SIST EN ISO 7010:2020/A5:2023

Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2019/Amd 5:2022)

Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte Sicherheitszeichen - Änderung 5 (ISO 7010:2019/Amd 5:2022)

Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité enregistrés - Amendement 5 (ISO 7010:2019/Amd 5:2022)

Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki - Dopolnilo A5 (ISO 7010:2019/Amd 5:2022)

General Information

• Status: Published
• Public Enquiry End Date: 30-Nov-2022
• Publication Date: 13-Apr-2023
• ICS: 01.080.10 - Public information symbols. Signs. Plates. Labels
• ICS: 13.200 - Accident and disaster control
• Technical Committee: TRS - Technical drawings, quantities, units, symbols and graphical symbols
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Apr-2023
• Due Date: 17-Jun-2023
• Completion Date: 14-Apr-2023
• Ref Project: EN ISO 7010:2020/A5:2023 - Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2019/Amd 5:2022)

Relations

• Amends: SIST EN ISO 7010:2020 - Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2019, Corrected version 2020-06)
• Effective Date: 01-Jun-2023

Overview

EN ISO 7010:2020/A5:2023 is the CEN-adopted Amendment 5 to ISO 7010 (Graphical symbols - Safety colours and safety signs - Registered safety signs). Published March–June 2023, this amendment adds three registered safety signs to the ISO 7010 collection and updates the European implementation. The amendment was prepared by ISO/TC 145 and endorsed by CEN for mandatory national adoption by September 2023. All new signs are available on the ISO Online Browsing Platform.

Key topics and requirements

• New registered safety signs added

  • M056 – Ventilate before and during entering
    • Function: signify that a space (room, tank, container) must be ventilated before and during entry.
    • Hazard: toxic gas concentration or oxygen depletion.
    • Note: supplementary text or training is recommended because ISO 9186-1 comprehension test data are not available.
  • M057 – Ensure continuous ventilation
    • Function: signify that continuous ventilation must be ensured to prevent accumulation of hazardous emissions.
    • Note: supplementary text recommended where manuals/training do not apply.
  • M058 – Entry only with supervisor outside
    • Function: signify that entry is permitted only when a supervisor is stationed outside with a phone to call for help.
    • Hazard: occupant may be unable to exit or call for help after an accident.
    • Note: supplementary text recommended unless supplemented by instructions or training.

• Colour and image guidance

  • The amendment reiterates that electronic colour reproductions are not true colour matches; for colorimetric properties and matching guidance users should refer to ISO 3864-4.

• Conformity and publication

  • This amendment is integrated into the European standard without modification (EN ISO 7010:2020/A5:2023) and national members must implement it.

Applications and who uses it

• Workplace safety and HSE professionals: incorporate signs into confined-space entry procedures, ventilation policies, permit-to-work systems.
• Safety sign designers and manufacturers: produce compliant pictograms and supplementary text signs following registered formats.
• Facility managers & plant operators: install appropriate signage at rooms, tanks, containers and update training and emergency procedures.
• Safety auditors and trainers: ensure signage comprehension and that supplementary instructions or training accompany these signs where ISO 9186-1 data are missing.

Related standards

• ISO 7010 (base standard for registered safety signs)
• ISO 3864-4 (colour matching and colourimetric guidance)
• ISO 9186-1 (symbol comprehension testing - test data for these signs are not available)

This amendment strengthens the ISO 7010 library for graphical symbols, safety colours, and registered safety signs, particularly for ventilation and confined-space safety, aiding consistent international implementation.

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2023
Grafični simboli - Varnostne barve in varnostni znaki - Registrirani varnostni znaki
- Dopolnilo A5 (ISO 7010:2019/Amd 5:2022)
Graphical symbols - Safety colours and safety signs - Registered safety signs -
Amendment 5 (ISO 7010:2019/Amd 5:2022)
Graphische Symbole - Sicherheitsfarben und Sicherheitszeichen - Registrierte
Sicherheitszeichen - Änderung 5 (ISO 7010:2019/Amd 5:2022)
Symboles graphiques - Couleurs de sécurité et signaux de sécurité - Signaux de sécurité
enregistrés - Amendement 5 (ISO 7010:2019/Amd 5:2022)
Ta slovenski standard je istoveten z: EN ISO 7010:2020/A5:2023
ICS:
01.080.10 Simboli za javno obveščanje. Public information symbols.
Znaki. Table. Označbe Signs. Plates. Labels
13.200 Preprečevanje nesreč in Accident and disaster control
katastrof
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 7010:2020/A5
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 01.080.10; 01.080.20
English Version
Graphical symbols - Safety colours and safety signs -
Registered safety signs - Amendment 5 (ISO
7010:2019/Amd 5:2022)
Symboles graphiques - Couleurs de sécurité et signaux Graphische Symbole - Sicherheitsfarben und
de sécurité - Signaux de sécurité enregistrés - Sicherheitszeichen - Registrierte Sicherheitszeichen -
Amendement 5 (ISO 7010:2019/Amd 5:2022) Änderung 5 (ISO 7010:2019/Amd 5:2022)
This amendment A5 modifies the European Standard EN ISO 7010:2020; it was approved by CEN on 10 March 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7010:2020/A5:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
The text of ISO 7010:2019/Amd 5:2022 has been prepared by Technical Committee ISO/TC 145
"Graphical symbols” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 7010:2020/A5:2023 by Technical Committee CEN/SS F16 “Graphical symbols” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2023, and conflicting national standards
shall be withdrawn at the latest by September 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 7010:2019/Amd 5:2022 has been approved by CEN as EN ISO 7010:2020/A5:2023
without any modification.
INTERNATIONAL ISO
STANDARD 7010
Third edition
2019-07
AMENDMENT 5
2022-01
Graphical symbols — Safety colours
and safety signs — Registered safety
signs
AMENDMENT 5
Symboles graphiques — Couleurs de sécurité et signaux de sécurité —
Signaux de sécurité enregistrés
AMENDEMENT 5
Reference number
ISO 7010:2019/Amd.5:2022(E)
ISO 7010:2019/Amd.5:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 7010:2019/Amd.5:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Sta
...