Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers

This Technical Specification describes an index test to determine the influence ratio of freezing-thawing cycles on the flux through saturated clay geosynthetic barriers.
This test method is applicable to GBR-C products with no additional sealing layers attached.

Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von Frost-Tau-Zyklen auf die Wasserdurchlässigkeit von geosynthetischen Tondichtungsbahnen

Diese Technische Spezifikation beschreibt ein Indexprüfverfahren zur Bestimmung des Einflussverhältnisses von Frost-Tau-Zyklen auf den Durchfluss durch gesättigte geosynthetische Tondichtungsbahnen.
Dieses Prüfverfahren ist auf GBR C Produkte ohne zusätzliche angebrachte Abdichtungslagen anwendbar.

Géosynthétiques bentonitiques - Méthode d'essai pour la détermination de l'influence de cycles gel/dégel sur la perméabilité des géosynthétiques bentonitiques

La présente Spécification technique décrit un essai index visant à évaluer le rapport d'influence des cycles gel/dégel sur le flux à travers des éprouvettes de géosynthétiques bentonitiques (GSB) saturés.
Cette méthode d'essai s'applique aux géosynthétiques bentonitiques sans couches d’étanchéité additionnelles.

Geosintetične ovire - Preskusna metoda za ugotavljanje vpliva ciklusov zamrzovanja-odtajanja na prepustnost geosintetičnih bentonitnih ovir

Te tehnične specifikacije CEN opisujejo preskušanje indeksa za ugotavljanje vpliva razmerja ciklusov zamrzovanja-odtajanja na pretok skozi nasičene geosintetične bentonitne ovire.
Ta preskus se uporablja za izdelke GBR-C brez dodatnih tesnilnih plasti.

General Information

Status
Published
Publication Date
14-Oct-2014
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Oct-2014
Due Date
04-Oct-2015
Completion Date
15-Oct-2014

Relations

Buy Standard

Technical specification
TS CEN/TS 14418:2014
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 14418:2014
01-december-2014
1DGRPHãþD
SIST-TS CEN/TS 14418:2006
*HRVLQWHWLþQHRYLUH3UHVNXVQDPHWRGD]DXJRWDYOMDQMHYSOLYDFLNOXVRY
]DPU]RYDQMDRGWDMDQMDQDSUHSXVWQRVWJHRVLQWHWLþQLKEHQWRQLWQLKRYLU
Geosynthetic barriers - Test method for the determination of the influence of freezing-
thawing cycles on the permeability of clay geosynthetic barriers
Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung des Einflusses von
Frost-Tau-Zyklen auf die Wasserdurchlässigkeit von geosynthetischen
Tondichtungsbahnen
Géosynthétiques bentonitiques - Méthode d'essai pour la détermination de l'influence de
cycles gel/dégel sur la perméabilité des géosynthétiques bentonitiques
Ta slovenski standard je istoveten z: CEN/TS 14418:2014
ICS:
59.080.70 Geotekstilije Geotextiles
SIST-TS CEN/TS 14418:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 14418:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 14418:2014

TECHNICAL SPECIFICATION
CEN/TS 14418

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2014
ICS 59.080.70 Supersedes CEN/TS 14418:2005
English Version
Geosynthetic Barriers - Test method for the determination of the
influence of freezing-thawing cycles on the permeability of clay
geosynthetic barriers
Géosynthétiques bentonitiques - Méthode d'essai pour la Geosynthetische Dichtungsbahnen - Prüfverfahren zur
détermination de l'influence de cycles gel/dégel sur la Bestimmung des Einflusses von Frost-Tau-Zyklen auf die
perméabilité des géosynthétiques bentonitiques Wasserdurchlässigkeit von geosynthetischen
Tondichtungsbahnen
This Technical Specification (CEN/TS) was approved by CEN on 21 July 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 14418:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 14418:2014
CEN/TS 14418:2014 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Principle .5
5 Apparatus .5
6 Reagent .6
7 Procedure .6
7.1 Specimen preparation .6
7.2 Specimen hydration .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.