Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011)

This International Standard prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation. The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical symbols is according to ISO 3864-3. This International Standard is applicable to all locations where safety issues related to people need to be addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of this International Standard and of the ISO 3864 series. This International Standard specifies the safety sign originals that may be scaled for reproduction and application purposes.

Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO 7010:2011)

Diese Internationale Norm legt Sicherheitszeichen fest, die für den Zweck der Unfallverhütung, des Brandschutzes, des Schutzes vor Gesundheitsgefährdungen und für Fluchtwege angewendet werden.
Die Form und Farbe der Sicherheitszeichen entsprechen ISO 3864-1 und die Gestaltung der graphischen Symbole entspricht ISO 3864-3.
Diese Internationale Norm gilt für alle Stellen und Bereiche, an denen Sicherheitsfragen für Personen geregelt werden müssen. Sie gilt nicht für die Zeichengebung im Eisenbahn-, Straßen-, Binnenschiffs-, See- und Luftverkehr; allgemein gesagt, nicht in solchen Bereichen, die von dieser Internationalen Norm und der Normen der Reihe ISO 3864 abweichenden Regelungen unterliegen.
Diese Internationale Norm legt die Sicherheitszeichen-Urbilder fest, die für die Reproduktion und Anwendung in der Größe angepasst werden können.

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés (ISO 7010:2011)

L'ISO 7010:2011 prescrit les signaux de sécurité à utiliser dans le cadre de la prévention des accidents, de la lutte contre l'incendie, de l'information sur les risques d'atteinte à la santé et de l'évacuation d'urgence.
La forme et la couleur de chaque signal de sécurité sont conformes à l'ISO 3864-1 et la conception des symboles graphiques est conforme à l'ISO 3864-3.
L'ISO 7010:2011 s'applique dans tous les lieux et secteurs où des questions relatives à la sécurité des personnes sont susceptibles de se poser. Elle n'est toutefois pas applicable à la signalisation utilisée dans le trafic ferroviaire, routier, fluvial, maritime et aérien, ni d'une manière générale, aux secteurs qui sont soumis à une réglementation pouvant différer en certains points de l'ISO 7010:2011 et de l'ISO 3864.
L'ISO 7010:2011 spécifie des originaux de signaux de sécurité qui peuvent être réduits ou agrandis pour des besoins de reproduction et d'application.

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki (ISO 7010:2011)

Ta mednarodni standard določa opozorilne znake za preprečevanje nesreč, zaščito pred požari, informacije o nevarnostih za zdravje in zasilno evakuacijo. Oblika in barva posameznega varnostnega znaka sta skladni s standardom ISO 3864-1, oblika grafičnih simbolov pa s standardom ISO 3864-3. Ta mednarodni standard se uporablja za vse lokacije, za katere je treba obravnavati vprašanja varnosti, povezana z ljudmi. Vendar se ne uporablja za signaliziranje, ki se uporablja za železniški, cestni, rečni, pomorski in letalski promet ter na splošno za tiste sektorje, za katere veljajo predpisi, ki se lahko razlikujejo v nekaterih točkah tega mednarodnega standarda in serije standardov ISO 3864. Ta mednarodni standard določa izvirnik varnostnega znaka, katerega velikost se lahko spremeni za namene razmnoževanja in uporabe.

General Information

Status
Withdrawn
Public Enquiry End Date
09-Apr-2012
Publication Date
09-Sep-2012
Withdrawal Date
14-Apr-2020
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Apr-2020
Due Date
07-May-2020
Completion Date
15-Apr-2020

Relations

Buy Standard

Standard
SIST EN ISO 7010:2012 - BARVNI ZNAKI, natisnjeno za čitalnico
English language
132 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7010:2012
01-oktober-2012
1DGRPHãþD
SIST ISO 7010:2010
SIST ISO 7010:2010/Amd 1:2010
SIST ISO 7010:2010/Amd 2:2010
SIST ISO 7010:2010/Amd 3:2010
SIST ISO 7010:2010/Amd 4:2010

*UDILþQLVLPEROL9DUQRVWQHEDUYHLQYDUQRVWQL]QDNL5HJLVWULUDQLYDUQRVWQL]QDNL

,62

Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO

7010:2011)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen (ISO 7010:2011)

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité

enregistrés (ISO 7010:2011)
Ta slovenski standard je istoveten z: EN ISO 7010:2012
ICS:
01.080.10 6LPEROL]DMDYQRREYHãþDQMH Public information symbols.
=QDNL7DEOH2]QDþEH Signs. Plates. Labels
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
SIST EN ISO 7010:2012 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 7010:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 7010:2012
EUROPEAN STANDARD
EN ISO 7010
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2012
ICS 01.080.20; 01.080.10
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs (ISO 7010:2011)

Symboles graphiques - Couleurs de sécurité et signaux de Graphische Symbole - Sicherheitsfarben und

sécurité - Signaux de sécurité enregistrés (ISO 7010:2011) Sicherheitszeichen - Registrierte Sicherheitszeichen (ISO

7010:2011)
This European Standard was approved by CEN on 23 June 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7010:2012
EN ISO 7010:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 7010:2012
EN ISO 7010:2012 (E)
Foreword

The text of ISO 7010:2011 has been prepared by Technical Committee ISO/TC 145 “Graphical symbols” of

the International Organization for Standardization (ISO) and has been taken over as EN ISO 7010:2012.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at

the latest by January 2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 7010:2011 has been approved by CEN as a EN ISO 7010:2012 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 7010:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 7010:2012
INTERNATIONAL ISO
STANDARD 7010
Second edition
2011-06-01
Graphical symbols — Safety colours and
safety signs — Registered safety signs
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
Reference number
ISO 7010:2011(E)
ISO 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2011

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Contents Page

Foreword ............................................................................................................................................................ iv

Introduction ......................................................................................................................................................... v

1 Scope ...................................................................................................................................................... 1

2 Normative references ............................................................................................................................ 1

3 Terms and definitions ........................................................................................................................... 2

4 Referents and categorization of safety signs ..................................................................................... 2

4.1 General ................................................................................................................................................... 2

4.2 Referent (safety meaning) .................................................................................................................... 3

4.3 Categorization of safety signs ............................................................................................................. 6

5 Registered safety signs ........................................................................................................................ 6

Bibliography .................................................................................................................................................... 124

© ISO 2011 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 7010 was prepared by Technical Committee ISO/TC 145, Graphical symbols, Subcommittee SC 2, Safety

identification, signs, shapes, symbols and colours.

This second edition cancels and replaces the first edition (ISO 7010:2003), as well as ISO 6309:1987. It also

incorporates the Amendments
ISO 7010:2003/Amd. 1:2006,
ISO 7010:2003/Amd. 2:2007,
ISO 7010:2003/Amd. 3:2007,
ISO 7010:2003/Amd. 4:2009,
ISO 7010:2003/Amd. 5:2010,
ISO 7010:2003/Amd. 6:2010,
ISO 7010:2003/Amd. 7:2010, and
ISO 7010:2003/Amd. 8:2011.
iv © ISO 2011 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Introduction

There is a need to standardize a system of giving safety information that relies as little as possible on the use

of words to achieve understanding.

Continued growth in international trade, travel and mobility of labour requires a common method of

communicating safety information.
Lack of standardization may lead to confusion and the risk of accidents.

The use of standardized safety signs does not replace proper work methods, instructions and accident

prevention training or measures. Education is an essential part of any system that provides safety information.

The safety signs are intended for use only where there is a risk to people. They may appear in safety signage

in workplaces and public areas, safety manuals and notices, product labelling and escape and evacuation

plans, as appropriate.

This International Standard is intended to be used by all Technical Committees within ISO charged with

developing specific safety signing for their industry, to ensure that there is only one safety sign for each safety

meaning. It is also intended that this International Standard be revised regularly to include safety signs as they

are standardized by ISO, and which conform to the design principles given in ISO 3864.

The safety signs in this International Standard have been validated by ISO/TC 145/SC 2 according to

procedures of standardization current at the time of publication.

NOTE 1 Some countries' statutory regulations may differ in some respects from those given in this International

Standard.

NOTE 2 Information on procedures, criteria of acceptability, safety sign templates and application of safety signs are

given on the website: http://www.iso.org/tc145/sc2.
© ISO 2011 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 7010:2012
---------------------- Page: 12 ----------------------
SIST EN ISO 7010:2012
INTERNATIONAL STANDARD ISO 7010:2011(E)
Graphical symbols — Safety colours and safety signs —
Registered safety signs

IMPORTANT — The colours represented in the electronic file of this International Standard can be

neither viewed on screen nor printed as true representations. Although the copies of this International

Standard printed by ISO have been produced to correspond (with an acceptable tolerance as judged

by the naked eye) to the requirements of ISO 3864-4, it is not intended that these printed copies be

used for colour matching. Instead consult ISO 3864-4 which provides colorimetric and photometric

properties together with, as a guideline, references from colour order systems.
1 Scope

This International Standard prescribes safety signs for the purposes of accident prevention, fire protection,

health hazard information and emergency evacuation.

The shape and colour of each safety sign are according to ISO 3864-1 and the design of the graphical

symbols is according to ISO 3864-3.

This International Standard is applicable to all locations where safety issues related to people need to be

addressed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air

traffic and, in general, to those sectors subject to a regulation which may differ with regard to certain points of

this International Standard and of the ISO 3864 series.

This International Standard specifies the safety sign originals that may be scaled for reproduction and

application purposes.
2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

ISO 3864-1 Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs

and safety markings

ISO 3864-3, Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical

symbols for use in safety signs

ISO 3864-4, Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric

properties of safety sign materials
ISO 17724, Graphical symbols — Vocabulary
© ISO 2011 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 17724 and the following apply.

3.1
image content

written description of the elements of a graphical symbol or safety sign and their relative disposition

3.2
referent
idea or object that a graphical symbol is intended to represent
3.3
safety sign

sign giving a general safety message, obtained by a combination of a colour and geometric shape and which,

by the addition of a graphical symbol, gives a particular safety message
3.4
safety sign original

safety sign with which a referent, a graphical representation and a description of the application are

associated
3.5
supplementary sign

sign that is supportive of another sign and the main purpose of which is to provide additional clarification

4 Referents and categorization of safety signs
4.1 General

The summaries in 4.2 and 4.3 are provided to facilitate the search for registered safety signs.

This International Standard will be maintained electronically through the use of a database. The indexes of

this database will be used in these summaries as search engines with each registered safety sign having a

unique reference number .
1) The registered safety signs can be found at http://cdb.iso.org.
2 © ISO 2011 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
4.2 Referent (safety meaning)

Table 1 gives the list of referents in alphabetical order and provides the safety sign functional reference

number.
Table 1 — Summary of referents in alphabetical order
Referent
Functional reference number
(safety meaning)
Automated external heart defibrillator E010
Automatic start-up, warning W018
Battery charging, warning W026
Biological hazard, warning W009
Break to obtain access E008
Connect an earth terminal to the ground M005
Corrosive substance, warning W023
Counterrotating rollers, warning W025
Crushing, warning W019
Crushing of hands, warning W024
Disconnect before carrying out maintenance or repair M021
Disconnect mains plug from electrical outlet M006
Doctor E009
Do not alter the state of the switch P031
Do not extinguish with water P011
Do not obstruct P023
Do not tie knots in rope P030
Do not touch P010
Do not use for face grinding P032
Do not use for wet grinding P033
Do not use lift in the event of fire P020
Do not use this device in a bathtub, shower or water-filled reservoir P026
Do not use this incomplete scaffold P025
Do not use this lift for people P027
Do not use with hand-held grinding machine P034
Do not walk or stand here P024
Do not wear gloves P028
Drop (fall), warning W008
Electricity, warning W012
Emergency exit (left hand) E001
Emergency exit (right hand) E002
Emergency telephone E004
Emergency window with escape ladder E016
© ISO 2011 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 1 (continued)
Referent
Functional reference number
(safety meaning)
Evacuation assembly point E007
Explosive material, warning W002
Eyewash station E011
Fire alarm call point F005
Fire emergency telephone F006
Fire extinguisher F001
Firefighting equipment, collection of F004
Fire hose reel F002
Fire ladder F003
First aid E003
Flammable material, warning W021
Floor-level obstacle, warning W007
Forklift trucks and other industrial vehicles, warning W014
General mandatory action sign M001
General prohibition sign P001
General warning sign W001
Guard dog, warning W013
Hot surface, warning W017
Laser beam, warning W004
Low temperature/freezing conditions, warning W010
Magnetic field, warning W006
No access for forklift trucks and other industrial vehicles P006
No access for people with active implanted cardiac devices P007
No access for people with metallic implants P014
No activated mobile phones P013
No dogs P021
No eating or drinking P022
No heavy load P012
No metallic articles or watches P008
No open flame; Fire, open ignition source and smoking prohibited P003
No photography P029
No pushing P017
No reaching in P015
No sitting P018
No smoking P002
No stepping on surface P019
No thoroughfare P004
4 © ISO 2011 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 1 (continued)
Referent
Functional reference number
(safety meaning)
Non-ionizing radiation, warning W005
Not drinking water P005
Opaque eye protection must be worn M007
Optical radiation, warning W027
Overhead load, warning W015
Overhead obstacle, warning W020
Oxidizing substance, warning W028
Pressurized cylinder, warning W029
Protect infants' eyes with opaque eye protection M025
Radioactive material or ionizing radiation, warning W003
Refer to instruction manual/booklet M002
Rescue window E017
Safety shower E012
Sharp element, warning W022
Slippery surface, warning W011
Stretcher E013
Toxic material, warning W016
Turn anticlockwise to open E018
Turn clockwise to open E019
Use barrier cream M022
Use footbridge M023
Use handrail M012
Use protective apron M026
Use this walkway M024
Wash your hands M011
Wear ear protection M003
Wear eye protection M004
Wear a face shield M013
Wear head protection M014
Wear high-visibility clothing M015
Wear a mask M016
Wear protective clothing M010
Wear protective gloves M009
Wear respiratory protection M017
Wear safety belts M020
Wear safety footwear M008
Wear a safety harness M018
Wear a welding mask M019
© ISO 2011 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
4.3 Categorization of safety signs
Safety signs are categorized according to their function as follows:

 E is the category for signs indicating an evacuation route, the location of safety equipment or a safety

facility, or a safety action (safe condition signs);
 F is the category for fire equipment signs;
 M is the category for mandatory action signs;
 P is the category for prohibition signs;
 W is the category for warning signs.

Table 2 summarizes the registered safety signs in terms of safety sign category in accordance with

ISO 3864-1.
5 Registered safety signs

Tables 3 to 7 give safety sign originals in a uniform 70 mm size with corner marks to enable accurate

enlargement and reduction scaling. The sign illustrations are shown without borders in order to allow for

consistent reproduction scaling, though a border can be useful to achieve a luminance contrast between the

safety sign and its background when mounted or displayed. The safety signs should be reproduced exactly as

shown in Tables 3 to 7. However some degree of graphical modification is permitted when cultural differences

or special application formats need to be considered, provided the original meaning is retained and

comprehension of the safety sign is maintained. Consistent reproduction and use of these safety signs will

lead to a progressively improved degree of comprehension at the international level.

In cases where the orientation of the graphical symbol is not essential to the meaning of the safety sign, the

graphical symbol may be reproduced in a mirrored form. For prohibition signs, it is essential that the

prohibition bar does not obscure significant details of the graphical symbol.

NOTE The graphical symbol is the complete image containing all the graphical symbol elements as shown in the

registered safety sign.

Where a registered safety sign is not available to indicate a particular desired meaning, the meaning shall be

obtained either by developing a new safety sign following the design principles of ISO 3864-1 and ISO 3864-3

or by using the appropriate general sign (ISO 7010-M001, -P001, -W001), together with supplementary safety

information.

Tables 3 to 7 present the safety sign originals according to their category as follows:

 E Signs indicating an evacuation route, the location of safety equipment
or a safety facility, or a safety action (safe condition signs) see Table 3
 F Fire equipment signs see Table 4
 M Mandatory action signs see Table 5
 P Prohibition signs see Table 6
 W Warning signs see Table 7
Tables 3 to 7 also give a description of the application of each safety sign.
6 © ISO 2011 – All rights reserved
---------------------- Page: 18 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 — Summary of all safety signs
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign
Reference number E001 F001 M001 P001 W001

Referent Emergency exit Fire extinguisher General mandatory General prohibition General warning

(left hand) action sign sign sign
Safety sign
Reference number E002 F002 M002 P002 W002
Referent Emergency exit Fire hose reel Refer to instruction No smoking Warning;
(right hand) manual/booklet Explosive material
Safety sign
Reference number E003 F003 M003 P003 W003
Referent First aid Fire ladder Wear ear protection No open flame; Warning;
Fire, open ignition Radioactive material
source and smoking or ionizing radiation
prohibited
Safety sign
Reference number E004 F004 M004 P004 W004
Referent Emergency Collection of Wear eye protection No thoroughfare Warning;
telephone firefighting Laser beam
equipment
Safety sign withdrawn
Reference number E005 F005 M005 P005 W005

Referent Direction, arrow Fire alarm call point Connect an earth Not drinking water Warning;

(90° increments), terminal to the Non-ionizing
safe condition ground radiation
© ISO 2011 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign withdrawn
Reference number E006 F006 M006 P006 W006

Referent Direction, 45° arrow Fire emergency Disconnect mains No access for forklift Warning;

(90° increments), telephone plug from electrical trucks and other Magnetic field
safe condition outlet industrial vehicles
Safety sign —
Reference number E007 — M007 P007 W007
Referent Evacuation — Opaque eye No access for people Warning;
assembly point protection must be with active implanted Floor-level obstacle
worn cardiac devices
Safety sign —
Reference number E008 — M008 P008 W008
Referent Break to obtain — Wear safety No metallic articles Warning;
access footwear or watches Drop (fall)
Safety sign — in the process
Reference number E009 — M009 — W009
Referent Doctor — Wear protective — Warning;
gloves Biological hazard
Safety sign —
Reference number E010 — M010 P010 W010
Referent Automated external — Wear protective Do not touch Warning;
heart defibrillator clothing Low temperature/
freezing conditions
8 © ISO 2011 – All rights reserved
---------------------- Page: 20 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign —
Reference number E011 — M011 P011 W011
Referent Eyewash station — Wash your hands Do not extinguish Warning;
with water Slippery surface
Safety sign —
Reference number E012 — M012 P012 W012
Referent Safety shower — Use handrail No heavy load Warning;
Electricity
Safety sign —
Reference number E013 — M013 P013 W013
Referent Stretcher — Wear a face shield No activated mobile Warning;
phones Guard dog
Safety sign in the process —
Reference number — — M014 P014 W014
Referent — — Wear head No access for people Warning;
protection with metallic Forklift trucks and
implants other industrial
vehicles
Safety sign in the process —
Reference number — — M015 P015 W015
Referent — — Wear high-visibility No reaching in Warning;
clothing Overhead load
© ISO 2011 – All rights reserved 9
---------------------- Page: 21 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign — in the process
Reference number E016 — M016 — W016
Referent Emergency window — Wear a mask — Warning;
with escape ladder Toxic material
Safety sign —
Reference number E017 — M017 P017 W017
Referent Rescue window — Wear respiratory No pushing Warning;
protection Hot surface
Safety sign —
Reference number E018 — M018 P018 W018
Referent Turn anticlockwise — Wear a safety No sitting Warning;
to open harness Automatic start-up
Safety sign —
Reference number E019 — M019 P019 W019
Referent Turn clockwise — Wear a welding No stepping on Warning;
to open mask surface Crushing
Safety sign — —
Reference number — — M020 P020 W020
Referent — — Wear safety belts Do not use lift in the Warning;
event of fire Overhead obstacle
10 © ISO 2011 – All rights reserved
---------------------- Page: 22 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign — —
Reference number — — M021 P021 W021
Referent — — Disconnect before No dogs Warning;
carrying out main- Flammable material
tenance or repair
Safety sign — —
Reference number — — M022 P022 W022
Referent — — Use barrier cream No eating or drinking Warning;
Sharp element
Safety sign — —
Reference number — — M023 P023 W023
Referent — — Use footbridge Do not obstruct Warning;
Corrosive substance
Safety sign — —
Reference number — — M024 P024 W024
Referent — — Use this walkway Do not walk or stand Warning;
here Crushing of hands
Safety sign — —
Reference number — — M025 P025 W025
Referent — — Protect infants’ eyes Do not use this Warning;
with opaque eye incomplete scaffold Counterrotating
protection rollers
© ISO 2011 – All rights reserved 11
---------------------- Page: 23 ----------------------
SIST EN ISO 7010:2012
ISO 7010:2011(E)
Table 2 (continued)
Category
E F M P W
Safety sign,
Evacuation route,
reference number
location of safety
and referent
equipment or Fire equipment Mandatory action
Prohibition signs Warning signs
safety facility, signs signs
safety action (safe
condition signs)
Safety sign — —
Reference number — — M026 P026 W026
Referent — — Use protective apron Do not use this Warning;
device in a bathtub, Battery charging
shower, or water-
filled reservoir
Safety sign — — —
Reference number — — — P027 W027
Referent — — — Do not use this lift Warning;
for people Optical radiation
Safety sign — — —
Reference number — — — P028 W028
Referent — —
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.