SIST EN 13480-6:2012/A1:2017

Metallic industrial piping - Part 6: Additional requirements for buried piping

This European Standard specifies requirements for industrial piping either totally buried or partly buried and partly run in sleeves or similar protection. It is used in conjunction with the other six parts of
EN 13480.
Where buried piping subject to this standard connects to piping installed under other jurisdiction such as pipelines, the transition should be made at a closing element e.g. an isolating or regulating valve separating the two sections. This should be close to the boundary of the industrial site, but may be inside or outside the boundary.
Operating temperature up to 75 °C.
NOTE   For higher temperatures reference should be made to EN 13941, but it should be kept in mind, that CEN/TC 107 only deals with pre-insulated piping with temperatures up to 140 °C and diameters up to 800 mm, which is state of the art for these products.

Metallische industrielle Rohrleitungen - Teil 6: Zusätzliche Anforderungen an erdgedeckte Rohrleitungen

Tuyauteries industrielles métalliques - Partie 6 : Exigences complémentaires relatives aux tuyauteries enterrées

Kovinski industrijski cevovodi - 6. del: Dodatne zahteve za vkopane cevovode - Dopolnilo A1

General Information

• Status: Withdrawn
• Public Enquiry End Date: 02-Mar-2016
• Publication Date: 12-Apr-2017
• Withdrawal Date: 13-Dec-2017
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: TLP - Pressure vessels
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Dec-2017
• Due Date: 30-Dec-2017
• Completion Date: 14-Dec-2017
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 13480-6:2012/A1:2016 - Metallic industrial piping - Part 6: Additional requirements for buried piping

Relations

• Amends: SIST EN 13480-6:2012 - Metallic industrial piping - Part 6: Additional requirements for buried piping
• Effective Date: 01-May-2017
• Replaced By: SIST EN 13480-6:2018 - Metallic industrial piping - Part 6: Additional requirements for buried piping
• Effective Date: 08-Jun-2022
• Replaced By: SIST EN 13480-6:2018 - Metallic industrial piping - Part 6: Additional requirements for buried piping
• Effective Date: 01-Jan-2018
• Amends: SIST EN 13480-6:2012 - Metallic industrial piping - Part 6: Additional requirements for buried piping
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-6:2012/A1:2017
01-maj-2017
Kovinski industrijski cevovodi - 6. del: Dodatne zahteve za vkopane cevovode -
Dopolnilo A1
Metallic industrial piping - Part 6: Additional requirements for buried piping
Metallische industrielle Rohrleitungen - Teil 6: Zusätzliche Anforderungen an
erdgedeckte Rohrleitungen
Tuyauteries industrielles métalliques - Partie 6 : Exigences complémentaires relatives
aux tuyauteries enterrées
Ta slovenski standard je istoveten z: EN 13480-6:2012/A1:2016
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-6:2012/A1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-6:2012/A1:2017

---------------------- Page: 2 ----------------------

SIST EN 13480-6:2012/A1:2017


EN 13480-6:2012/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2016
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Metallic industrial piping - Part 6: Additional requirements
for buried piping
Tuyauteries industrielles métalliques - Partie 6: Metallische industrielle Rohrleitungen - Teil 6:
Exigences complémentaires relatives aux tuyauteries Zusätzliche Anforderungen an erdgedeckte
enterrées Rohrleitungen
This amendment A1 modifies the European Standard EN 13480-6:2012; it was approved by CEN on 12 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-6:2012/A1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 -
...

SLOVENSKI STANDARD
SIST EN 13480-6:2012/oprA1:2016
01-februar-2016
Kovinski industrijski cevovodi - 6. del: Dodatne zahteve za vkopane cevovode
Metallic industrial piping - Part 6: Additional requirements for buried piping
Metallische industrielle Rohrleitungen - Teil 6: Zusätzliche Anforderungen an
erdgedeckte Rohrleitungen
Tuyauteries industrielles métalliques - Partie 6 : Exigences complémentaires relatives
aux tuyauteries enterrées
Ta slovenski standard je istoveten z: EN 13480-6:2012/prA1
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-6:2012/oprA1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-6:2012/oprA1:2016

---------------------- Page: 2 ----------------------

SIST EN 13480-6:2012/oprA1:2016


DRAFT
EUROPEAN STANDARD
EN 13480-6:2012
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
January 2016
ICS 23.040.01
English Version

Metallic industrial piping - Part 6: Additional requirements
for buried piping
Tuyauteries industrielles métalliques - Partie 6 : Metallische industrielle Rohrleitungen - Teil 6:
Exigences complémentaires relatives aux tuyauteries Zusätzliche Anforderungen an erdgedeckte
enterrées Rohrleitungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-6:2012. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant
...