listing a concise set of rules for the segment setup.
The requirements for construction and installation of 2-WISE apparatus and systems are included in IEC 60079-11, IEC 60079-14, and IEC 60079-25, except as modified by this technical specification. Parts of a 2-WISE apparatus may be protected by any Type of Protection listed in IEC 60079-0 appropriate to the EPL for the intended use. In these circumstances, the requirements of this technical specification apply only to intrinsically safe circuits of the apparatus.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 60079-43:2021(Main)
Explosive atmospheres - Part 43: Equipment in adverse service conditions (IEC/TS 60079-43:2017)
CLC IEC/TS 60079-43:2021

This part of IEC 60079, which is a Technical Specification, provides guidance for equipment for use in explosive atmospheres in environments which may include ambient temperatures below –20 °С, and additional adverse conditions, including maritime applications.
The purpose of this document is to provide recommendations to be considered for the design, manufacture and use of equipment. It is intended that this document be used for equipment operating within the environmental range specified on the certificate for the equipment.

  • Technical specification
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC IEC/TS 60079-39:2020/AC:2021(Corrigendum)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation (IEC/TS 60079-39:2015/COR1:2020)
CLC IEC/TS 60079-39:2019/AC:2020-12

IEC - adopted // Corrigenda

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day