SIST EN 62022:2008
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
Defines an installed monitor for the control and detection of radioactivity of gamma emitters contained in recyclable or non-recyclable materials transported by vehicle, the conceptual requirements, general characteristics, mechanical characteristics, environmental conditions, minimal requirements, test procedures and documentation.
Fest installierte Monitore für die Überwachung und den Nachweis von Gammastrahlen-Emittern in von Fahrzeugen transportierten, wiederverwertbaren oder nicht wiederverwertbaren Materialien
Moniteurs fixes de contrôle et de détection d'émetteurs de rayonnements gamma contenus dans des matériaux recyclables ou non recyclables, transportés dans des véhicules
Définit un moniteur fixe pour le contrôle et la détection de radioactivité d'émetteurs gamma contenus dans des matériaux recyclables ou non recyclables transportés dans des véhicules, les exigences conceptuelles, les caractéristiques générales, les caractéristiques mécaniques, les conditions environnementales, les exigences minimales, les procédures d'essai, et la documentation.
Vgrajeni monitorji za nadzor in detekcijo sevanja gama, ki ga oddajajo za recikliranje primerni ali neprimerni materiali, transportirani z vozili (IEC 62022:2004, spremenjen)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62022:2008
01-februar-2008
Vgrajeni monitorji za nadzor in detekcijo sevanja gama, ki ga oddajajo za
recikliranje primerni ali neprimerni materiali, transportirani z vozili (IEC
62022:2004, spremenjen)
Installed monitors for the control and detection of gamma radiations contained in
recyclable or non recyclable materials transported by vehicles
Fest installierte Monitore für die Überwachung und den Nachweis von Gammastrahlen-
Emittern in von Fahrzeugen transportierten, wiederverwertbaren oder nicht
wiederverwertbaren Materialien
Moniteurs fixes de contrôle et de détection d'émetteurs de rayonnements gamma
contenus dans des matériaux recyclables ou non recyclables, transportés dans des
véhicules
Ta slovenski standard je istoveten z: EN 62022:2007
ICS:
13.280
17.240
SIST EN 62022:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62022
NORME EUROPÉENNE
July 2007
EUROPÄISCHE NORM
ICS 13.280
English version
Installed monitors for the control and detection of gamma radiations
contained in recyclable or non-recyclable materials
transported by vehicles
(IEC 62022:2004, modified)
Moniteurs fixes de contrôle et de détection Fest installierte Monitore
d'émetteurs de rayonnements gamma für die Überwachung und den Nachweis
contenus dans des matériaux recyclables von Gammastrahlen-Emittern
ou non recyclables, transportés in von Fahrzeugen transportierten,
dans des véhicules wiederverwertbaren
(CEI 62022:2004, modifiée) oder nicht wiederverwertbaren Materialien
(IEC 62022:2004, modifiziert)
This European Standard was approved by CENELEC on 2007-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62022:2007 E
---------------------- Page: 2 ----------------------
EN 62022:2007 – 2 –
Foreword
The text of the International Standard IEC 62022:2004, prepared by SC 45B, Radiation protection
instrumentation, of IEC TC 45, Nuclear instrumentation, together with the common modifications
prepared by CENELEC BTTF 111-3, Nuclear instrumentation and radiation protection
instrumentation, was submitted to the formal vote and was approved by CENELEC as EN 62022 on
2007-07-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-07-01
Clauses, subclauses, notes, tables and figures which are additional to those in IEC 62022:2004 are
prefixed “Z”.
Annex ZA has been added by CENELEC.
__________
---------------------- Page: 3 ----------------------
– 3 – EN 62022:2007
Endorsement notice
The text of the International Standard IEC 62022:2004 was approved by CENELEC as a European
Standard with agreed common modifications as given below.
COMMON MODIFICATIONS
Replace “operational setting” with “operating setting” all over the document.
2 Normative references
Replace the references to IEC 61000-4 series with their latest editions.
4 Design requirements
4.1 General characteristics
Add at the end of the first paragraph: “. threshold. The alarm threshold is not a fixed value,
but an expected value depending on the measuring conditions, e.g. the material and energy
ranges expected.”
Replace the last paragraph with:
In the case of the dynamic mode (the vehicle passing the equipment) alarm occurs when
there is a statistically significant increase in the detected fluence rate of gamma photons
when the vehicle is passing the detection system. This fluence may however be less than
that due to normal background.
Add a new paragraph below the current text, reading:
In the case of the static mode (vehicle stationary within the equipment) an alarm occurs
when the fluence rate of gamma photons detected is greater than a pre-established level.
4.2 Configuration
Replace the first paragraph with:
The equipment is composed of one or several radiation detection assemblies adjacent to
the vehicle in the static mode and close to the vehicle whilst it passes in the dynamic mode,
and an information treatment assembly, linked to an alarm assembly.
Replace the fifteenth paragraph with:
Sensors should indicate the approach of the vehicle to inhibit any further storage of
background information. Further sensors should indicate the vehicle is in the monitoring
position or passing through the monitoring area.
Replace the last paragraph with:
Equipment shall be provided with appropriate facilities for indicating faults, for example loss
of detector voltage of failure of electronics. The number and type of faults to be indicated
shall be by agreement between the manufacturer and purchaser.
4.3 Indication facilities
Begin the penultimate paragraph with “It should be possible to transfer these data to an
additional …”
---------------------- Page: 4 ----------------------
EN 62022:2007 – 4 –
5 Test procedures
5.1 General test conditions
5.1.1 Nature of tests
In the last two bullets, replace “reference load” with “reference load (see 5.1.6)”.
5.1.3 Tests performed under standard test conditions
Replace the first sentence with “Tests which are performed under standard test conditions
are listed in Table 2, the table indicates, for each characteristic under test …”
5.1.6 Test vehicle
Replace the fifth paragraph with:
Recommended vehicles and reference loads are given in Annex A.
In the last paragraph, replace “wood” with “wood (wood for non-metal applications only)”.
5.2 Radiation characteristics
5.2.2 Reference radioactive sources
In item a), change the order of second and third paragraphs.
In item b), add a further paragraph, reading:
These reference radioactive sources shall be used when the equipment is tested with a test
vehicle.
5.2.4 Sensitivity of the radiation detection assembly for radioactive sources placed in free
air
5.2.4.2 Testing method
In the second paragraph, replace “1 m” with “2 m”.
5.4 Electrical characteristics
5.4.1 Requirements for power supplies
In the last sentence, replace “indications of the quantities” with “indicated count rate” and
“10 %” with “± 5 %”.
5.4.2 Method of test
In the last sentence of the third paragraph and in items a) and b), replace “10 %” with
“± 5 %”.
5.5 Mechanical characteristics
5.5.1 Mechanical shocks
Add a further paragraph below the current text, reading:
The detection assemblies should be protected by physical barriers.
---------------------- Page: 5 ----------------------
– 5 – EN 62022:2007
5.5.2 Vibration test
5.5.2.1 Requirements
Replace “The indication of the equipment” with “The count rate”.
Add at the end of the paragraph “… and no alarm shall appear.”
5.5.2.2 Method of test
Replace in the third paragraph “or other changes” with “and no physical damages”.
5.7 Electromagnetic compability
5.7.1 Radiated electromagnetic fields
5.7.1.1 Requirements
Replace “15 %” with “10 %”.
5.7.1.2 Method of test
Replace in the second paragraph “1 GHz” with “6 GHz”, replace “frequencies (27),” with
“41 frequencies” and replace “and 1 000 MHz” with “1 000, 1 400, 1 500, 1 600, 1 800,
2 000, 2 200, 2 400, 3 000, 5 100, 5 300, 5 500, 5 700 and 5 900 MHz”.
Replace the last sentence of the last paragraph with “There shall be no unintended change
in the operating settings from before to after the test and no false indications during or after
the test.”
5.7.2 Conducted disturbances induced by bursts and radio-frequencies
5.7.2.1 Requirements
Replace “15 %” with “10 %”.
5.7.2.2 Method of test
Replace “15 %” with “10 %”.
Replace the last sentence with “There shall be no unintended change in the operating
settings from before to after the test and no false indications during or after the test.”
5.7.3 Surges
5.7.3.1 Requirements
Replace “15 %” with “10 %”.
5.7.3.2 Method of test
Replace “15 %” with “10 %”.
Replace the last sentence with “There shall be no unintended change in the operating
settings from before to after the test and no false indications during or after the test.”
---------------------- Page: 6 ----------------------
EN 62022:2007 – 6 –
5.7.4 Voltage dips and short interruptions
5.7.4.1 Requirements
Replace “15 %” with “10 %”.
5.7.4.2 Method of test
Replace “15 %” with “10 %”.
Replace the last sentence with “There shall be no unintended change in the operating
settings from before to after the test and no false indications during or after the test.”
6 Documentation
6.2 Certificate
Replace “measure” with “detect” in the third bullet.
Add a further bullet below the current ones, reading:
– detailed description of the reference vehicle and reference load used for the testing.
Table 2 Tests performed with variations of influence quantities
In the second line and third line, replace “10 %” with “5 %”.
In the line “vibration test”, add “and no alarm” behind “20 %”.
In the last four lines, replace “15 %” with “10 %”.
Annex A Test vehicle
Replace the headline with “Recommended test vehicles and reference loads”
Add a note to Figure A.1, reading:
NOTE Z1 The reference point of the detector is 2 m above ground, see 5.2.4.2.
Replace the title of Figure A.2 with “Container as reference load – alternative to the test
vehicle of Figure A.1”.
---------------------- Page: 7 ----------------------
– 7 – EN 62022:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 60038 (mod) 1983 IEC standard voltages HD 472 S1 1989
+ corr. February 2002
A1 1994 - -
A2 1997 - -
IEC 60050-151 2001 International Electrotechnical - -
Vocabulary (IEV) -
Part 151: Electrical and magnetic
devices
IEC 60050-393 1996 International Electrotechnology - -
Vocabulary (IEV) -
Chapter 393: Nuclear instrumentation:
Physical phenomena and basic
concepts
IEC 60050-394 1995 International Electrotechnical - -
Vocabulary (IEV) -
Chapter 394: Nuclear instrumentation:
Instruments
IEC 60068-2-27 1987 Basic environmental testing EN 60068-2-27 1993
procedures -
Part 2: Tests - Test Ea and guidance:
Shock
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - EN 61000-4-3 2006
Part 4-3 : Testing and measurement
techniques - Radiated, radio-
frequency, electromagnetic field
immunity test
IEC 61000-4-4 2004 Electromagnetic compatibility (EMC) - EN 61000-4-4 2004
Part 4-4: Testing and measurement
techniques - Electrical fast
transient/burst immunity test
IEC 61000-4-5 2005 Electromagnetic compatibility (EMC) - EN 61000-4-5 2006
Part 4-5: Testing and measurement
techniques - Surge immunity test
IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - EN 61000-4-6 2007
Part 4-6: Testing and measurement
techniques - Immunity to conducted
disturbances, induced by radio-
frequency fields
———————
1)
The title of HD 472 S1 is: Nominal voltages for low voltage public electricity supply systems.
---------------------- Page: 8 ----------------------
EN 62022:2007 – 8 –
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - EN 61000-4-11 2004
Part 4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
IEC 61187 (mod) 1993 Electrical and electronic measuring EN 61187 1994
equipment - Documentation + corr. March 1995
ISO 4037-1 1996 X and gamma reference radiation for - -
calibrating dosemeters and doserate
meters and for determining their
response as a function of photon
energy -
Part 1: Radiation characteristics and
production methods
---------------------- Page: 9 ----------------------
NORME CEI
INTERNATIONALE IEC
62022
INTERNATIONAL
Première édition
STANDARD
First edition
2004-07
Moniteurs fixes de contrôle et de détection
d'émetteurs de rayonnements gamma
contenus dans des matériaux recyclables
ou non recyclables, transportés dans
des véhicules
Installed monitors for the control and detection
of gamma radiations contained in recyclable or
non-recyclable materials transported by vehicles
” IEC 2004 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale T
PRICE CODE
International Electrotechnical Commission
ɆɟɠɞɭɧɚɪɨɞɧɚɹɗɥɟɤɬɪɨɬɟɯɧɢɱɟɫɤɚɹɄɨɦɢɫɫɢɹ
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 10 ----------------------
62022 ” IEC:2004 – 3 –
CONTENTS
FOREWORD.7
1 Scope .11
2 Normative references .13
3 Terms, definitions, quantities and units .13
3.1 Terms and definitions .13
3.2 Quantities and units.17
4 Design requirements.19
4.1 General characteristics .19
4.2 Configuration.19
4.3 Indication facilities .21
4.4 Vehicle speed.23
5 Test procedures .23
5.1 General test conditions .23
5.1.1 Nature of tests .23
5.1.2 Reference conditions and standard test conditions.25
5.1.3 Tests performed under standard test conditions.25
5.1.4 Tests performed with variation of influence quantities .25
5.1.5 Statistical fluctuations .25
5.1.6 Test vehicle .25
5.2 Radiation characteristics.27
5.2.1 Reference gamma radiation.27
5.2.2 Reference radioactive sources .27
5.2.3 Background effect .27
5.2.4 Sensitivity of the radiation detection assembly for radioactive sources
placed in free air .29
5.2.5 Alarm test with test vehicle.29
5.2.6 False alarm test with test vehicle.31
5.3 Overload test.31
5.3.1 Requirements .31
5.3.2 Method of test.31
5.4 Electrical characteristics .31
5.4.1 Requirements for power supplies.31
5.4.2 Method of test.33
5.5 Mechanical characteristics .33
5.5.1 Mechanical shocks.33
5.5.2 Vibration test .33
5.6 Environmental characteristics .35
5.6.1 Ambient temperature.35
5.6.2 Relative humidity .35
5.6.3 Sealing .37
5.6.4 External magnetic fields .37
5.6.5 Storage.37
---------------------- Page: 11 ----------------------
62022 ” IEC:2004 – 5 –
5.7 Electromagnetic compatibility.37
5.7.1 Radiated electromagnetic fields.37
5.7.2 Conducted disturbances induced by bursts and radio-frequencies .39
5.7.3 Surges.39
5.7.4 Voltage dips and short interruptions .39
6 Documentation .41
6.1 Type test report .41
6.2 Certificate.41
6.3 Operation and maintenance manual .41
Annex A (informative) Test vehicle .47
---------------------- Page: 12 ----------------------
62022 ” IEC:2004 – 7 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INSTALLED MONITORS FOR THE CONTROL AND DETECTION
OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR
NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62022 has been prepared by subcommittee 45B: Radiation
protection instrumentation, of IEC technical committee 45: Nuclear instrumentation.
The text of this standard is based on the following documents:
FDIS Report on voting
45B/443/FDIS 45B/445/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
---------------------- Page: 13 ----------------------
62022 ” IEC:2004 – 9 –
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed;
• withdrawn;
• replaced by a revised edition, or
• amended.
---------------------- Page: 14 ----------------------
62022 ” IEC:2004 – 11 –
INSTALLED MONITORS FOR THE CONTROL AND DETECTION
OF GAMMA RADIATIONS CONTAINED IN RECYCLABLE OR
NON-RECYCLABLE MATERIALS TRANSPORTED BY VEHICLES
1 Scope
This International Standard is applicable to installed monitors for the control and detection of
radioactivity of gamma emitters contained in recyclable or non-recyclable material waste to be
transported by vehicles.
This standard is designed to provide the purchaser with an indication of the performance of
the equipment in detecting radioactive sources left in the material being monitored, and not to
measure quantity.
This standard does not apply to hand-held equipment. It is not applicable to the monitoring of
materials on conveyors, in grabs or being moved by electromagnets.
This standard is not intended for the monitoring of radioactive waste or detection of fissile
materials.
The object of this standard is to define an installed monitor for the control and detection of
radioactivity of gamma emitters contained in recyclable or non-recyclable materials
transported by vehicle, the conceptual requirements, general characteristics, mechanical
characteristics, environmental conditions, minimal requirements, test procedures and
documentation.
The selection of the location of the instrumentation on the site needs to be optimised to
achieve the best performance of measurement, but this is beyond the scope of this standard.
The gamma radiation detected by these monitors may be emitted by one or several discrete
radioactive sources included in the loading, or by the presence of radioactive material in the
vehicle being monitored.
These monitors are to be used outdoors. The radiations detected are gamma emissions of
energy at least from 50 keV to 1 500 keV.
It is advantageous if the equipment can give the approximate location of a radioactive source
but this is not a mandatory requirement of this standard.
Conformance with the requirements of this standard is no guarantee that a radioactive source
will always be discovered. The shielding of the high-density materials will mean radioactive
substances buried deep in the material could be missed.
---------------------- Page: 15 ----------------------
62022 ” IEC:2004 – 13 –
2 Normative references
The following referenced documents should be used for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of
the referenced document (including any amendments) applies.
IEC 60038:1983, IEC standard voltages
Amendment 1 (1994)
Amendment 2 (1997)
IEC 60050(151):2001, International Electrotechnical Vocabulary (IEV) – Chapter 151: Electrical
and magnetic devices
IEC 60050(393):1996, International Electrotechnical Vocabulary (IEV) – Chapter 393: Nuclear
instrumentation: Physical phenomena and basic concepts
IEC 60050(394):1995, International Electrotechnical Vocabulary (IEV) – Chapter 394: Nuclear
instrumentation: Instruments
IEC 60068-2-27:1987, Basic environmental testing procedures – Part 2: Tests – Test Ea and
guidance: Shock
IEC 61000-4-3:2002, Electromagnetic compatibility (EMC) – Part 4-3: Testing and measure-
ment techniques – Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-4:1995, Electromagnetic compatibility (EMC) – Part 4: Testing and measurement
techniques – Section 4: Electrical fast transient/burst immunity test. Basic EMC publication
IEC 61000-4-5: Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement
techniques – Surge immunity test
IEC 61000-4-6:2003, Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement
techniques – Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-11, Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement
techniques – Voltages dips, short interruptions and voltage variation immunity tests
IEC 61187:1993, Electrical and electronic measuring equipment – Documentation
ISO 4037-1:1996, X and gamma reference radiation for calibration dosimeters and doserate
meters and for determining their response as a function of photon energy – Part 1: Radiation
characteristics and production methods
3 Terms, definitions, quantities and units
3.1 Terms and definitions
For the purposes of this document, the terms and defin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.