Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Characteristics for check valves and non-return valves

This document specifies the characteristics and describes test methods for check and non-return valves for CO2, inert gas or halocarbon gas fire extinguishing systems.
Non-return and check valves allow the passage in the direction of flow and they prevent flow in the reverse direction.
This document is applicable to check valves installed between container valve and manifold and non-return valves installed in pilot lines, except those valves which are tested in combination with non-electrical control devices.

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 13: Eigenschaften für Rückflussverhinderer und Rückschlagventile

Dieses Dokument legt Anforderungen und Prüfverfahren für Rückflussverhinderer und Rückschlagventile für C02-Feuerlöschanlagen, Inertgas-Feuerlöschanlagen oder Feuerlöschanlagen mit halogenierten Kohlenwasserstoffen fest.
Rückflussverhinderer und Rückschlagventile ermöglichen den Durchfluss in Flussrichtung und verhindern ihn in entgegengesetzter Richtung.
Dieses Dokument kann angewendet werden auf Rückflussverhinderer, die zwischen Behälterventil und Sammelrohr installiert sind, und auf Rückschlagventile, die in Steuerleitungen installiert sind außer denjenigen Ventilen, die in Kombination mit nichtelektrischen Steuereinrichtungen geprüft werden.

Installations fixes de lutte contre l'incendie - Éléments constitutifs des installations d'extinction à gaz - Partie 13 : Caractéristiques des clapets anti-retour de circuit d'émission et de circuit de pilotage

Le présent document spécifie les caractéristiques et décrit les méthodes d’essai concernant les clapets anti retour et les clapets anti-retour de circuit de pilotage utilisés dans les installations d’extinction au CO2, à gaz inerte et à gaz inhibiteur.
Les clapets anti-retour de circuit d’émission et de circuit de pilotage permettent le passage dans le sens de l’écoulement et empêchent l’écoulement dans le sens inverse.
Le présent document est applicable aux clapets anti-retour de circuit d’émission installés entre la vanne du réservoir et le collecteur et aux clapets anti-retour de circuit de pilotage installés dans les canalisations pilotes, à l’exception de ceux dont les essais sont effectués en les associant aux dispositifs non électriques de commande.

Vgrajene naprave za gašenje - Sestavni deli sistemov za gašenje s plinom - 13. del: Značilnosti za kontrolne ventile in nepovratne ventile

General Information

Status
Not Published
Public Enquiry End Date
30-Dec-2022
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
04-Apr-2024
Due Date
09-Apr-2024
Completion Date
04-Apr-2024

Relations

Buy Standard

Draft
prEN 12094-13:2022
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 12094-13:2022
01-december-2022
Vgrajene naprave za gašenje - Sestavni deli sistemov za gašenje s plinom - 13. del:
Značilnosti za kontrolne ventile in nepovratne ventile
Fixed firefighting systems - Components for gas extinguishing systems - Part 13:
Characteristics for check valves and non-return valves
Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen
Löschmitteln - Teil 13: Eigenschaften für Rückflussverhinderer und Rückschlagventile
Installations fixes de lutte contre l'incendie - Éléments constitutifs des installations
d'extinction à gaz - Partie 13 : Caractéristiques des clapets anti-retour de circuit
d'émission et de circuit de pilotage
Ta slovenski standard je istoveten z: prEN 12094-13
ICS:
13.220.10 Gašenje požara Fire-fighting
oSIST prEN 12094-13:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12094-13:2022

---------------------- Page: 2 ----------------------
oSIST prEN 12094-13:2022


DRAFT
EUROPEAN STANDARD
prEN 12094-13
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2022
ICS 13.220.20 Will supersede EN 12094-13:2001
English Version

Fixed firefighting systems - Components for gas
extinguishing systems - Part 13: Characteristics for check
valves and non-return valves
Installations fixes de lutte contre l'incendie - Éléments Ortsfeste Brandbekämpfungsanlagen - Bauteile für
constitutifs des installations d'extinction à gaz - Partie Löschanlagen mit gasförmigen Löschmitteln - Teil 13:
13 : Caractéristiques des clapets anti-retour de circuit Eigenschaften für Rückflussverhinderer und
d'émission et de circuit de pilotage Rückschlagventile
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12094-13:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12094-13:2022
prEN 12094-13:2022 (E)
Contents Page
European foreword . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Characteristics . 7
4.1 Operational reliability . 7
4.1.1 Internal pressure . 7
4.1.2 Resistance to strength . 8
4.1.3 Resistance t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.