oSIST prEN 16759:2016

Structural Sealant Glazing Systems (SSGS)

This European Standard specifies the method to be used to verify the mechanical performance of Structural Sealant Glazing Systems.
It applies to any window/doorset or curtain walling application (see Annex A).
Structural Sealant Glazing can be incorporated into the product as follows:
   either vertically; or
   up to 83° from the vertical  (positive slope)
   up to 15° from the vertical onto the building face (negative slope)
NOTE      A wall has a positive slope if its outer surface faces upwards.
It gives information to the manufacturer to comply with requirements regarding design, factory production control and assembly rules.
The parts concerned in the testing are the metal profile (anodized and coated aluminium, stainless steel), the glass coated or not which shall be bonded, the sealant and mechanical restraints when required.
The testing does not apply to other framing materials.

Geklebte Glaskonstruktionen (SSGS)

Diese Europäische Norm legt das anzuwendende Verfahren zum Nachweis des mechanischen Leistungsverhaltens von geklebten Verglasungen für Türen, Fenster und Vorhangfassaden (siehe Beispiele in Anhang A) und deren Beständigkeit fest.
ANMERKUNG 1   Geklebte Verglasungen wurden vorher als geklebte Glaskonstruktionen bezeichnet.
Geklebte Verglasungen können wie folgt im Produkt integriert sein:
—   entweder vertikal angeordnet, oder
—   bis zu 83° von der Vertikalen (positive Neigung), oder
—   bis zu 15° von der Vertikalen auf der Gebäudefassade (negative Neigung).
ANMERKUNG 2   Eine Wand weist eine positive Neigung auf, wenn ihre Außenfläche nach oben zeigt.
ANMERKUNG 3   Auf nationaler Ebene können zusätzliche spezifische Sicherheitsbestimmungen gelten.
Sie liefert dem Hersteller Angaben zur Übereinstimmung mit Anforderungen bezüglich Ausführung, werkseigener Produktionskontrolle und Verglasungsvorschriften.
Die von der Prüfung betroffenen Teile sind die Metallprofile (eloxiertes und beschichtetes Aluminium, Edelstahl), beschichtetes oder unbeschichtetes Glas, das geklebt sein muss, der Klebedichtstoff und mechanische Halterungen, falls erforderlich.
Die Prüfungen gelten nicht für andere Rahmenmaterialien.
Diese Norm gilt nicht für den Glas/Glas-Verbund und Mehrscheiben-Isolierglaseinheiten.

Vitrages extérieurs collés (VEC)

La présente Norme européenne spécifie la méthode à utiliser pour vérifier les performances mécaniques des systèmes de vitrages extérieurs collés.
Elle s'applique à toutes les fenêtres et blocs portes ou façades rideaux (voir Annexe A).
Un vitrage extérieur collé peut être intégré dans le produit comme suit :
-   verticalement ; ou
-   incliné jusqu'à 83° par rapport à la verticale (pente positive) ;
-   incliné jusqu'à 15° par rapport à la verticale sur la façade du bâtiment (pente négative).
NOTE   Une façade a une pente positive si sa surface extérieure est orientée vers le haut.
Elle fournit des informations au fabricant lui permettant de satisfaire aux exigences relatives à la conception, au contrôle de la production en usine et aux règles d'assemblage.
Les parties concernées par les essais sont les profilés métalliques (aluminium anodisé et thermolaqué, acier inoxydable), le verre revêtu ou non qui doit être collé, le produit de collage ou de scellement et les dispositifs de retenue mécanique, le cas échéant.
Les essais ne s'appliquent pas aux autres matériaux d'ossature.

Sistemi strukturne zasteklitve (SSGS)

General Information

• Status: Not Published
• Public Enquiry End Date: 14-Oct-2014
• ICS: 81.040.20 - Glass in building
• ICS: 91.060.10 - Walls. Partitions. Facades
• ICS: 91.060.50 - Doors and windows
• Technical Committee: ISTP - Doors and windows
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 22-Apr-2024
• Due Date: 27-Apr-2024
• Completion Date: 22-Apr-2024
• Ref Project: prEN 16759 - Bonded Glazing for doors, windows and curtain walling - Verification of mechanical performance of bonding on aluminium and steel surfaces

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16759:2014
01-september-2014
Sistemi strukturne zasteklitve (SSGS)
Structural Sealant Glazing Systems (SSGS)
Geklebte Glaskonstruktionen (SSGS)
Vitrages extérieurs collés (VEC)
Ta slovenski standard je istoveten z: prEN 16759
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
91.060.50 Vrata in okna Doors and windows
oSIST prEN 16759:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16759:2014

---------------------- Page: 2 ----------------------
oSIST prEN 16759:2014

EUROPEAN STANDARD
DRAFT
prEN 16759
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2014
ICS 81.040.20; 91.060.10; 91.060.50
English Version
Structural Sealant Glazing Systems (SSGS)
Vitrages extérieurs collés (VEC) Geklebte Glaskonstruktionen (SSGS)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16759:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16759:2014
prEN 16759:2014 (E)
Contents
Page
Foreword .4
1 Scope .5
2 Normative references .5
3 Terms, definitions and Symbols .6
4 Component requirements .7
4.1 Glass for SSGS .7
4.2 Assembly rules for glass .7
4.3 Structural sealant.7
4.4 Anodised aluminium structural adhesion surface .7
4.4.1 Alloys of aluminium .7
4.4.2 Characteristics of the anodising .7
4.4.3 Description of the anodising process .7
4.5 Coated aluminium .8
4.6 Stainless steel .
...