Fixed firefighting systems — Automatic sprinkler systems — Design, assembly, installation and commissioning of pump sets

This document specifies design, assembly, installation and commissioning requirements for pump sets for use in sprinkler systems conforming to EN 12845. Where applicable, this standard can also be used for pump sets for other water based fixed firefighting systems.

Ortsfeste Brandbekämpfungsanlagen - Automatische Sprinkleranlagen - Projektierung, Zusammenstellung, Montage und Inbetriebnahme von Pumpenaggregaten

Dieses Dokument legt Anforderungen an die Konstruktion, Zusammenstellung, Montage und Inbetriebnahme von Pumpenaggregaten für die Verwendung in Sprinkleranlagen nach EN12845(alleTeile) fest.
Gegebenenfalls kann diese Norm auch für Pumpenaggregate für andere wasserbasierte ortsfeste Brand- bekämpfungsanlagen angewendet werden.

Installations fixes de lutte contre l’incendie - Systèmes d’extinction automatique de type sprinkleur - Conception, assemblage, installation et mise en service des groupes motopompes

Le présent document spécifie les exigences relatives à la conception, à l’assemblage, à l’installation et à la mise en service des groupes motopompes utilisés dans les systèmes d’extinction de type sprinkleur conformes à l’EN 12845 (toutes les parties).
Le cas échéant, la présente norme peut aussi être utilisée pour les groupes motopompes d’autres systèmes fixes d’extinction à base d’eau.

Vgrajene naprave za gašenje - Avtomatski sprinklerski sistemi - Projektiranje, montaža, vgradnja in preverjanje črpalk

General Information

Status
Not Published
Public Enquiry End Date
30-Dec-2022
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
04-Apr-2024
Due Date
09-Apr-2024
Completion Date
04-Apr-2024

Buy Standard

Draft
prEN 17451:2022
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17451:2022
01-december-2022
Vgrajene naprave za gašenje - Avtomatski sprinklerski sistemi - Projektiranje,
montaža, vgradnja in preverjanje črpalk
Fixed firefighting systems — Automatic sprinkler systems — Design, assembly,
installation and commissioning of pump sets
Ortsfeste Brandbekämpfungsanlagen - Automatische Sprinkleranlagen - Projektierung,
Zusammenstellung, Montage und Inbetriebnahme von Pumpenaggregaten
Installations fixes de lutte contre l’incendie - Systèmes d’extinction automatique de type
sprinkleur - Conception, assemblage, installation et mise en service des groupes
motopompes
Ta slovenski standard je istoveten z: prEN 17451
ICS:
13.220.10 Gašenje požara Fire-fighting
oSIST prEN 17451:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17451:2022

---------------------- Page: 2 ----------------------
oSIST prEN 17451:2022


DRAFT
EUROPEAN STANDARD
prEN 17451
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2022
ICS 13.220.20
English Version

Fixed firefighting systems - Automatic sprinkler systems -
Design, assembly, installation and commissioning of pump
sets
Installations fixes de lutte contre l'incendie - Systèmes Ortsfeste Brandbekämpfungsanlagen - Automatische
d'extinction automatique de type sprinkleur - Sprinkleranlagen - Projektierung, Zusammenstellung,
Conception, assemblage, installation et mise en service Montage und Inbetriebnahme von Pumpenaggregaten
des groupes motopompes
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17451:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17451:2022
prEN 17451:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Symbols and abbreviated terms . 9
4 Performance of pump set . 9
4.1 General design principles . 9
4.2 Components .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.