SIST EN 300 113-1 V1.3.1:2003

• Abstract:

  To incorporate the text and tables corresponding to the sought change of status of the standard

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.060.99 - Other equipment for radiocommunications
• ICS: 33.070.01 - Mobile services in general
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 113-1 V1.3.1 (2001-03) - ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 1: Technical characteristics and methods of measurement

Overview

SIST EN 300 113-1 V1.3.1:2003 is a European standard developed by the Slovenski inštitut za standardizacijo (SIST), aligning with ETSI EN 300 113-1. It specifies the technical characteristics and test methods for radio equipment intended for data and speech transmission in the land mobile service, focusing on devices equipped with an antenna connector. This standard plays a crucial role in ensuring electromagnetic compatibility (EMC) and optimal use of the radio spectrum for professional and private communication systems using land mobile radio equipment.

The document covers the essential requirements for radio transmitters and receivers to ensure they operate effectively and without causing harmful interference with other communications devices and services. It provides guidance on the minimum performance, measurement methods, and testing conditions to ensure equipment compliance with EMC regulations.

Key Topics

• Electromagnetic Compatibility (EMC): Requirements and measurement methods to ensure radio equipment does not cause or suffer from excessive electromagnetic interference.
• Radio Spectrum Efficiency: Guidelines to optimize use of the radio spectrum, avoiding harmful interference and ensuring reliable service.
• Technical Performance Limits:
  • Frequency stability and allowable errors
  • Carrier and effective radiated power (ERP)
  • Spurious emissions and intermodulation attenuation
  • Receiver sensitivity and selectivity
  • Blocking and desensitization resistance
• Measurement Procedures: Methods for assessing compliance, including test conditions, power sources, and operation modes.
• Identification Requirements: Specifications for identifying equipment and stations where necessary, including modulation and coding guidelines.
• Test Site and Equipment: Best practices for conducting radiated and conducted measurements, including the use of anechoic chambers or open area test sites.

Applications

The guidelines set forth in SIST EN 300 113-1 V1.3.1:2003 are widely applicable in several key areas:

• Professional Mobile Radio (PMR): Used by emergency services, utilities, transportation, and security organizations to ensure robust and interference-free communication.
• Private Land Mobile Networks: Supports reliable operations for businesses and industries relying on on-site communication.
• Equipment Manufacturers: Provides a framework for designing, testing, and certifying radio products intended for the land mobile market.
• Regulatory Compliance: Laboratories and authorities use this standard for type testing and market approval according to EU regulatory directives, such as the R&TTE Directive (now RED) and the EMC Directive.
• Frequency Planning: Assists telecom authorities in planning and coordinating spectrum usage to minimize interference and maximize service quality.

Related Standards

To complement the requirements of SIST EN 300 113-1 V1.3.1:2003 and ensure a comprehensive approach to EMC and radio spectrum management, the following standards are also relevant:

• EN 300 113-2: Harmonized standard covering essential requirements under article 3.2 of the R&TTE Directive for land mobile radio equipment.
• EN 300 390: Covers radio equipment with an integral antenna.
• ETS 300 471: Addresses access protocols relevant to equipment operation.
• CEPT/ERC/DEC(97)10 & CEPT/ERC/REC 01-06: Documents mutual recognition and type approval guidance within CEPT countries.
• IEC 61000 Series: International EMC standards for electrical and electronic equipment.
• Directive 1999/5/EC (R&TTE) and EMC Directive: Legal frameworks for placing compliant radio equipment on the EU market.

Adherence to these standards ensures that radio communication equipment operates safely, efficiently, and in compliance with European laws and technical best practices for electromagnetic compatibility and radio spectrum management.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.VNLPElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and speech) and having an antenna connector; Part 1: Technical characteristics and methods of measurement33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.070.01Mobilni servisi na splošnoMobile services in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 300 113-1 Version 1.3.1SIST EN 300 113-1 V1.3.1:2003en01-december-2003SIST EN 300 113-1 V1.3.1:2003SLOVENSKI
STANDARD
ETSIEN300113-1V1.3.1(2001-03)EuropeanStandard(Telecommunicationsseries)ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Landmobileservice;Radioequipmentintendedforthetransmissionofdata(andspeech)andhavinganantennaconnector;Part1:TechnicalcharacteristicsandmethodsofmeasurementSIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)2ReferenceREN/ERM-RP02-040-1Keywordsantenna,data,mobile,PMR,radio,speechETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)3ContentsIntellectualPropertyRights.8Foreword.8Introduction.81Scope.102References.113Definitions,symbolsandabbreviations.113.1Definitions.113.2Symbols.123.3Abbreviations.134General.134.1Selectionofequipmentfortestingpurposes.144.2Mechanicalandelectricaldesign.144.2.1General.144.2.2Controls.144.2.3Transmittershut-offfacility.144.2.4Marking.144.3Interpretationofthemeasurementresults.154.4Testingusingbitstreamsormessages.155Technicalcharacteristics.155.1Transmitterparameterlimits.155.1.1Frequencyerror.155.1.2Carrierpower(conducted).165.1.3Effectiveradiatedpower.165.1.4Adjacentchannelpower.175.1.5Spuriousemissions.175.1.6Intermodulationattenuation.175.1.7Transmitterattacktime.175.1.8Transmitterreleasetime.185.1.9Transientbehaviourofthetransmitter.185.1.9.1Timedomainanalysisofpowerandfrequency.185.1.9.2Adjacentchanneltransientpower.185.2Receiverparameterlimits.185.2.1Maximumusablesensitivity(dataormessages,conducted).185.2.2Averageusablesensitivity(dataormessages,fieldstrength).185.2.3Errorbehaviourathighinputlevels.195.2.4Co-channelrejection.195.2.5Adjacentchannelselectivity.195.2.6Spuriousresponserejection.195.2.7Intermodulationresponserejection.195.2.8Blockingordesensitization.195.2.9Spuriousradiations.205.3Duplexoperation-receiverlimits.205.3.1Receiverdesensitizationandmaximumusablesensitivity(withsimultaneoustransmissionandreception).205.3.2Receiverspuriousresponserejection(withsimultaneoustransmissionandreception).206Testconditions,powersourcesandambienttemperatures.216.1Normalandextremetestconditions.216.2Testpowersource.216.3Normaltestconditions.216.3.1Normaltemperatureandhumidity.216.3.2Normaltestpowersource.216.3.2.1Mainsvoltage.21SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)46.3.2.2Regulatedlead-acidbatterypowersourcesusedonvehicles.216.3.2.3Otherpowersources.226.4Extremetestconditions.226.4.1Extremetemperatures.226.4.2Extremetestsourcevoltages.226.4.2.1Mainsvoltage.226.4.2.2Regulatedlead-acidbatterypowersourcesonvehicles.226.4.2.3Powersourcesusingothertypesofbatteries.226.4.2.4Otherpowersources.226.5Procedurefortestsatextremetemperatures.236.5.1Procedureforequipmentdesignedforcontinuousoperation.236.5.2Procedureforequipmentdesignedforintermittentoperation.237Generalconditions.237.1Arrangementsfortestsignalsappliedtothereceiverinput.237.2Receivermuteorsquelchfacility.237.3Normaltestsignals(wantedandunwantedsignals).247.4Encoderforreceivermeasurements.247.5Transceiverdatainterface.257.6Impedance.257.7Artificialantenna.257.8Testsofequipmentwithaduplexfilter.257.9Facilitiesforaccess.257.9.1Analogueaccess.257.9.2Testpointsforbitstreammeasurements.267.9.3Couplingarrangements.267.9.3.1Arrangementsformeasurementswithcontinuousbitstreams.267.9.3.2Arrangementsformeasurementswithmessages.267.10Testsiteandgeneralarrangementsformeasurementsinvolvingtheuseofradiatedfields.267.11Modesofoperationofthetransmitter.278Methodsofmeasurementfortransmitterparameters.278.1Frequencyerror.278.1.1Definition.278.1.2Methodofmeasurement.278.2Carrierpower(conducted).278.2.1Definitions.288.2.2Methodofmeasurement.288.3Effectiveradiatedpower(fieldstrength).288.3.1Definition.288.3.2Methodofmeasurement.298.4Maximumpermissiblefrequencydeviation.318.4.1Definition.318.4.2Methodofmeasurement.318.5Adjacentchannelpower.328.5.1Definition.328.5.2Methodofmeasurement.328.6Spuriousemissions.338.6.1Definition.338.6.2Methodofmeasuringthepowerlevel.338.6.3Methodofmeasuringtheeffectiveradiatedpower.348.7Intermodulationattenuation.368.7.1Definition.368.7.2Methodofmeasurement.368.8Transmitterattacktime.378.8.1Definition.378.8.2Methodofmeasurement.378.9Transmitterreleasetime.388.9.1Definition.388.9.2Methodofmeasurement.388.10Transientbehaviourofthetransmitter.388.10.1Definitions.39SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)58.10.2Timings,frequenciesandpowers.408.10.3Methodsofmeasurement.448.10.3.1Timedomainmeasurementsofpowerandfrequency.448.10.3.2Testarrangementandcharacteristicsofthetestdiscriminator.448.10.3.3Adjacentchanneltransientpowermeasurements.458.10.3.4Characteristicsoftheadjacentchanneltransientpowermeasuringdevice.469Methodsofmeasurementforreceiverparameters.469.1Maximumusablesensitivity(dataormessages,conducted).469.1.1Definition.469.1.2Methodofmeasurementwithcontinuousbitstreams.469.1.3Methodofmeasurementwithmessages.479.2Averageusablesensitivity(dataormessages,fieldstrength).489.3Levelofthewantedsignalforthedegradationmeasurements(dataormessages).489.4Errorbehaviourathighinputlevels.489.4.1Definition.489.4.2Methodofmeasurementwithcontinuousbitstreams.489.4.3Methodofmeasurementwithmessages.499.5Co-channelrejection.499.5.1Definition.499.5.2Methodofmeasurementwithcontinuousbitstreams.509.5.3Methodofmeasurementwithmessages.519.6Adjacentchannelselectivity.529.6.1Definition.529.6.2Methodofmeasurementwithcontinuousbitstreams.529.6.3Methodofmeasurementwithmessages.539.7Spuriousresponserejection.549.7.1Definition.549.7.2Introductiontothemethodofmeasurement.559.7.3Methodofsearchoverthe"limitedfrequencyrange".559.7.4Methodofmeasurementwithcontinuousbitstreams.569.7.5Methodofmeasurementwithmessages.579.8Intermodulationresponserejection.589.8.1Definition.589.8.2Methodofmeasurementwithcontinuousbitstreams.589.8.3Methodofmeasurementwithmessages.599.9Blockingordesensitization.609.9.1Definition.609.9.2Methodofmeasurementwithcontinuousbitstreams.609.9.3Methodofmeasurementwithmessages.619.10Spuriousradiations.639.10.1Definition.639.10.2Methodofmeasuringthepowerlevel.639.10.3Methodofmeasuringtheeffectiveradiatedpower.6410Duplexoperation.6610.1Receiverdesensitization(withsimultaneoustransmissionandreception).6610.1.1Definition.6610.1.2Desensitizationmeasuredwithcontinuousbitstreams.6610.1.2.1Methodofmeasurementwhentheequipmenthasaduplexfilter.6610.1.2.2Methodofmeasurementwhentheequipmenthastooperatewithtwoantennas.6710.1.3Desensitizationmeasuredwithmessages.6810.1.3.1Methodofmeasurementwhentheequipmenthasaduplexfilter.6810.1.3.2Methodofmeasurementwhentheequipmenthastooperatewithtwoantennas.6910.2Receiverspuriousresponserejection(withsimultaneoustransmissionandreception).7010.2.1Definition.7010.2.2Methodofmeasurement.70SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)611Measurementuncertainty.71AnnexA(normative):Radiatedmeasurement.72A.1Testsitesandgeneralarrangementsformeasurementsinvolvingtheuseofradiatedfields.72A.1.1AnechoicChamber.72A.1.2AnechoicChamberwithaconductivegroundplane.73A.1.3OpenAreaTestSite(OATS).74A.1.4Testantenna.75A.1.5Substitutionantenna.76A.1.6Measuringantenna.76A.2Guidanceontheuseofradiationtestsites.76A.2.1Verificationofthetestsite.76A.2.2PreparationoftheEUT.76A.2.3PowersuppliestotheEUT.76A.2.4Volumecontrolsettingforanaloguespeechtests.77A.2.5Rangelength.77A.2.6Sitepreparation.78A.3Couplingofsignals.78A.3.1General.78A.3.2DataSignals.78A.3.3Speechandanaloguesignals.78A.3.3.1Acousticcouplerdescription.79A.3.3.2Calibration.79AnnexB(normative):Specificationforsomeparticularmeasurementarrangements.80B.1Powermeasuringreceiverspecification.80B.1.1IFfilter.80B.1.2Attenuationindicator.81B.1.3rmsvalueindicator.81B.1.4Oscillatorandamplifier.81B.2Spectrumanalyserspecification.82B.3Integratingandpowersummingdevice.82AnnexC(normative):Identification.83C.1Scope.83C.2General.83C.3Positionoftheidentificationcode.84C.3.1Basestations.84C.3.1.1Systemwithoutwindows.84C.3.1.2Systemswithwindows.84C.3.2Mobilestations.84C.4Bitratesandmodulations.85C.5Formatoftheidentification.86C.6Synchronization.86C.7Codeandblocklength.87C.8Contentsoftheidentificationblock.87C.8.1Header.87C.8.2Country/regionalcode.88C.8.3NationalInformation.89C.8.3.1Fielddescription.89C.8.3.2Fieldsizeoptions.89C.8.3.3Optionsfortheorganizationofthefields.90C.8.3.4Examplesofuser/systeminformationusage.90SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)7C.9Combinations.91C.9.1Listofpossiblecombinations.91C.9.2Relationsbetweencountry/regionalcodeandallowedcombinations.91C.9.3InterpretationofthefieldsoftheIDblock.92AnnexD(normative):Graphicalrepresentationoftheselectionofequipmentandfrequenciesfortesting.93D.1Testsonasinglesample.93D.2Testsandsamplesneededwhentheswitchingrangeisasubsetofthealignmentrange.94D.3Testsandsamplesforafamilyofequipmentwherethealignmentrangeisasubsetofthetotaloperatingfrequencyrange.95D.3.1Testscenario1.95D.3.2Testscenario2.96AnnexE(informative):Informationonmodulation,codingandformat.97Bibliography.98History.99SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)8IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeElectromagneticcompatibilityandRadiospectrumMatters(ERM).Thepresentdocumentispart1ofamulti-partdeliverablecoveringtheLandmobileservice;Radioequipmentintendedforthetransmissionofdata(andspeech)andhavinganantennaconnector,asidentifiedbelow:Part1:"Technicalcharacteristicsandmethodsofmeasurement";Part2:"HarmonizedENcoveringessentialrequirementsunderarticle3.2oftheR&TTEDirective".NationaltranspositiondatesDateofadoptionofthisEN:9March2001DateoflatestannouncementofthisEN(doa):30June2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31December2001DateofwithdrawalofanyconflictingNationalStandard(dow):31December2001IntroductionThepresentdocumentisintendedtospecifytheminimumperformanceandthemethodsofmeasurementofradioequipmentforuseinthelandmobileserviceasspecifiedinthescope.ThepresentdocumentisbaseduponETS300113Edition2.Thisisageneralstandardwhichmaybeoverriddenorcomplementedbyspecificstandardsaddressingspecificapplications.Itappliestoequipmentdesignedtooperatewithintheprofessionalmobileradioserviceandtotheassociatedfrequencyplanning.Equipmentsimilartothatcoveredbythepresentdocument,buthavinganintegralantennaiscoveredbyEN300390[2](fordetails,seethescopeofthepresentdocumentaswellasthescopeofEN300390[2]).AccessprotocolsforequipmentcoveredbythepresentdocumentarethesubjectofotherETSIstandardssuchasETS300471.SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)9Channelseparations,maximumtransmitteroutputpower/effectiveradiatedpower,classoftransmitterintermodulationattenuationandtheinclusionofautomatictransmittershut-offfacilitymayallbeconditionsrelatingtotheissueofalicencebytheappropriateadministration.AnnexA:isnormativeandprovidesadditionalinformationconcerningradiatedmeasurements.AnnexB:isnormativeandgivestherequirementsforequipmenttobeusedforthemeasurementsofadjacentchannelpower.AnnexC:isnormativeandpresentsthetechnicalcharacteristicstobefulfilled,whenrequiredbytheappropriatenationalregulatoryauthority,fortheidentificationofstationsforprofessionalmobileradiosystems,thatdonotcomplywithothersystemprotocols(e.g.trunkingprotocols);itistheresponsibilityofthemanufacturertoensurethatthemodulationthathehaschosenfortheidentification,inaccordancewiththetablesofthisannexfulfilstherequirementscorrespondingtothechannelswheretheequipmentisdesignedtooperate,asspecifiedinthemainbodyofthepresentdocument.Thetablesofthisannexareexpectedtobeupdatedregularlyinordertoreflecttheprogressaccomplishedinthefieldofmobiledatatransmissions.AnnexD:isinformativeandgivesagraphicrepresentationcorrespondingtotheselectionofequipmentfortestingpurposes(itisbasedonEN300793[3]).AnnexE:isinformativeandprovidesguidanceconcerningthetechnicalcharacteristicsofthemodulation,codingandformat.Clause5providestheappropriatelimits.Theselimitshavebeenchosentoensureanacceptablegradeofserviceandtominimizeharmfulinterferencetootherequipmentandservices.Theyarebasedontheinterpretationofthemeasurementresultsdescribedinclause4.3.ProvisionfortheplacingonthemarketofradioequipmentinEUMemberStatescanbefoundintheR&TTEDirective(Directive1999/5/EC).ItcanalsobenotedthatsomeoftheparametersconsideredasessentialundertheR&TTEDirectivehadalreadybeenlistedasessentialundertheEMCDirective.ThepresentdocumentmayalsobeusedinCEPTCountriesthatarenotEUMemberStates.ForthebenefitoftheseCountries,mechanismsformutualrecognitionoftypeapprovalhavebeenidentifiedinCEPT/ERC/DEC(97)10.Alternatively,anotherapproachmaybeusedinCountriesthathavenotimplementedthisDecision:typetestmeasurementsperformedinanaccreditedtestlaboratoryinonecountrywouldbeacceptedbytheAdministrationinanothercountryprovidedthatthenationalregulatoryrequirementsaremet(CEPT/ERC/REC01-06).DecisionCEPT/ERC/DEC(97)10alsoaddressesissuesrelatedtototalqualitymanagement.Thepresentdocumentmay,inparticular,beusedbyaccreditedtestlaboratoriesfortheassessmentoftheperformanceoftheequipment.Theperformanceoftheequipment,inthecaseofconformityassessmentmeasurements,shallberepresentativefortheperformanceofthecorrespondingproductionmodel.Inordertoavoidanyambiguityinthatassessment,thepresentdocumentcontainsgeneralinstructions(clause4),conditions(clauses6and7)andmethodsofmeasurement(clauses8,9and10).Thepresentdocumentwasdraftedontheassumptionthatifequipmentavailableonthemarketisrequiredtobechecked,itshouldbetestedinaccordancewiththemethodsofmeasurementspecifiedinthepresentdocument.SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)101ScopeThepresentdocumentcoverstheminimumcharacteristicsconsiderednecessaryinordertoavoidharmfulinterferenceandtomakeacceptableuseoftheavailablefrequencies.Itdoesnotnecessarilyincludeallthecharacteristicswhichmayberequiredbyauser,nordoesitnecessarilyrepresenttheoptimumperformanceachievable.Thepresentdocumentappliestoconstantenvelopeanglemodulationsystemsforuseinthelandmobileservice,usingtheavailablebandwidth,operatingonradiofrequenciesbetween30MHzand1GHz,withchannelseparationsof12,5kHz,20kHzand25kHz,intendedfordatatransmissions.Itappliestodigitalandcombinedanalogueanddigitalradioequipmentwithaninternalorexternalantennaconnectorintendedforthetransmissionofdataand/orspeech.Theparticulartypeofmodulationwillbechosenbythemanufacturer,althoughitisrecognizedthatinsomecountriesnationallegislationmaylimittheuseofcertaincodestructures/dataformats.Thetechnicalcharacteristicsgiveninthepresentdocumentareindependentofdataratebutmayinpracticelimitthemaximumdatarateachievable.Futureeditionsofthepresentdocumentmaybepreparedtoallowcomplexmodulationmethods,togetherwiththeirappropriatelimits,foruseathigherbitrates.Inthepresentdocumentdifferentrequirementsaregivenforthedifferentradiofrequencybands,channelseparations,etc.whereappropriate.Inthepresentdocument,datatransmissionsystemsaredefinedassystemswhichtransmitand/orreceivedata.Theequipmentcomprisesatransmitterandassociatedencoderandmodulatorand/orareceiverandassociateddemodulatoranddecoder.Thetypesofequipmentcoveredbythepresentdocumentareasfollows:-basestation(equipmentfittedwithanantennasocket,intendedforuseinafixedlocation);-mobilestation(equipmentfittedwithanantennasocket,normallyusedinavehicleorasatransportable);-andthosehandportablestations:a)fittedwithanantennasocket;orb)withoutanexternalantennasocket(integralantennaequipment),butfittedwithapermanentinternaloratemporaryinternal50RadioFrequency(RF)connectorwhichallowsaccesstothetransmitteroutputandthereceiverinput.HandportableequipmentwithoutanexternalorinternalRFconnectorandwithoutthepossibilityofhavingatemporaryinternal50RFconnectorisnotcoveredbythepresentdocument(integralantennaequipmentiscoveredbyEN300390[2]fordetails,seethecorrespondingscope).AdditionalstandardsorspecificationsmayalsoberequiredforequipmentsuchasthatintendedforconnectiontothePublicSwitchedTelephoneNetwork(PSTN),ordatanetworks.Requirementstobefulfilledbyequipmentdesignedtomeetseveralstandardscanbefoundinclause4.SIST EN 300 113-1 V1.3.1:2003

ETSIETSIEN300113-1V1.3.1(2001-03)112ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublicationand/oreditionnumberorversionnumber)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300086(allparts):"ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;RadioequipmentwithaninternalorexternalRFconnectorintendedprimarilyforanaloguespeech".[2]ETSIEN300390(V1.2.1):"ElectromagneticcompatibilityandRadiospectrumMatters(ERM);LandMobileService;Radioequipmentintendedforthetransmissionofdata(andspeech)andusinganintegralantenna".[3]ETSIEN300793:"ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Landmobileservice;Presentationofequipmentfortypetesting".[4]ETSIETR028:"RadioEquipmentandSystems(RES);Uncertaintiesinthemeasurementofmobileradioequipmentcharacteristics".[5]ETSIETR273(allparts):"ElectromagneticcompatibilityandRadiospectrumMatters(ERM);Improvementofradiatedmethodsofmeasurement(usingtestsites)andevaluationofthecorrespondingmeasurementuncertainties".[6]ITU-TRecommendationO.153:"Basicparametersforthemeasurementoferrorperformanceatbitratesbelowtheprimaryrate".[7]ANSIC63.5(1988):"AmericanNationalStandardforCalibrationofAntennasUsedforRadiatedEmissionMeasurementsinElectromagneticInterference(EMI)ControlCalibrationofAntennas(9kHzto40GHz)".[8]IEC60489-3(1988):"Methodsofmeasurementforradioequipmentusedinthemobilesservices.Part3:ReceiversforA3EorF3Eemissions".3Definitions,symbolsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:basestation:equipmentfittedwithanantennasocket,forusewithanexternalantenna,andintendedforuseinafixedlocationmo
...