Passive Filter Units For Electromagnetic Interference Suppression - Part 3: Standard for passive filter units for which safety tests are appropriate

This specification covers passive filters used to attenuate unwanted radio-frequency signals
(such as noise or interference) generated from electromagnetic sources.
Both single and multi-channel filters within one enclosure or which are built on a printed
circuit board forming a compact entity are included within the scope of this specification.
Filters constructed of capacitive elements where the inductance is inherent in the construction
of the filter are within the scope of this specification. Similarly, filters constructed of inductive
elements where the capacitance is inherent in the construction of the filter are also within the
scope of this specification. It is up to the manufacturer to state whether a given component is
to be designed as a capacitor, an inductor or a filter. Filters can include also other
components like resistors and/or varistors or similar components
This specification applies to passive filter units for electromagnetic interference suppression
for which safety tests are appropriate. This implies that filters specified according to this
specification will either be connected to mains supplies, when compliance with the mandatory
tests of Table 3 is necessary, or used in other circuit positions where the equipment
specification prescribes that some or all of these safety tests are required.
This specification applies to passive filter units, which will be connected to an a.c. mains or
other supply (d.c. or a.c.) with a nominal voltage not exceeding 1 000 V a.c., with a nominal
frequency not exceeding 400 Hz, or 1 500 V d.c.
NOTE For a.c. use, IEC 60384-14 applies to capacitors which will be connected to a.c. mains with a nominal
frequency not exceeding 100 Hz.
This specification covers appliance filters (US) but does not cover facility filters, cordconnected
filters or direct plug-in filters. These other filters will be covered by another
sectional specification.

Passive Filter für die Unterdrückung von elektromagnetischen Störungen - Teil 3: Filter, für die Sicherheitsprüfungen vorgeschrieben sind

Filtres passifs d’antiparasitage – Partie 3: Norme pour filtres passifs pour lesquels des essais de sécurité sont appropriés

L'IEC 60939-3:2015 couvre les filtres passifs utilisés pour atténuer les signaux aux fréquences radioélectriques indésirables (par exemple le bruit ou le brouillage) générés par des sources électromagnétiques. Les filtres à voie unique et à voies multiples à l'intérieur d'une enveloppe, ou montés sur une carte de circuit imprimé formant une entité compacte, font partie du domaine d'application de la présente spécification. La présente spécification s'applique aux filtres passifs d'antiparasitage pour lesquels des essais de sécurité sont appropriés. Ceci implique que les filtres spécifiés conformément à la présente spécification seront, soit connectés à des réseaux d'alimentation, lorsque la conformité avec les essais obligatoires du Tableau 3 est nécessaire, soit utilisés dans d'autres positions de circuit où la spécification du matériel prescrit que certains ou tous ces essais de sécurité sont exigés. La présente spécification s'applique à des filtres passifs qui seront connectés à un réseau d'alimentation en courant alternatif ou à une autre alimentation (en courant continu ou en courant alternatif) dont la tension nominale ne dépasse pas 1 000 V en courant alternatif et dont la fréquence nominale ne dépasse pas 400 Hz, ou dont la tension nominale ne dépasse pas 1 500 V en courant continu.

Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Standard za pasivne filtre, za katere varnostni preskusi ustrezajo

Specifikacija zajema pasivne filtre za slabenje neželenih radiofrekvenčnih signalov (kot so šum ali motnje), ki jih ustvarijo elektromagnetni viri. Ta specifikacija zajema tako enokanalne kot tudi večkanalne filtre v enem ohišju ali filtre, nameščene na tiskanem vezju, ki tvorijo kompaktno entiteto. Filtri, zgrajeni iz kapacitivnih elementov, pri katerih zgradba filtra zagotavlja induktivnost, so vključeni v obseg te specifikacije. Podobno so v obseg te specifikacije vključeni tudi filtri, zgrajeni iz induktivnih elementov, pri katerih zgradba filtra zagotavlja kapacitivnost. Proizvajalec se sam odloči, ali želi dano komponento označiti kot kondenzator, induktor ali filter. V filtre je mogoče vključiti tudi druge komponente, kot so upori in/ali varistorji ali podobne komponente. Ta specifikacija se uporablja za pasivne filtre za dušenje elektromagnetnih motenj, ki so podvrženi varnostnim preskusom. To pomeni, da se filtri, določeni v skladu s to specifikacijo, priključijo na omrežno napajanje, kadar je zahtevana skladnost z obveznimi preskusi iz preglednice 3, ali se uporabijo na drugih mestih v tokokrogu, za katera specifikacija opreme predpisuje, da so zahtevani nekateri ali vsi ti varnostni preskusi. Ta specifikacija se uporablja za pasivne filtre, ki se priključijo na izmenično omrežno napajanje ali
drugo vrsto napajanja (enosmerno ali izmenično) z nazivno izmenično napetostjo, manjšo od 1000 V, in nazivno frekvenco, manjšo od 400 Hz, ali nazivno enosmerno napetostjo, manjšo od 1500 V. OPOMBA: Pri uporabi z izmenično napetostjo se standard IEC 60384-14 uporablja za kondenzatorje, ki se priključijo na izmenično omrežno napajanje z nazivno frekvenco, manjšo od 100 Hz.
Ta specifikacija zajema filtre za naprave (US), vendar ne zajema filtrov za sisteme, filtrov, priključenih s kablom, ali filtrov za neposredno priključitev. Ti filtri bodo obravnavani v drugi področni specifikaciji.

General Information

Status
Published
Publication Date
16-Feb-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Nov-2015
Due Date
31-Jan-2016
Completion Date
17-Feb-2016

Relations

Buy Standard

Standard
EN 60939-3:2016
English language
78 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60939-3:2016
01-marec-2016
Pasivni filtri za dušenje elektromagnetnega motenja - 3. del: Standard za pasivne
filtre, za katere varnostni preskusi ustrezajo
Passive Filter Units For Electromagnetic Interference Suppression - Part 3: Standard for
passive filter units for which safety tests are appropriate
Filtres passifs d’antiparasitage – Partie 3: Norme pour filtres passifs pour lesquels des
essais de sécurité sont appropriés
Ta slovenski standard je istoveten z: EN 60939-3:2015
ICS:
31.160 (OHNWULþQLILOWUL Electric filters
SIST EN 60939-3:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60939-3:2016

---------------------- Page: 2 ----------------------

SIST EN 60939-3:2016


EUROPEAN STANDARD EN 60939-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2015
ICS 31.160

English Version
Passive filter units for electromagnetic interference suppression -
Part 3: Passive filter units for which safety tests are appropriate
(IEC 60939-3:2015)
Filtres passifs d'antiparasitage - Partie 3: Filtres passifs Passive Filter für die Unterdrückung von
pour lesquels des essais de sécurité sont appropriés elektromagnetischen Störungen - Teil 3: Filter, für die
(IEC 60939-3:2015) Sicherheitsprüfungen vorgeschrieben sind
(IEC 60939-3:2015)
This European Standard was approved by CENELEC on 2015-09-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60939-3:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60939-3:2016
EN 60939-3:2015
European foreword
The text of document 40/2387/FDIS, future edition 1 of IEC 60939-3, prepared by IEC/TC 40
"Capacitors and resistors for electronic equipment" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as EN 60939-3:2015.
The following dates are fixed:
(dop) 2016-06-16
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2018-09-16
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60939-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60068-2-13 NOTE Harmonized as EN 60068-2-13.
IEC 60068-2-27 NOTE Harmonized as EN 60068-2-27.
IEC 60085 NOTE Harmonized as EN 60085.
IEC 60335-1 NOTE Harmonized as EN 60335-1.
IEC 60384-9 NOTE Harmonized as EN 60384-9.
IEC 60947-1 NOTE Harmonized as EN 60947-1.
IEC 60990 NOTE Harmonized as EN 60990.
IEC 61112 NOTE Harmonized as EN 61112.
IEC 62109-1 NOTE Harmonized as EN 62109-1.
2

---------------------- Page: 4 ----------------------

SIST EN 60939-3:2016
EN 60939-3:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.