Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement

This European Standard specifies a method for determining the thixotropy of products and systems intended for the protection of reinforcement.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Ablaufneigung von Produkten für den Schutz der Bewehrung

Diese Europäische Norm gehört zu einer Reihe von Normen, die sich mit Produkten und Systemen für Schutz und die Instandsetzung von Betontragwerken beschäftigt. Es wird eine Methode zur Bestimmung der Ablaufneigung von Produkten für den Schutz der Bewehrung angegeben.

Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la thixotropie des produits de protection des armatures

La présente Norme Européenne fixe une méthode permettant de déterminer la thixotropie des produits et systemes de protection de l'armature.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode – Določevanje tiksotropičnosti proizvodov za zaščito armature

General Information

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003

Buy Standard

Standard
EN 13062:2003
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XUHProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Ablaufneigung von Produkten für den Schutz der BewehrungProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la thixotropie des produits de protection des armaturesProducts and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13062:2003SIST EN 13062:2003en01-december-2003SIST EN 13062:2003SLOVENSKI
STANDARD



SIST EN 13062:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13062May 2003ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructure - Test method - Determination of thixotropy of productsfor protection of reinforcementProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essais - Détermination dela thixotropie des produits de protection des armaturesProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Ablaufneigung von Produkten für denSchutz der BewehrungThis European Standard was approved by CEN on 14 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13062:2003 ESIST EN 13062:2003



EN 13062:2003 (E)2ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.44Apparatus.45Sampling.46Procedure.57Expression of Results.58Precision.59Test report.6Bibliography.7SIST EN 13062:2003



EN 13062:2003 (E)3ForewordThis document (EN 13062:2003) has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2003, and conflicting national standards shall be withdrawn at the latestby November 2003.This European Standard is one of a series dealing with products and systems for the protection and repair ofconcrete structures.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13062:2003



EN 13062:2003 (E)41 ScopeThi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.