SIST EN 50110-2:2010
(Main)Operation of electrical installations - Part 2: National annexes
Operation of electrical installations - Part 2: National annexes
The European Standard EN 50110 consists of two parts:
- the first part EN 50110-1 contains minimum requirements valid for all CENELEC countries and some additional informative annexes dealing with safe working;
- the second part EN 50110-2 is a set of normative annexes (one per country) which specify either the present safety requirements or give the national supplements to these minimum requirements at the time when this European Standard was prepared.
Betrieb von elektrischen Anlagen - Teil 2: Nationale Anhänge
Exploitation des installations électriques - Partie 2: Annexes nationales
Obratovanje električnih postrojev - 2. del: Nacionalni dodatki
Evropski standard EN 50110 je sestavljen iz dveh delov:
- prvi del, EN 50110-1, vsebuje minimalne zahteve, ki veljajo za vse države CENELEC, in nekatere dodatne informativne dodatke, ki obravnavajo varno delo;
- drugi del, EN 50110-2, je nabor normativnih dodatkov (po en na državo), ki bodisi določajo trenutne varnostne zahteve bodisi podajajo nacionalne dodatke k tem minimalnim zahtevam, ki so veljali v času priprave tega evropskega standarda.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Betrieb von elektrischen Anlagen - Teil 2: Nationale AnhängeExploitation des installations électriques - Partie 2: Annexes nationalesOperation of electrical installations - Part 2: National annexes29.240.01Power transmission and distribution networks in generalICS:Ta slovenski standard je istoveten z:EN 50110-2:2010SIST EN 50110-2:2010en01-maj-2010SIST EN 50110-2:2010SLOVENSKI
STANDARDSIST EN 50110-2:19991DGRPHãþD
SIST EN 50110-2:2010
EUROPEAN STANDARD EN 50110-2 NORME EUROPÉENNE
EUROPÄISCHE NORM March 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50110-2:2010 E
ICS 29.240.00 Supersedes EN 50110-2:1996
English version
Operation of electrical installations -
Part 2: National annexes
Exploitation des installations électriques - Partie 2: Annexes nationales
Betrieb von elektrischen Anlagen -
Teil 2: Nationale Anhänge
This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 50110-2:2010
EN 50110-2:2010 - 2 - Foreword This European Standard was prepared by the CENELEC BTTF 62-3, Operation of electrical installations. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50110-2 on 2010-03-01. This European Standard supersedes EN 50110-2:1996. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2011-03-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2013-03-01
__________
SIST EN 50110-2:2010
- 3 - EN 50110-2:2010 Contents 1 Austria (AT) . 5 2 Belgium (BE) . 5 3 Bulgaria (BG) . 6 4 Cyprus (CY) . 6 5 Czech Republic (CZ) . 6 6 Denmark (DK) . 8 7 Estonia (EE) . 8 8 Finland (FI) . 9 9 France (FR). 9 10 Germany (DE) . 10 11 Greece (GR) . 12 12 Hungary (HU) . 13 13 Iceland (IS) . 13 14 Ireland (IE) . 13 15 Italy (IT) . 14 16 Latvia (LV) . 14 17 Lithuania (LT) . 14 18 Luxembourg (LU) . 14 19 Malta (MT) . 15 20 Netherlands (NL) . 15 21 Norway (NO) . 15 22 Poland (PL) . 16 23 Portugal (PT). 17 24 Romania (RO) . 17 25 Slovakia (SK) . 18 26 Slovenia (SI) . 20 27 Spain (ES) . 20 28 Sweden (SE) . 21 29 Switzerland (CH) . 22 30 United Kingdom (GB) . 22
SIST EN 50110-2:2010
EN 50110-2:2010 - 4 - Introduction
The European Standard EN 50110 consists of two parts: - the first part EN 50110-1 contains minimum requirements valid for all CENELEC countries and some additional informative annexes dealing with safe working; - the second part EN 50110-2 is a set of normative annexes (one per country) which specify either the present safety requirements or give the national supplements to these minimum requirements at the time when this European Standard was prepared.
The national annexes (if any) are summarized by the respective member country.
National Committees shall notify CENELEC of any changes needed to their national annex.
SIST EN 50110-2:2010
- 5 - EN 50110-2:2010 1 Austria (AT)
1.1 Laws and regulations 1.1.1 13. Verordnung des Bundesministers für Wirtschaft und Arbeit, mit der die Verordnung über den Nachweis der Fachkenntnisse (Fachkenntnisnachweis-Verordnung – FK-V) erlassen wird sowie die Verordnung über den Nachweis der Fachkenntnisse für die Vorbereitung und Organisation von bühnentechnischen und beleuchtungstechnischen Arbeiten, die Verordnung über die Fachausbildung der Sicherheitsfachkräfte und die Besonderheiten im untertägigen Bergbau, die Bauarbeiterschutzverordnung, die Druckluft- und Taucherarbeitenverordnung, die Verordnung über den Schutz der Dienstnehmer und der Nachbarschaft beim Betrieb von Steinbrüchen, Lehm-, Ton-, Sand- und Kiesgruben sowie bei Haldenabtragungen und die Sprengarbeitenverordnung geändert werden (BGBl. II Nr. 13/2007). This regulation provides instruction to personnel who have to prepare and organize specific live working procedures for voltages exceeding 1 kV (BGBl. 10/1982).
1.2 Standards 1.2.1 ÖVE/ÖNORM
EN 50110-1 + EN 50110-2-100 (integrated paper) 1.2.2 Betrieb von elektrischen Anlagen Operation of electrical installations
Teil 1: Europäische Norm
Part 1: European standard
Teil 2: Nationale Ergänzungen
Part 2-100: National annexes Part 2-100 is more detailed than EN 50110-1. Under the
Electrotechnic-Law this standard is compulsory for work in Austria.
2 Belgium (BE)
2.1 Laws and regulations 2.1.1 AREI = Algemeen Reglement op de Elektrische Installaties
RGIE = Règlement Général sur les Installations Electriques
General regulation on electrical installations, published in the official Journal of Belgium on 29th April 1981, modified and supplemented by various Royal and Ministerial Decrees of the Federal Public Service Economy, SMEs, Self-Employed and Energy. (More in particular art. 266).
2.1.2 ARAB = Algemeen Reglement voor de Arbeidsbescherming
RGPT = Règlement Général pour la Protection du Travail
General regulation for safety at work, based on the National Law concerning the health and safety of the employees, also the salubrity of the work and the workplace, published in the Official Journal of Belgium of 19th June 1952, modified and supplemented by various Royal and Ministerial Decrees of the Federal Public Service Employment, Labour and Social Dialogue.
2.1.3 Regels van Goed Vakmanschap en Technische Voorschriften
Règles de l'Art et Prescriptions Techniques
Rules of good professional skills and technical prescriptions edited by Synergrid, the federation of system operators in Belgium (former BFE-FPE = Belgian Association of Producers and Distributors of Electricity / CETS - Comité voor Technische Studie der Produktie en Distributie van Elektriciteit in België/Comité d'Etudes Techniques de la Production et de la Distribution d'Electricité en Belgique).
SIST EN 50110-2:2010
EN 50110-2:2010 - 6 - 3 Bulgaria (BG)
- No national annex -
4 Cyprus (CY)
- No national annex -
5 Czech Republic (CZ)
5.1 Laws and regulations 5.1.1 Zákon č. 262/2006 Sb., zákoník práce, Část pátá, paragrafy 101 – 108 Act No. 262/2006 Coll., Labour Code, Part five, Sections 101 – 108 5.1.2 Zákon č. 458/2000 Sb., o podmínkách podnikání a o výkonu státní správy v energetických odvtvích a o zmn nkterých zákon$ (energetický zákon), ve znní pozdjších pedpis$ Act No. 458/2000 Coll., on the conditions for entrepreneurial activities and the performance of state administration in energy industries and on an amendment to certain acts (“Energy Act”), as amended by later legislative acts and regulations 5.1.3 Zákon č. 251/2005 Sb. o inspekci práce Act No. 251/2005 Coll., on labour inspection 5.1.4 Zákon č. 174/1968 Sb., o státním odborném dozoru nad bezpečností práce, ve znní pozdjších pedpis$ Act No. 174/1968 Coll., on state professional supervision of the labour safety as amended by later legislative acts and regulations 5.1.5 Zákon č. 309/2006 Sb., kterým se upravují další požadavky bezpečnosti a
ochrany zdraví pi práci v pracovn právních vztazích a o zajištní bezpečnosti a ochrany zdraví pi činnosti nebo poskytování služeb mimo pracovn právní vztahy (zákon o zajištní dalších podmínek bezpečnosti a ochrany zdraví pi práci) Act No. 309/2006 Coll., concerning additional requirements for safety and health protection at employment relations and for safety and health protection at work or service trades out of employment relations 5.1.6 Zákon č. 179/2006 Sb., o ovování a uznávání výsledk$ dalšího vzdlávání a o zmn nkterých zákon$ (zákon o uznávání výsledk$ dalšího vzdlávání), ve znní pozdjších pedpis$ Act No. 179/2006 Coll., on the recognition of results of further education as amended by later legislative acts and regulations 5.1.7 Naízení vlády č. 378/2001 Sb., kterým se stanoví bližší požadavky na bezpečný provoz a používání stroj$, technických zaízení, pístroj$ a náadí Governmental Order No. 378/200 Coll., specifies the detailed requirements for the safe operation and use of machines, technological equipment, devices and tools 5.1.8 Naízení vlády č. 21/2003 Sb., kterým se stanoví technické požadavky na osobní ochranné prostedky Governmental Order No. 21/2003 Coll., whereby with stipulates technical demand on personal preventative 5.1.9 Naízení vlády č. 101/2005 Sb., o podrobnjších požadavcích na pracovišt a pracovní prostedí
Governmental Order No. 101/2005 Coll., includes detailed requirements for workplaces and working environments. SIST EN 50110-2:2010
- 7 - EN 50110-2:2010 5.1.10 Naízení vlády č. 362/2005 Sb., o bližších požadavcích na bezpečnost a ochranu zdraví pi práci na pracovištích s nebezpečím pádu z výšky nebo do hloubky Governmental Order No. 362/2005 Coll., includes the requirements for safety and health protection at work or workplaces where there is a danger of falls from height 5.1.11 Naízení vlády č. 591/2006 Sb., o bližších minimálních požadavcích na bezpečnost a ochranu zdraví pi práci na staveništích
Governmental Order No. 591/2006 Coll., includes the minimum requirements for safety and health protection at work on construction sites 5.1.12 Vyhláška č. 50/1978 Sb., o odborné zp$sobilosti v elektrotechnice Decree No. 50/1978 Coll., this decree specifies the professional qualifications in electrical engineering 5.1.13 Vyhláška č. 20/1979 Sb., kterou se určují vyhrazená elektrická zaízení a stanoví nkteré podmínky k zajištní jejich bezpečnosti, ve znní pozdjších pedpis$ Decree No. 20/1979 Coll., this decree specifies reserved electrical equipment and lays down certain conditions for ensuring the safety thereof as amended by later legislative acts and regulations 5.1.14 Vyhláška č. 48/1982 Sb., kterou se stanoví základní požadavky k zajištní bezpečnosti práce a technických zaízení Decree No. 48/1982 Coll., this decree specifies the essential requirements to ensure safe working and safe functioning of technological equipment 5.1.15 Vyhláška Českého báského úadu č. 22/1989 Sb. ze dne 29. prosince 1988, o bezpečnosti a ochran zdraví pi práci a bezpečnosti provozu pi hornické činnosti a pi dobývání nevyhrazených nerost$ v podzemí,
Část osmá: Elektrická a strojní zaízení, Díl druhý: Elektrická zaízení Decree of the Czech Mining Authority No. 22/1989 Coll., on safety and protection of health and operational safety in mining activities and in activities carried out by mining methods underground 5.1.16 Vyhláška Českého báského úadu č. 26/1989 Sb. ze dne 29. prosince 1988, o bezpečnosti a ochran zdraví pi práci a bezpečnosti provozu pi hornické činnosti a pi činnosti provádné hornickým zp$sobem na povrchu Část šestá: Elektrická a strojní zaízení, Díl druhý: Elektrická zaízení Decree of the Czech Mining Authority No. 26/1989 Coll., on safety and protection of health and operational safety in mining activities and in activities carried out by open-cut mining methods 5.1.17 Vyhláška Českého báského úadu č. 51/1989 Sb. ze dne 29. prosince 1988, o bezpečnosti a ochran zdraví pi práci a bezpečnosti provozu pi úprav a zušlech"ování nerost$ Díl druhý: Elektrická zaízení Decree of the Czech Mining Authority No. 51/1989 Coll., this decree specifies the requirements for the protection of health and operational safety in dressing and enrichment of minerals 5.1.18 Vyhláška Českého báského úadu č. 202/1995 Sb. ze dne 11. srpna 1995, o požadavcích k zajištní bezpečnosti a ochrany zdraví pi obsluze a práci na elektrických zaízeních pi hornické činnosti a pi činnosti provádné hornickým zp$sobem Decree of the Czech Mining Authority No. 202/1995 Coll., this decree specifies the requirements to ensure the safety and protection of health in the operation of electrical installations during mining activities 5.1.19 Vyhláška Českého báského úadu č. 74/2002 Sb. ze dne 22. ledna 2002, o vyhrazených elektrických zaízeních Decree of the Czech Mining Authority No. 74/2002 Coll., on reserved electrical equipment SIST EN 50110-2:2010
EN 50110-2:2010 - 8 - 5.1.20 Vyhláška Českého báského úadu č. 75/2002 Sb. ze dne 22. ledna 2002, o bezpečnosti provozu elektrických technických zaízení používaných pi hornické činnosti a činnosti provádné hornickým zp$sobem Decree of the Czech Mining Authority No. 75/2002 Coll., this decree specifies the requirements to ensure the safe operation of electrical and technological equipment employed in mining activities.
5.2 Standards 5.2.1 ČSN 33 1310
Bezpečnostní pedpisy pro elektrická zaízení určená k užívání osobami bez elektrotechnické kvalifikace This standard specifies the safety regulations for electrical equipment intended to be used by persons without any electrical engineering qualifications 5.2.2 ČSN 33 1326
Bezpečnostní pedpisy pro obsluhu zaízení trakčního vedení a pro práci na trakčním vedení metra This standard specifies the safety regulations for work activities and electrical operations involving underground electric traction systems. 5.2.3 ČSN 33 1500
Revize elektrických zaízení This standard specifies the Inspection and testing requirements for electrical installations 5.2.4 ČSN 33 2000-6
Elektrické instalace nízkého naptí. Část 6: Revize Low voltage electrical installations. Part 6: Verification
6 Denmark (DK)
6.1 Laws and regulations 6.1.1 Lovbekendtgørelse nr. 990 af 08/12/2003 - Bekendtgørelse af lov om elektriske stærkstrømsanlæg og elektrisk materiel. The Heavy Current Act. 6.1.2 Stærkstrømsbekendtgørelsen, Afsnit 6, Elektriske installationer, kapitel 62 og 63. These regulations specify the requirements for the operation and maintenance of low-voltage electrical installations as well as the requirements for work on or near low voltage electrical installations. 6.1.3 Stærkstrømsbekendtgørelsen, Afsnit 5: Drift af elforsyningsanlæg. These regulations specify the requirements for the generation, transmission and distribution of low-voltage and high-voltage electricity. These regulations also include the requirements for inspection, operation, maintenance and work on or near such electrical installations.
7 Estonia (EE)
7.1 Laws and regulations 7.1.1 Elektriohutusseadus (RT I 2007, 12, 64).
Electrical Safety Act (RT I 2007, 12, 64). These regulations specify the general requirements for electrical installations, electrical equipment, electrical work and inspections.
Published in the Official Journal of Estonia (State Gazette) of 24th January 2007 and entered into force 20th July 2007, supplemented by various Ministry of Economic Affairs decrees. SIST EN 50110-2:2010
- 9 - EN 50110-2:2010 7.1.2 Töötervishoiu ja tööohutuse seadus (RT I 1999, 60, 616)
Occupational Health and Safety Act (RT I 1999, 60, 616) The general requirements for health and safety at work. Published in the Official Journal of Estonia (State Gazette) of 16th June 1999 and entered into force 26th July 1999, supplemented by various Government Republic and Ministry of Social Affairs decrees.
8 Finland (FI)
8.1 Laws and regulations 8.1.1 Työturvallisuuslaki Occupational Safety and Health Act (738/2002 with modifications) This Law contains the basic requirements for occupational health and safety and responsibilities at workplaces.
8.1.2 Sähköturvallisuuslaki Electrical safety act (410/1996 with modifications)
This Law contains the
basic requirements for electrical safety.
8.1.3 Sähköturvallisuusasetus Electrical Safety Decree (498/1996 with modifications)
8.1.4 Kauppa- ja Teollisuusministeriön päätös sähköalan töistä
Decision of the Ministry of Trade and Industry on Electrical Works (516/1996 with modifications)
8.1.5 Kauppa- ja teollisuusministeriön päätös sähkölaitteistojen käyttöönotosta ja käytöstä,
Decision of the ministry of trade and industry on commissioning and use of electrical
installations (517/1996 with modifications)
8.1.6 TUKES-ohje S10 Sähkölaitteistojen turvallisuutta ja sähkötyöturvallisuutta koskevat
standardit
TUKES instruction letter S10 Standards referring to Safety of Electrical Installations and Safety at
Electrical Work.
8.2 Standards 8.2.1 SFS 6002: 2005 Sähkötyöturvallisuus/Safety at electrical work This Finnish standard contains EN 50110-1 and additional Finnish national requirements .
9 France (FR)
9.1 Laws and regulations 9.1.1 Décret n° 88-1056 du 14 novembre 1988 pris pour l’exécution des dispositions du livre II du code du travail (titre III : hygiène, sécurité et conditions de travail) en ce qui concerne la protection des travailleurs dans les établissements qui mettent en œuvre des courants électriques. Statutory regulation for the protection of workers in premises that utilises electrical currents This decree is restricted to installations belonging to industrial, commercial or household installations. In this decree, the dead working procedure is the preferred method of working on the electrical installations. 9.1.2 Décret n° 82-167 du 16 février 1982 relatif aux mesures particulières destinées à assurer la sécurité des travailleurs contre les dangers d’origine électrique lors des travaux de construction, d’exploitation et d’entretien des ouvrages de distribution d’énergie électrique. SIST EN 50110-2:2010
EN 50110-2:2010 - 10 - This statutory regulation specifies the particular requirements
to assess the safety of workers against electrical hazards during building, operation and maintenance of electrical utilities installations (transmission and distribution). In this decree, the choice of one of the three working procedures is left to the operating organization. 9.1.3 Arrêté interministériel du 17 janvier 1989 portant approbation d’un recueil d’instructions générales de sécurité d’ordre électrique. Ministerial decision approving the publication UTE C 18-510 as the guidance
to be applied by all companies working on or near electrical installations.
9.2 Rules and guides 9.2.1 Publication UTE C 18-510 de novembre 1988: recueil d’instructions générales de sécurité d’ordre électrique. Publication UTE C 18-510 of Union technique de l’Electricité (UTE) « Collection of general provisions for electrical safety ». This publication is a handbook based on the above two statutory regulations (decrees) and is provided by the employer with a receipt
to personnel working on electrical installations. It contains a collection of general provisions for electrical safety.
10 Germany (DE)
10.1 Laws and regulations
10.1 Outlines the general requirements for health and safety at work. 10.1.1 Arbeitsschutzgesetz
The Employees-Health-and-Safety-Act is the implementation of the EU-directive 89/391/EWG and contains the minimum requirements and principles for the identification of occupational hazards, and for the minimizing and eliminating of risk. The act also requires employees to be provided with the necessary instructions and for the safety and protection of their health. 10.1.2 Arbeitsstättenverordnung
The Place-of-work-regulation establishes what the employer has to take into account when fitting out and operating places of work with respect to the safety and the protection of health of the employees. 10.1.3 Betriebssicherheitsverordnung
This Operational safety regulation includes the requirements to ensure the health and safety of personnel at work and adequate levels of supervision. 10.1.4 Elektrobergverordnung
This Part of the Mining regulation contains the official mining regulations for electrical plants and electrical operating supplies as
laid down by
European and National standards and regulations. 10.1.5 UVV "Elektrische Anlagen und Betriebsmittel" BGV A3 / GUV-V A3 This Accident-prevention-regulation has been published by the German Professional Associations. It describes the rules and requirements for safety and health in relation to electrical installations and electrical supplies.
10.2 Standards and guides For the standards and guides listed under 10.2 more detailed requirements are made for practical use. SIST EN 50110-2:2010
- 11 - EN 50110-2:2010 10.2.1 DIN VDE 0105-100 (VDE 0105 Teil 100) Betrieb von elektrischen Anlagen - Nationaler Anhang zu DIN EN 50110-1:2004 Operation of electrical installations – National Annex to DIN EN 50110-1:2004 The German standard DIN VDE 0105-100 (VDE 0105 Part 100) describes the rules of behaviour which are necessary to ensure a safe operation of electrical installations. 10.2.2 DIN VDE 0105-103 (VDE 0105 Teil 103) Betrieb von elektrischen Anlagen – Zusatzfestlegungen für Bahnen Operation of electrical installations – Particular requirements for railways This standard adds particular requirements to DIN VDE 0105-100 (VDE 0105 Part 100) which are necessary to ensure a safe operation of electrical installations for railways. 10.2.3 DIN VDE 0105-4 (VDE 0105 Teil 4) Betrieb von Starkstromanlagen – Zusatzfestlegungen für ortsfeste elektrostatische Sprühanlagen Operation of power installations – Supplementary requirements for fixed electrostatic spraying equipment This standard covers supplementary requirements for a safe operation of fixed electrostatic spraying equipment. 10.2.4 DIN VDE 0105-5 (VDE 0105 Teil 5) Betrieb von Starkstromanlagen – Zusatzfestlegungen für Elektrofischereianlagen Operation of power installations – Supplementary specifications for electro-fishing installations This standard covers supplementary specifications for a safe operation of electro-fishing installations. 10.2.5 DIN VDE 0105-7 (VDE 0105 Teil 7) Betrieb von Starkstromanlagen – Zusatzfestlegungen für explosivstoffgefährdete Bereiche Operation of power installations – Supplementary requirements for atmospheres endangered by potentially explosive material This standard covers supplementary requirements for atmospheres endangered by potentially explosive material. 10.2.6 DIN VDE 0105-111 (VDE 0105 Teil 111) Betrieb von elektrischen Anlagen – Teil 111: Besondere Festlegungen für den Bergbau unter Tage Operation of electrical installations – Part 111: Particular requirements for underground mines This standard covers particular requirements for a safe operation of underground mines. 10.2.7 DIN VDE 0105-112 (VDE 0105 Teil 112) Betrieb von elektrischen Anlagen – Teil 112: Besondere Festlegungen für das Experimentieren mit elektrischer Energie in Unterrichtsräumen oder in dafür vorgesehenen Bereichen. Operation of electrical installations – Part 112: Particular requirements for experiments with electrical energy in lecture rooms This standard covers particular requirements for experiments with electrical energy in lecture rooms. SIST EN 50110-2:2010
EN 50110-2:2010 - 12 - 10.2.8 DIN VDE 1000-10 (VDE 1000-10) Anforderungen an die im Bereich der Elektrotechnik tätigen Personen Requirements for persons working in the line of work of electrical engineering This standard covers particular requirements for persons working in the line of work of electrical engineering. 10.2.9 DIN VDE 0701-0702 (VDE 0701-0702) Prüfung nach Instandsetzung, Änderung elektrischer Geräte – Wiederholungsprüfung elektrischer Geräte – Allgemeine Anforderungen für die elektrische Sicherheit Inspection after repair, modification of electrical appliances – Periodic inspection on electrical appliances – General requirements for electrical safety This standard covers particular requirements for Inspection after repair, modification of electrical appliances – Periodic inspection on electrical appliances. 10.2.10 TRBS 1201 Prüfungen von Arbeitsmitteln und überwachungsbedürftigen Anlagen This technical rule puts the “Operational-safety-regulation” in definite terms with regard to - the assessment and specification of the methods, sizes and duration of the required tests, the procedure for ensuring the competence of the person completing the test and the issue of any necessary certificates. 10.2.11 TRBS 1203 Teil 3
Befähigte Personen - Besondere Anforderungen - Elektrische Gefährdungen This part of the technical rule TRBS 1203 imposes additional requirements on the competent person completeing the tests to ensure the person is also protected from electrical hazards when completeing any tests. These requirements are in addition to the general requirements 10.2.12 TRBS 2131
Technische Regel zur Betriebssicherheit - Elektrische Gefährdung This technical rule applies to the assessment and justification of electrical hazards, electric arc, electric shock, electrical magnetic and electromagnetic fields and static electricity in connection with the provision and use of working appliances as well as the operation of plants requiring supervision. The rule also references the measures required for the protection of employees an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.