SIST-TS CEN/TS 14418:2014

Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers

This CEN Technical Specification describes an index test to determine the influence ratio of freezing-thawing cycles on the flux through saturated clay geosynthetic barriers.
This test is applicable to GBR-C products without any additional sealing layers attached.

Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von Frost-Tau-Zyklen auf die Wasserdurchlässigkeit von geosynthetischen Tondichtungsbahnen

Diese Technische Spezifikation beschreibt ein Indexprüfverfahren zur Bestimmung des Einflussverhältnisses von Frost-Tau-Zyklen auf den Durchfluss durch gesättigte geosynthetische Tondichtungsbahnen.
Dieses Prüfverfahren ist auf GBR C Produkte ohne zusätzliche angebrachte Abdichtungslagen anwendbar.

Géosynthétiques bentonitiques - Méthode d'essai pour la détermination de l'influence de cycles gel/dégel sur la perméabilité des géosynthétiques bentonitiques

La présente Spécification technique décrit un essai index visant à évaluer le rapport d'influence des cycles gel/dégel sur le flux à travers des éprouvettes de géosynthétiques bentonitiques (GSB) saturés.
Cette méthode d'essai s'applique aux géosynthétiques bentonitiques sans couches d’étanchéité additionnelles.

Geosintetične ovire - Preskusna metoda za ugotavljanje vpliva ciklusov zamrzovanja-odtajanja na prepustnost geosintetičnih bentonitnih ovir

Te tehnične specifikacije CEN opisujejo preskušanje indeksa za ugotavljanje vpliva razmerja ciklusov zamrzovanja-odtajanja na pretok skozi nasičene geosintetične bentonitne ovire.
Ta preskus se uporablja za izdelke GBR-C brez dodatnih tesnilnih plasti.

General Information

• Status: Published
• Publication Date: 23-Oct-2014
• ICS: 59.080.70 - Geotextiles
• Technical Committee: ITEK - Textile and textile products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 22-Oct-2014
• Due Date: 27-Dec-2014
• Completion Date: 24-Oct-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: CEN/TS 14418:2014 - Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers

Relations

• Replaces: SIST-TS CEN/TS 14418:2006 - Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
• Effective Date: 01-Dec-2014
• Replaces: SIST-TS CEN/TS 14418:2006 - Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14418:2014
01-december-2014
1DGRPHãþD
SIST-TS CEN/TS 14418:2006
*HRVLQWHWLþQHRYLUH3UHVNXVQDPHWRGD]DXJRWDYOMDQMHYSOLYDFLNOXVRY
]DPU]RYDQMDRGWDMDQMDQDSUHSXVWQRVWJHRVLQWHWLþQLKEHQWRQLWQLKRYLU
Geosynthetic barriers - Test method for the determination of the influence of freezing-
thawing cycles on the permeability of clay geosynthetic barriers
Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von
Frost-Tau-Zyklen auf die Wasserdurchlässigkeit von geosynthetischen
Tondichtungsbahnen
Géosynthétiques bentonitiques - Méthode d'essai pour la détermination de l'influence de
cycles gel/dégel sur la perméabilité des géosynthétiques bentonitiques
Ta slovenski standard je istoveten z: CEN/TS 14418:2014
ICS:
59.080.70 Geotekstilije Geotextiles
SIST-TS CEN/TS 14418:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14418:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14418:2014

TECHNICAL SPECIFICATION
CEN/TS 14418

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2014
ICS 59.080.70 Supersedes CEN/TS 14418:2005
English Version
Geosynthetic Barriers - Test method for the determination of the
influence of freezing-thawing cycles on the permeability of clay
geosynthetic barriers
Géosynthétiques bentonitiques - Méthode d'essai pour la Geosynthetische Dichtungsbahnen - Prüfverfahren zur
détermination de l'influence de cycles gel/dégel sur la Bestimmung des Einflusses von Frost-Tau-Zyklen auf die
perméabilité des géosynthétiques bentonitiques Wasserdurchlässigkeit von geosynthetischen
Tondichtungsbahnen
This Technical Specification (CEN/TS) was approved by CEN on 21 July 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 14418:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14418:2014
CEN/TS 14418:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle .5
5 Apparatus .5
6 Reagent .6
7 Procedure .6
7.1 Specimen preparation .6
7.2 Specimen hydration .6
7.3 Specimen freezing .7
7.4 Specimen thawing .7
7.5 Repetition .7
7.6 Preparation of specimen for flux testing .7
8 Calculation and expression of results .8
8.1 Recording of data .8
8.2 Calculation and expression of results .8
9 Test Report .8

2

---------------------- Page: 4 ----------------------

SIST-TS CEN/TS 14418:2014
CEN/TS 14418:2014 (E)
Foreword
This document (CEN/TS 14418:2014) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by NBN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TS 14418:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN/TS 14418:2014
CEN/TS 14418:2014 (E)
Introduction
This Technical Specification defines a method for testing the influence of freezing-thawing cycles on the flux of
clay geosynthetic barriers. Such resistance is a requirement for many uses of these products.
The influence ratio is an indication of the behaviour of the product when exposed to repeated freezing and
thawing cycles in earth constructions. The flux of saturated clay geosynthetic barriers may increase in
consequence of repeated freezing-thawing cycles.
The Technical Specification does not purport to address all of the safety problems, if any, associated with its
use. It is the responsibili
...