SIST EN 61800-7-201:2008

Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification

IEC 61800-7 specifies profiles for Power Drive Systems (PDS) and their mapping to existing communication systems by use of a generic interface model. The functions specified in this part of IEC 61800-7 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws. This part of IEC 61800-7 specifies profile type 1 for Power Drive Systems (PDS). Profile type 1 can be mapped onto different communication network technologies.

Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-201: Generisches Interface und Nutzung von Profilen für Leistungsantriebssysteme (PDS) - Spezifikation von Profil-Typ 1

Entraînements électriques de puissance à vitesse variable - Partie 7-201: Interface et utilisation génériques de profils pour les entraînements électriques de puissance - Spécifications des profils de type 1

La CEI 61800-7-201:2007 spécifie les profils dédiés aux entraînements électriques de puissance (PDS) et leur mise en correspondance avec les systèmes de communication existants grâce à un modèle d'interface générique ainsi que le type de profil 1 pour les entraînements électriques de puissance (PDS). Le type de profil 1 peut être mis en correspondance avec différentes technologies de réseau de communication.

Električni pogonski sistemi z nastavljivo hitrostjo - 7-201. del: Generični vmesnik in uporaba profilov za električne pogonske sisteme - Specifikacije profilov tipa 1 (IEC 61800-7-201:2007)

General Information

• Status: Withdrawn
• Publication Date: 04-May-2008
• Withdrawal Date: 17-Feb-2019
• ICS: 29.200 - Rectifiers. Convertors. Stabilized power supply
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 15-Feb-2019
• Due Date: 10-Mar-2019
• Completion Date: 18-Feb-2019
• Ref Project: EN 61800-7-201:2008 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification

Relations

• Replaced By: SIST EN 61800-7-201:2016 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 61800-7-201:2016 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 61800-7-201:2016 - Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification
• Effective Date: 01-May-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61800-7-201:2008
01-junij-2008
(OHNWULþQLSRJRQVNLVLVWHPL]QDVWDYOMLYRKLWURVWMRGHO*HQHULþQLYPHVQLN
LQXSRUDEDSURILORY]DHOHNWULþQHSRJRQVNHVLVWHPH6SHFLILNDFLMHSURILORYWLSD
,(&
Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use
of profiles for power drive systems - Profile type 1 specification (IEC 61800-7-201:2007)
Elektrische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-201:
Generisches Interface und Nutzung von Profilen für Leistungsantriebssysteme (PDS) -
Spezifikation von Profil-Typ 1 (IEC 61800-7-201:2007)
Entraînements électriques de puissance à vitesse variable - Partie 7-201: Interface et
utilisation génériques de profils pour les entraînements électriques de puissance -
Spécifications des profils de type 1 (CEI 61800-7-201:2007)
Ta slovenski standard je istoveten z: EN 61800-7-201:2008
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
35.100.05 9HþVORMQHXSRUDEQLãNH Multilayer applications
UHãLWYH
SIST EN 61800-7-201:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61800-7-201

NORME EUROPÉENNE
April 2008
EUROPÄISCHE NORM

ICS 29.200; 35.100.05


English version


Adjustable speed electrical power drive systems -
Part 7-201: Generic interface and use of profiles for power drive systems -
Profile type 1 specification
(IEC 61800-7-201:2007)


Entraînements électriques de puissance  Elektrische Leistungsantriebssysteme
à vitesse variable - mit einstellbarer Drehzahl -
Partie 7-201: Interface et utilisation Teil 7-201: Generisches Interface
génériques de profils pour les und Nutzung von Profilen
entraînements électriques de puissance - für Leistungsantriebssysteme (PDS) -
Spécifications des profils de type 1 Spezifikation von Profil-Typ 1
(CEI 61800-7-201:2007) (IEC 61800-7-201:2007)




This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61800-7-201:2008 E

---------------------- Page: 2 ----------------------

EN 61800-7-201:2008 - 2 -
Foreword
The text of document 22G/184/FDIS, future edition 1 of IEC 61800-7-201, prepared by SC 22G,
Adjustable speed electric drive systems incorporating semiconductor power converters, of IEC TC 22,
Power electronic systems and equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61800-7-201 on 2008-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61800-7-201:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61499-1 NOTE  Harmonized as EN 61499-1:2005 (not modified).
IEC 61800 NOTE  Harmonized in EN 61800 series (not modified).
IEC 61800-7-1 NOTE  Harmonized as EN 61800-7-1:2008 (not modified).
IEC 61800-7-202 NOTE  Harmonized as EN 61800-7-202:2008 (not modified).
IEC 61800-7-203 NOTE  Harmonized as EN 61800-7-203:2008 (not modified).
IEC 61800-7-204 NOTE  Harmonized as EN 61800-7-204:2008 (not modified).
IEC 61800-7-302 NOTE  Harmonized as EN 61800-7-302:2008 (not modified).
IEC 61800-7-303 NOTE  Harmonized as EN 61800-7-303:2008 (not modified).
IEC 61800-7-304 NOTE  Harmonized as EN 61800-7-304:2008 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61800-7-201:2008
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1)
- - Industrial communications subsystem based EN 50325-4 -
on ISO 11898 (CAN) for controller-device
interfaces -
Part 4: CANopen


IEC 61800-7 Series Adjustable speed electrical power drive EN 61800-7 Series
systems - Generic interface and use of
profiles for power drive systems


1) 2)
IEC 61800-7-301 - Adjustable speed electrical power drive EN 61800-7-301 2008
systems -
Part 7-301: Generic interface and use of
profiles for power drive systems - Mapping of
profile type 1 to network technologies




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

IEC 61800-7-201
Edition 1.0 2007-11
INTERNATIONAL
STANDARD

Adjustable speed electrical power drive systems –
Part 7-201: Generic interface and use of profiles for power drive systems –
Profile type 1 specification


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XG
ICS 29.200; 35.100.05 ISBN 2-8318-9375-5

---------------------- Page: 5 ----------------------

– 2 – 61800-7-201 © IEC:2007(E)
CONTENTS
FOREWORD.14
INTRODUCTION.16

1 Scope.19
2 Normative references .19
3 Terms, definitions and abbreviated terms .19
3.1 Terms and definitions .19
3.2 Abbreviated terms .23
4 General .24
4.1 General considerations.24
4.2 Communication interface .24
4.3 Object dictionary .25
5 Data types.25
5.1 Standard data types .25
5.2 Record definitions .26
6 General object definitions .27
6.1 General .27
6.2 Communication parameter objects.27
6.3 Additional identification and information objects .28
6.3.1 Object 6402 : Motor type .28
h
6.3.2 Object 6403 : Motor catalogue number .29
h
6.3.3 Object 6404 : Motor manufacturer.29
h
6.3.4 Object 6405 : http motor catalogue address.30
h
6.3.5 Object 6406 : Motor calibration date .30
h
6.3.6 Object 6407 : Motor service period .31
h
6.3.7 Object 6503 : Drive catalogue number .31
h
6.3.8 Object 6505 : http drive catalogue address .32
h
7 Error codes and error behaviour .32
7.1 Error codes .32
7.2 Error behavior .36
8 Controlling the power drive system .37
8.1 General .37
8.2 Finite state automaton.37
8.3 Modes of operation.40
8.4 Detailed object specifications .41
8.4.1 Object 6040 : Controlword .41
h
8.4.2 Object 6041 : Statusword.42
h
8.4.3 Object 603F : Error code .43
h
8.4.4 Object 6007 : Abort connection option code.44
h
8.4.5 Object 605A : Quick stop option code .45
h
8.4.6 Object 605B : Shutdown option code .46
h
8.4.7 Object 605C : Disable operation option code .46
h
8.4.8 Object 605D : Halt option code .47
h
8.4.9 Object 605E : Fault reaction option code .48
h
8.4.10 Object 6060 : Modes of operation .49
h
8.4.11 Object 6061 : Modes of operation display .50
h

---------------------- Page: 6 ----------------------

61800-7-201 © IEC:2007(E) – 3 –
8.4.12 Object 6502 : Supported drive modes .50
h
9 Factor group.51
9.1 General .51
9.2 Detailed object definitions .51
9.2.1 Object 608F : Position encoder resolution.51
h
9.2.2 Object 6090 : Velocity encoder resolution .52
h
9.2.3 Object 6091 : Gear ratio .53
h
9.2.4 Object 6092 : Feed constant .54
h
9.2.5 Object 607E : Polarity.55
h
10 Profile position mode.56
10.1 General information.56
10.2 Functional description .57
10.2.1 General .57
10.2.2 Single set-point .58
10.2.3 Set of set-points .59
10.3 General definitions .60
10.4 Use of controlword and statusword.60
10.5 Detailed object definitions .61
10.5.1 Object 607A : Target position .61
h
10.5.2 Object 607B : Position range limit.62
h
10.5.3 Object 607D : Software position limit .62
h
10.5.4 Object 607F : Max profile velocity.64
h
10.5.5 Object 6080 : Max motor speed .64
h
10.5.6 Object 6081 : Profile velocity.65
h
10.5.7 Object 6082 : End velocity.65
h
10.5.8 Object 6083 : Profile acceleration.66
h
10.5.9 Object 6084 : Profile deceleration.66
h
10.5.10 Object 6085 : Quick stop deceleration .67
h
10.5.11 Object 6086 : Motion profile type .67
h
10.5.12 Object 60A3 : Profile jerk use .68
h
10.5.13 Object 60A4 : Profile jerk.69
h
10.5.14 Object 60C5 : Max acceleration.70
h
10.5.15 Object 60C6 : Max deceleration.71
h
11 Homing mode .72
11.1 General information.72
11.2 Functional description .72
11.3 General definitions .73
11.3.1 Method 1: Homing on negative limit switch and index pulse.73
11.3.2 Method 2: Homing on positive limit switch and index pulse.73
11.3.3 Method 3 and 4: Homing on positive home switch and index pulse .73
11.3.4 Method 5 and 6: Homing on negative home switch and index pulse.74
11.3.5 Method 7 to 14: Homing on home switch and index pulse.74
11.3.6 Method 15 and 16: Reserved.75
11.3.7 Method 17 to 30: Homing without index pulse.75
11.3.8 Method 31 and 32: Reserved.76
11.3.9 Method 33 and 34: Homing on index pulse .76
11.3.10 Method 35: Homing on index pulse.76
11.3.11 Method 36: Homing with touch-probe .76
11.4 Use of controlword and statusword.76

---------------------- Page: 7 ----------------------

– 4 – 61800-7-201 © IEC:2007(E)
11.5 Detailed object definitions .77
11.5.1 Object 607C : Home offset .77
h
11.5.2 Object 6098 : Homing method .78
h
11.5.3 Object 6099 : Homing speeds.79
h
11.5.4 Object 609A : Homing acceleration.80
h
11.5.5 Object 60B8 : Touch probe function.80
h
11.5.6 Object 60B9 : Touch probe status.82
h
11.5.7 Object 60BA : Touch probe pos1 pos value .82
h
11.5.8 Object 60BB : Touch probe pos1 neg value .83
h
11.5.9 Object 60BC : Touch probe pos2 pos value .83
h
11.5.10 Object 60BD : Touch probe pos2 neg value.84
h
12 Position control function .84
12.1 General information.84
12.2 Functional description .85
12.3 Detailed object definitions .87
12.3.1 Object 6062 : Position demand value .87
h
12.3.2 Object 6063 : Position actual internal value .87
h
12.3.3 Object 6064 : Position actual value.88
h
12.3.4 Object 6065 : Following error window .88
h
12.3.5 Object 6066 : Following error time out .89
h
12.3.6 Object 6067 : Position window.90
h
12.3.7 Object 6068 : Position window time .90
h
12.3.8 Object 60F4 : Following error actual value.91
h
12.3.9 Object 60FA : Control effort.91
h
12.3.10 Object 60FC : Position demand internal value .92
h
12.3.11 Object 60F2 : Positioning option code .92
h
13 Interpolated position mode .94
13.1 General information.94
13.2 Functional description .95
13.2.1 General .95
13.2.2 Linear interpolated position mode with several axes .96
13.2.3 Buffer strategies for the interpolated position mode .97
13.2.4 Interpolated position mode FSA.98
13.3 General definitions .99
13.4 Use of controlword and statusword.99
13.5 Detailed object definitions .100
13.5.1 Object 60C0 : Interpolation sub mode select.100
h
13.5.2 Object 60C1 : Interpolation data record .101
h
13.5.3 Object 60C2 : Interpolation time period.102
h
13.5.4 Object 60C4 : Interpolation data configuration . 103
h
14 Profile velocity mode .105
14.1 General information.105
14.2 Functional description .106
14.3 General definitions .107
14.4 Use of controlword and statusword.107
14.5 Detailed object definitions .108
14.5.1 Object 6069 : Velocity sensor actual value . 108
h
14.5.2 Object 606A : Sensor selection code .108
h
14.5.3 Object 606B : Velocity demand value .109
h

---------------------- Page: 8 ----------------------

61800-7-201 © IEC:2007(E) – 5 –
14.5.4 Object 606C : Velocity actual value .110
h
14.5.5 Object 606D : Velocity window .110
h
14.5.6 Object 606E : Velocity window time .111
h
14.5.7 Object 606F : Velocity threshold.111
h
14.5.8 Object 6070 : Velocity threshold time .112
h
14.5.9 Object 60FF : Target velocity .112
h
14.5.10 Object 60F8 : Max slippage .113
h
15 Profile torque mode .113
15.1 General information.113
15.2 Functional description .113
15.3 General definitions .114
15.4 Use of controlword and statusword.114
15.5 Detailed object definitions .115
15.5.1 Object 6071 : Target torque.115
h
15.5.2 Object 6072 : Max torque .116
h
15.5.3 Object 6073 : Max current .116
h
15.5.4 Object 6074 : Torque demand .117
h
15.5.5 Object 6075 : Motor rated current .117
h
15.5.6 Object 6076 : Motor rated torque .118
h
15.5.7 Object 6077 : Torque actual value .118
h
15.5.8 Object 6078 : Current actual value .119
h
15.5.9 Object 6079 : DC link circuit voltage.119
h
15.5.10 Object 6087 : Torque slope .120
h
15.5.11 Object 6088 : Torque profile type .120
h
16 Velocity mode.121
16.1 General information.121
16.2 Functional description .122
16.2.1 Velocity limit function.122
16.2.2 Ramp function .122
16.2.3 Velocity control function .122
16.2.4 Factor function .122
16.3 General definitions .123
16.4 Use of controlword and statusword.123
16.5 Detailed object definitions .124
16.5.1 Object 6042 : vl target velocity.124
h
16.5.2 Object 6043 : vl velocity demand .125
h
16.5.3 Object 6044 : vl velocity actual value .125
h
16.5.4 Object 6046 : vl velocity min max amount .126
h
16.5.5 Object 6049 : vl velocity deceleration.127
h
16.5.6 Object 6048 : vl velocity acceleration.128
h
16.5.7 Object 604A : vl velocity quick stop .130
h
16.5.8 Object 604B : vl set-point factor.131
h
16.5.9 Object 604C : vl dimension factor .132
h
17 Cyclic synchronous position mode.133
17.1 General information.133
17.2 Functional description .134
17.3 Use of controlword and statusword.135
17.4 Detailed object definitions .136
17.4.1 Object 60B0 : Position offset .136
h

---------------------- Page: 9 ----------------------

– 6 – 61800-7-201 © IEC:2007(E)
17.4.2 Object 60B1 : Velocity offset.136
h
17.4.3 Object 60B2 : Torque offset .137
h
18 Cyclic synchronous velocity mode .137
18.1 General information.137
18.2 General definitions .138
18.3 Functional description .138
18.4 Use of controlword and statusword.139
19 Cyclic synchronous torque mode . 140
19.1 General information.
...