iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50155:2002/A1:2003

(Amendment)

Railway applications - Electronic equipment used on rolling stock

Railway applications - Electronic equipment used on rolling stock

Superseded by EN 50155:2007

Bahnanwendungen - Elektronische Einrichtungen auf Schienenfahrzeugen

Applications ferroviaires - Equipements électroniques utilisés sur le matériel roulant

Železniške naprave – Elektronska oprema na voznih sredstvih – Dopolnilo A1

General Information

Status
Withdrawn
Publication Date
30-Nov-2003
Withdrawal Date
13-Sep-2007
ICS
29.280 - Electric traction equipment
45.060.10 - Tractive stock
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Sep-2007
Due Date
06-Oct-2007
Completion Date
14-Sep-2007
Directive
96/48/EC - Interoperability of the trans-European high-speed rail system
Ref Project
EN 50155:2001/A1:2002 - Railway applications - Electronic equipment used on rolling stock

Relations

Replaced By
SIST EN 50155:2007 - Railway applications - Electronic equipment used on rolling stock
Effective Date
29-Jan-2023
Replaced By
SIST EN 50155:2007 - Railway applications - Electronic equipment used on rolling stock
Effective Date
07-Jun-2022
Replaced By
SIST EN 50155:2007 - Railway applications - Electronic equipment used on rolling stock
Effective Date
01-Oct-2007
Amends
SIST EN 50155:2002 - Railway applications - Electronic equipment used on rolling stock
Effective Date
21-Sep-2010
Amends
SIST EN 50155:2002 - Railway applications - Electronic equipment used on rolling stock
Effective Date
29-Jan-2023
Amends
SIST EN 50155:2002 - Railway applications - Electronic equipment used on rolling stock
Effective Date
07-Jun-2022

Buy Standard

EN 50155:2002/A1:2003EN 50155:2002/A1:2003
PreviousNext
Amendment
EN 50155:2002/A1:2003
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 50155:2002/A1:2003

STANDARD
december 2003
Železniške naprave – Elektronska oprema na voznih sredstvih – Dopolnilo A1
Railway applications - Electronic equipment used on rolling stock
ICS 29.280; 45.060.10 Referenčna številka
SIST EN 50155:2002/A1:2003(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD EN 50155/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2002

ICS 29.280; 45.060.10


English version


Railway applications -
Electronic equipment used on rolling stock


Applications ferroviaires -  Bahnanwendungen -
Equipements électroniques utilisés Elektronische Einrichtungen
sur le matériel roulant auf Schienenfahrzeugen







This amendment A1 modifies the European Standard EN 50155:2001; it was approved by CENELEC on
2002-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50155:2001/A1:2002 E

---------------------- Page: 2 ----------------------

EN 50155:2001/A1:2002 - 2 -
Foreword
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document.
This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards.
The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281).
To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised.
NOTE   The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications.
For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50238-1:2021(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
EN 50238-1:2019

This European Standard describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS) for specific routes. It references the methods of measurement of interference currents and magnetic fields, the methods of measurement of the susceptibility of train detection systems and the characterization of traction power supplies. The process described in this standard is equally applicable to mainline, lightrail and metro type railways.
The basic parameters of compatibility for mainline railways are covered by the ERA Interface document (ERA/ERTMS/033281).
It should be noted that the demonstration of compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this standard.
Under the Interoperability Directive, two stages of compatibility are defined. The first stage is for authorization for putting into service against generic limits, and the second stage - for putting into use, when specific limits for compatibility with TDS are addressed which are outside the general limits or non interoperable TDS are installed on the line over which the RST will run.
Compatibility requirements for non-mainline or isolated light rail/metro type lines are addressed in one stage of authorization.
This European Standard is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this European Standard. However, as far as is reasonably practicable, this European Standard may be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50238-2:2020(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits
CLC/TS 50238-2:2020

Unchanged with respect to the current edition CLC/TS 50238-2:2015.
Scope of the revision:
- to include the corrigendum CLC/TS 50238-2:2015/AC:2016-07,
- to correct editorial errors and to align definition of terms with EN 50238 series, EN 50617 series, IEV 60050-
811:2017 and IEV 60050-821:2017,
- to update Annex A "Interference current limits for Rolling Stock"
- to review the need of Annex B "Rolling Stock Interference Evaluation methods"

  • Technical specification
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50728:2023(Main)
Railway applications - Rolling stock - Testing for electromagnetic compatibility with track circuits
prEN 50728

This document defines the measurement and evaluation methods of rolling stock interference current emissions to demonstrate compatibility with track circuits. This includes rolling stock with or without traction equipment. The established limits for compatibility are defined in ERA/ERTMS/033281, PD CLC/TS 50238 2 or NNTRs as current flowing between the vehicle and the electric traction power supply system that can disturb the track circuit receiver, as part of the track circuit system. Additionally, the referred documents can define a minimum rolling stock impedance in order to guarantee compatibility between the electric traction power supply system and track circuits.
This document is relevant to the interference current limits defined in the ‘frequency management’ for track circuits as defined in ERA/ERTMS/033281. It is also applicable to the demonstration of compatibility with all other types of track circuits which have established compatibility according to EN 50617 1. Finally, the methodology defined in this document can also be applied to other track circuit types, including those for which the only requirements are defined in National Notified Technical Rules.
NOTE   Interface parameters between rolling stock and track circuits other than interference currents and impedance are out of the scope of this document.

  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50238-3:2022(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters
CLC/TS 50238-3:2022

For the purpose of demonstrating compatibility between rolling stock and axle counter detectors, this document defines the interference limits and evaluation methods to verify rolling stock emissions. Wheel sensors and crossing loops are not covered by this document.
This document gives recommended individual limits to be applied to establish compatibility between RST and all selected types of axle counter detectors, including any covered by national standards.
The list of selected types of axle counters and their limits for compatibility are drawn on the basis of established performance criteria. It is expected that the trend for newly signalled interoperable lines will be fitted with types that meet the compatibility limits published in the TSI CCS Interfaces Document (ERA/ERTMS/033281).
To ensure adequate operational availability, it is essential that the rolling stock complies with the defined limits; otherwise, the established availability of the valid output function of axle counter detectors may be compromised.
NOTE   The influences from metal parts or inductively coupled resonant circuits on the vehicle, eddy current brakes or magnetic brakes, are not covered by this document but are considered on the basis of national technical specifications.
For wheel sensors and wheel detectors in other applications than axle counters but utilizing the same rail sensors and detectors, transient and continuous interference can be considered as equivalent to axle counter detectors or axle counter sensors.

  • Technical specification
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50238-1:2021(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
EN 50238-1:2019

This European Standard describes a process to demonstrate compatibility between Rolling Stock (RST) and Train Detection Systems (TDS) for specific routes. It references the methods of measurement of interference currents and magnetic fields, the methods of measurement of the susceptibility of train detection systems and the characterization of traction power supplies. The process described in this standard is equally applicable to mainline, lightrail and metro type railways.
The basic parameters of compatibility for mainline railways are covered by the ERA Interface document (ERA/ERTMS/033281).
It should be noted that the demonstration of compatibility between the rolling stock and infrastructure with respect to physical dimensions is not detailed in this standard.
Under the Interoperability Directive, two stages of compatibility are defined. The first stage is for authorization for putting into service against generic limits, and the second stage - for putting into use, when specific limits for compatibility with TDS are addressed which are outside the general limits or non interoperable TDS are installed on the line over which the RST will run.
Compatibility requirements for non-mainline or isolated light rail/metro type lines are addressed in one stage of authorization.
This European Standard is not generally applicable to those combinations of rolling stock, traction power supply and train detection system which were accepted as compatible prior to the issue of this European Standard. However, as far as is reasonably practicable, this European Standard may be applied to modifications of rolling stock, traction power supply or train detection systems which may affect compatibility.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50238-2:2020(Main)
Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits
CLC/TS 50238-2:2020

Unchanged with respect to the current edition CLC/TS 50238-2:2015.
Scope of the revision:
- to include the corrigendum CLC/TS 50238-2:2015/AC:2016-07,
- to correct editorial errors and to align definition of terms with EN 50238 series, EN 50617 series, IEV 60050-
811:2017 and IEV 60050-821:2017,
- to update Annex A "Interference current limits for Rolling Stock"
- to review the need of Annex B "Rolling Stock Interference Evaluation methods"

  • Technical specification
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 50728:2023(Main)
Railway applications - Rolling stock - Testing for electromagnetic compatibility with track circuits
prEN 50728

This document defines the measurement and evaluation methods of rolling stock interference current emissions to demonstrate compatibility with track circuits. This includes rolling stock with or without traction equipment. The established limits for compatibility are defined in ERA/ERTMS/033281, PD CLC/TS 50238 2 or NNTRs as current flowing between the vehicle and the electric traction power supply system that can disturb the track circuit receiver, as part of the track circuit system. Additionally, the referred documents can define a minimum rolling stock impedance in order to guarantee compatibility between the electric traction power supply system and track circuits.
This document is relevant to the interference current limits defined in the ‘frequency management’ for track circuits as defined in ERA/ERTMS/033281. It is also applicable to the demonstration of compatibility with all other types of track circuits which have established compatibility according to EN 50617 1. Finally, the methodology defined in this document can also be applied to other track circuit types, including those for which the only requirements are defined in National Notified Technical Rules.
NOTE   Interface parameters between rolling stock and track circuits other than interference currents and impedance are out of the scope of this document.

  • Draft
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day