SIST EN IEC 61753-081-06:2024
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected environment (IEC 61753-081-06:2023)
Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected environment (IEC 61753-081-06:2023)
IEC 61753-081-06:2023 contains the minimum initial test and measurement requirements and severities which a fibre optic middle-scale 1 × N (16 ≤ N ≤ 64) DWDM (dense wavelength division multiplexing) arrayed waveguide grating device with channel spacing of 50 GHz, 100 GHz or 200 GHz satisfies in order to be categorized as meeting the requirements of category OP+ (extended outdoor protected environment). The requirements are given for the DWDM devices with Gaussian passband profile and flat-top passband profile. The requirements exclude the devices with dynamic electrical temperature control.
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil 081-06: Nicht mit Steckverbindern versehene mittelgroße Einmoden-Lichtwellenleiter-1 x N-DWDM-Bauteile für die Kategorie OP+ – Freiluft, geschützte Umgebung, erweitert (IEC 61753-081-06:2023)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance - Partie 081-06: Dispositifs DWDM 1 × N de milieu d’échelle à fibres optiques unimodales, non connectorisés, pour catégorie OP+ - Environnement extérieur protégé étendu (IEC 61753-081-06:2023)
IEC 61753-081-06:2023 contient les exigences initiales minimales d’essai et de mesure, ainsi que les sévérités auxquelles un dispositif fibronique à réseau de diffraction à guide d’ondes matriciel DWDM (multiplexage par répartition en longueur d'onde dense, dense wavelength division multiplexing) 1 × N (16 ≤ N ≤ 64) de milieu d'échelle avec un espacement entre canaux de 50 GHz, 100 GHz ou 200 GHz satisfait pour entrer dans une catégorie satisfaisant aux exigences de la catégorie OP+ (environnement extérieur protégé étendu). Les exigences sont données pour les dispositifs DWDM à profil passe-bande gaussien et à profil passe-bande carré. Ces exigences excluent les dispositifs avec organe de commande de température électrique dynamique.
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 081-06. del: Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N DWDM brez konektorjev za enorodovna vlakna kategorije OP+ - Razširjeno zunanje zaščiteno okolje (IEC 61753-081-06:2023)
Standard IEC 61753-081-06:2023 vsebuje minimalne zahteve in stopnje zahtevnosti glede začetnega preskusa ter meritev, ki jih mora izpolnjevati optični atenuator srednje obsežne naprave z razporejenim valovodom 1 x N (16 ≤ N ≤ 64) DWDM (zgoščeno valovnodolžinsko multipleksiranje) z medkanalskim razmikom 50 GHz, 100 GHz ali 200 GHz, da izpolnjuje zahteve kategorije OP+ (razširjeno zunanje zaščiteno okolje). Zahteve so podane za naprave za zgoščevalno dolžinsko multipleksiranje (DWDM) s profilom Gaussovega prepustnega pasu in profilom ploščatega prepustnega pasu. Zahteve ne vključujejo naprav z dinamično električno regulacijo temperature.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61753-081-06:2024
01-februar-2024
Optični spojni elementi in pasivne komponente - Izvedbeni standard - 081-06. del:
Električno krmiljeni spremenljivi optični atenuator srednje obsežne naprave 1 x N
DWDM brez konektorjev za enorodovna vlakna kategorije OP+ - Razširjeno
zunanje zaščiteno okolje (IEC 61753-081-06:2023)
Fibre optic interconnecting devices and passive components - Performance standard -
Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM
devices for category OP+ - Extended outdoor protected environment (IEC 61753-081-
06:2023)
Lichtwellenleiter – Verbindungselemente und passive Bauteile – Betriebsverhalten – Teil
081-06: Nicht mit Steckverbindern versehene mittelgroße Einmoden-Lichtwellenleiter-1 x
N-DWDM-Bauteile für die Kategorie OP+ – Freiluft, geschützte Umgebung, erweitert
(IEC 61753-081-06:2023)
Dispositifs d’interconnexion et composants passifs fibroniques - Norme de performance -
Partie 081-06: Dispositifs DWDM 1 × N de milieu d’échelle à fibres optiques unimodales,
non connectorisés, pour catégorie OP+ - Environnement extérieur protégé étendu (IEC
61753-081-06:2023)
Ta slovenski standard je istoveten z: EN IEC 61753-081-06:2023
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-081-06:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61753-081-06:2024
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-081-06:2024
EUROPEAN STANDARD EN IEC 61753-081-06
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2023
ICS 33.180.10
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 081-06: Non-connectorized single-
mode fibre optic middle-scale 1 x N DWDM devices for category
OP+ - Extended outdoor protected environment
(IEC 61753-081-06:2023)
Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive
fibroniques - Norme de performance - Partie 081-06 : Bauteile - Betriebsverhalten - Teil 081-06: Nicht mit
Dispositifs DWDM 1 × N de milieu d'échelle fibroniques Steckverbindern versehene mittelgroße Einmoden-
unimodaux, non connecteurisés, pour catégorie OP+ - Lichtwellenleiter-1 x N-DWDM-Bauteile für die Kategorie
Environnement extérieur protégé étendu OP+ - Freiluft, geschützte Umgebung, erweitert
(IEC 61753-081-06:2023) (IEC 61753-081-06:2023)
This European Standard was approved by CENELEC on 2023-12-21. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61753-081-06:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-081-06:2024
EN IEC 61753-081-06:2023 (E)
European foreword
The text of document 86B/4804/FDIS, future edition 1 of IEC 61753-081-06, prepared by SC 86B
"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-081-
06:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-21
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-21
document have to be withdrawn
Attention is drawn to the possibility that some of t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.