SIST EN 15183:2006
(Main)Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test
This European Standard specifies a method for determining the corrosion protection performance of corrosion protection products or systems, as defined in EN 1504 7.
Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Prüfung des Korrosionsschutzes
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Leistungsvermögens von Produkten oder Systemen für den Korrosionsschutz, die der Definition in prEN 1504 7 entsprechen, fest.
Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essais - Essai d'évaluation de la protection anticorrosion
La présente Norme européenne spécifie une méthode permettant de déterminer l’efficacité de la protection anticorrosion assurée par les systemes ou produits de protection contre la corrosion tels que définis dans l’EN 1504-7
Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode – Preskus korozijske zaščite
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection testProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essais - Essai d'évaluation de la protection anticorrosionProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Prüfung des KorrosionsschutzesTa slovenski standard je istoveten z:EN 15183:2006SIST EN 15183:2006en91.080.40Betonske konstrukcijeConcrete structuresICS:SLOVENSKI
STANDARDSIST EN 15183:200601-december-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15183August 2006ICS 91.080.40 English VersionProducts and systems for the protection and repair of concretestructures - Test methods - Corrosion protection testProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essais - Essaid'évaluation de la protection anticorrosionProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Prüfung des KorrosionsschutzesThis European Standard was approved by CEN on 19 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15183:2006: E
EN 15183:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Equipment.5 6 Method of test.5 7 Test report.7 Bibliography.9
EN 15183:2006 (E) 3 Foreword This document (EN 15183:2006) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by December 2008. This European Standard is one of a series dealing with products and systems for the protection and repair of concrete structures. It describes a method of testing the corrosion protection provided by coatings for application to reinforcing bars. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 15183:2006 (E) 4 1 Scope This European Standard specifies a method for determining the corrosion protection performance of corrosion protection products or systems, as defined in EN 1504-7. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement — Part 1: Determination of strength EN 1504-1:2005, Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 1: Definitions EN 1504-7:2006, Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 7: Reinforcement corrosion protection ENV 1504-9:1997, Products and systems for the protection and repair of concrete structures — Definitions, requirements, quality control and evaluation of conformity — Part 9: General principles for the use of products and systems EN 1766, Products and systems for the protection and repair of concrete structures — Test methods — Reference concretes for testing EN 10027-1, Designation systems for steels — Part 1: Steel names EN 10080, Steel for the reinforcement of concrete — Weldable reinforcing steel — General EN 60068-2-11, Environmental testing — Part 2: Tests — Test Ka: Salt mist (IEC 60068-2-11:1981) EN ISO 4287, Geometrical product specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters (ISO 4287:1997) EN ISO 6988, Metallic and other non-organic coatings — Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) EN ISO 12944-4, Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation (ISO 12944-4:1998) ISO 8486-1, Bonded abrasives — Determinatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.