SIST EN ISO 4287:2000/A1:2011
(Amendment)Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 1: Peak count number (ISO 4287:1997/Amd 1:2009)
This International Standard specifies terms, definitions and parameters for the determination of surface texture (roughness, waviness and primary profile) by profiling methods.
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Benennungen, Definitionen und Kenngrößen der Oberflächenbeschaffenheit (ISO 4287:1997/Amd 1:2009)
Diese Internationale Norm enthält Definitionen und Kenngrößen zur Beschreibung der Oberflächenbeschaffenheit
(Rauheits-, Welligkeits- und Primärprofil) durch das Tastschnittverfahren.
Spécification géométrique des produits (GPS) - État de surface: Méthode du profil - Termes, définitions et paramètres d'état de surface - Amendement 1: Nombre de pics (ISO 4287:1997/Amd 1:2009)
Specifikacija geometrijskih veličin izdelka - Tekstura površine: profilna metoda - Izrazi, definicije in parametri teksture površine (ISO 4287:1997/Amd 1:2009)
Ta mednarodni standard določa izraze, definicije in parametre za določevanje teksture površine (hrapavosti, valovitosti in primarnega profila) z metodami profiliranja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4287:2000/A1:2011
01-junij-2011
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND7HNVWXUDSRYUãLQH SURILOQDPHWRGD
,]UD]LGHILQLFLMHLQSDUDPHWULWHNVWXUHSRYUãLQH ,62 $PG
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms,
definitions and surface texture parameters - Amendment 1: Peak count number (ISO
4287:1997/Amd 1:2009)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit:
Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der Benennungen,
Definitionen und Kenngrößen der Oberflächenbeschaffenheit (ISO 4287:1997/Amd
1:2009)
Spécification géométrique des produits (GPS) - État de surface: Méthode du profil -
Termes, définitions et paramètres d'état de surface - Amendement 1: Nombre de pics
(ISO 4287:1997/Amd 1:2009)
Ta slovenski standard je istoveten z: EN ISO 4287:1998/A1:2009
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 4287:2000/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4287:2000/A1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 4287:2000/A1:2011
EUROPEAN STANDARD
EN ISO 4287:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2009
ICS 01.040.17; 17.040.20
English Version
Geometrical Product Specifications (GPS) - Surface texture:
Profile method - Terms, definitions and surface texture
parameters - Amendment 1: Peak count number (ISO
4287:1997/Amd 1:2009)
Spécification géométrique des produits (GPS) - État de Geometrische Produktspezifikation (GPS) -
surface: Méthode du profil - Termes, définitions et Oberflächenbeschaffenheit: Tastschnittverfahren - Begriffe
paramètres d'état de surface - Amendement 1: Nombre de und Oberflächenkenngrößen - Änderung 1:
pics (ISO 4287:1997/Amd 1:2009) Spitzenzählparamenter (ISO 4287:1997/Amd 1:2009)
This amendment A1 modifies the European Standard EN ISO 4287:1998; it was approved by CEN on 27 May 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4287:1998/A1:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4287:2000/A1:2011
EN ISO 4287:1998/A1:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4287:2000/A1:2011
EN ISO 4287:1998/A1:2009 (E)
Foreword
This document (EN ISO 4287:1998/A1:2009) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of
which is held by AFNOR.
This Amendment to the European Standard EN ISO 4287:1998 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and
conflicting national standards shall be withdrawn at the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece,
...
SLOVENSKI STANDARD
SIST EN ISO 4287:2000/oprA1:2007
01-julij-2007
6SHFLILNDFLMDJHRPHWULMVNLKYHOLþLQL]GHOND7HNVWXUDSRYUãLQH SURILOQDPHWRGD
3RLPHQRYDQMDGHILQLFLMHLQSDUDPHWULWHNVWXUHSRYUãLQH ,62 '$0
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms,
definitions and surface texture parameters - Amendment 1: Peak count parameter (ISO
4287:1997/DAM 1:2007)
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit:
Tastschnittverfahren - Benennungen, Definitionen und Kenngrößen der
Oberflächenbeschaffenheit (ISO 4287:1997/DAM 1:2007)
Spécification géométrique des produits (GPS) - État de surface: Méthode du profil -
Termes, définitions et parametres d'état de surface - Amendement 1: Parametre de
densité de pics (ISO 4287:1997/DAM 1:2007)
Ta slovenski standard je istoveten z: EN ISO 4287:1998/prA1
ICS:
01.040.17 Meroslovje in merjenje. Metrology and measurement.
Fizikalni pojavi (Slovarji) Physical phenomena
(Vocabularies)
17.040.20 Lastnosti površin Properties of surfaces
SIST EN ISO 4287:2000/oprA1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN ISO 4287:1998
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2007
ICS 17.040.30
English Version
Geometrical Product Specifications (GPS) - Surface texture:
Profile method - Terms, definitions and surface texture
parameters - Amendment 1: Peak count parameter (ISO
4287:1997/DAM 1:2007)
Spécification géométrique des produits (GPS) - État de
surface: Méthode du profil - Termes, définitions et
paramètres d'état de surface - Amendement 1: Paramètre
de densité de pics (ISO 4287:1997/DAM 1:2007)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 290.
This draft amendment A1, if approved, will modify the European Standard EN ISO 4287:1998. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4287:1998/prA1:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 4287:1998/prA1:2007 (E)
Foreword
This document (EN ISO 4287:1998/prA1:2007) has been prepared by Technical Committee
ISO/TC 213 "Dimensional and geometrical product specifications and verification" in
collaboration with Technical Committee CEN/TC 290 "Dimensional and geometrical product
specification and verification", the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DAM 4287:1998 has been approved by CEN as EN ISO
4287:1998/prA1:2007 without any modifications.
2
---------------------- Page: 3 ----------------------
DRAFT AMENDMENT ISO 4287:1997/DAmd 1
ISO/TC 213 Secretariat: DS
Voting begins on: Voting terminates on:
2007-05-03 2007-10-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geometrical Product Specifications (GPS) — Surface texture:
Profile method — Terms, definitions and surface texture
parameters
AMENDMENT 1: Peak count parameter
Spécification géométrique des produits (GPS) — État de surface: Méthode du profil — Termes, définitions et
paramètres d'état de surface
AMENDEMENT 1: Paramètre de densité de pics
ICS 01.040.17; 17.040.20
ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.